From: Hyeonki Hong Date: Thu, 18 Jun 2020 02:59:22 +0000 (+0900) Subject: pinctrl: meson: fix drive strength register and bit calculation X-Git-Tag: v5.15~3141^2~59 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f088ab6d4f4ce49d422c220074b7e605f54e2299;p=platform%2Fkernel%2Flinux-starfive.git pinctrl: meson: fix drive strength register and bit calculation If a GPIO bank has greater than 16 pins, PAD_DS_REG is split into two or more registers. However, when register and bit were calculated, the first register defined in the bank was used, and the bit was calculated based on the first pin. This causes problems in setting the driving strength. The following method was used to solve this problem: A bit is calculated first using predefined strides. Then, If the bit is 32 or more, the register is changed by the quotient of the bit divided by 32. And the bit is set to the remainder. Signed-off-by: Hyeonki Hong Link: https://lore.kernel.org/r/20200618025916.GA19368@home-desktop Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 079f8ee..20683cd 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -56,6 +56,10 @@ #include "../pinctrl-utils.h" #include "pinctrl-meson.h" +static const unsigned int meson_bit_strides[] = { + 1, 1, 1, 1, 1, 2, 1 +}; + /** * meson_get_bank() - find the bank containing a given pin * @@ -96,8 +100,9 @@ static void meson_calc_reg_and_bit(struct meson_bank *bank, unsigned int pin, { struct meson_reg_desc *desc = &bank->regs[reg_type]; - *reg = desc->reg * 4; - *bit = desc->bit + pin - bank->first; + *bit = (desc->bit + pin - bank->first) * meson_bit_strides[reg_type]; + *reg = (desc->reg + (*bit / 32)) * 4; + *bit &= 0x1f; } static int meson_get_groups_count(struct pinctrl_dev *pcdev) @@ -314,7 +319,6 @@ static int meson_pinconf_set_drive_strength(struct meson_pinctrl *pc, return ret; meson_calc_reg_and_bit(bank, pin, REG_DS, ®, &bit); - bit = bit << 1; if (drive_strength_ua <= 500) { ds_val = MESON_PINCONF_DRV_500UA; @@ -441,7 +445,6 @@ static int meson_pinconf_get_drive_strength(struct meson_pinctrl *pc, return ret; meson_calc_reg_and_bit(bank, pin, REG_DS, ®, &bit); - bit = bit << 1; ret = regmap_read(pc->reg_ds, reg, &val); if (ret)