From: Marc Zyngier Date: Mon, 1 Aug 2016 09:54:15 +0000 (+0100) Subject: clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered X-Git-Tag: v4.8-rc2~11^2~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=f005bd7e3b84a353475a2895e2c7686a66297d87;p=platform%2Fkernel%2Flinux-exynos.git clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered The ARM architected timer produces level-triggered interrupts (this is mandated by the architecture). Unfortunately, a number of device-trees get this wrong, and expose an edge-triggered interrupt. Until now, this wasn't too much an issue, as the programming of the trigger would fail (the corresponding PPI cannot be reconfigured), and the kernel would be happy with this. But we're about to change this, and trust DT a lot if the driver doesn't provide its own trigger information. In that context, the timer breaks badly. While we do need to fix the DTs, there is also some userspace out there (kvmtool) that generates the same kind of broken DT on the fly, and that will completely break with newer kernels. As a safety measure, and to keep buggy software alive as well as buying us some time to fix DTs all over the place, let's check what trigger configuration has been given us by the firmware. If this is not a level configuration, then we know that the DT/ACPI configuration is bust, and we pick some defaults which won't be worse than the existing setup. Signed-off-by: Marc Zyngier Cc: Andrew Lunn Cc: Liu Gang Cc: Mark Rutland Cc: Masahiro Yamada Cc: Wenbin Song Cc: Mingkai Hu Cc: Florian Fainelli Cc: Kevin Hilman Cc: Daniel Lezcano Cc: Michal Simek Cc: Jon Hunter Cc: arm@kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-arm-kernel@lists.infradead.org Cc: Sebastian Hesselbarth Cc: Jason Cooper Cc: Ray Jui Cc: "Hou Zhiqiang" Cc: Tirumalesh Chalamarla Cc: linux-samsung-soc@vger.kernel.org Cc: Yuan Yao Cc: Jan Glauber Cc: Gregory Clement Cc: linux-amlogic@lists.infradead.org Cc: soren.brinkmann@xilinx.com Cc: Rajesh Bhagat Cc: Scott Branden Cc: Duc Dang Cc: Kukjin Kim Cc: Carlo Caione Cc: Dinh Nguyen Link: http://lkml.kernel.org/r/1470045256-9032-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 28bce3f..5770054 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -8,6 +8,9 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#define pr_fmt(fmt) "arm_arch_timer: " fmt + #include #include #include @@ -370,16 +373,33 @@ static bool arch_timer_has_nonsecure_ppi(void) arch_timer_ppi[PHYS_NONSECURE_PPI]); } +static u32 check_ppi_trigger(int irq) +{ + u32 flags = irq_get_trigger_type(irq); + + if (flags != IRQF_TRIGGER_HIGH && flags != IRQF_TRIGGER_LOW) { + pr_warn("WARNING: Invalid trigger for IRQ%d, assuming level low\n", irq); + pr_warn("WARNING: Please fix your firmware\n"); + flags = IRQF_TRIGGER_LOW; + } + + return flags; +} + static int arch_timer_starting_cpu(unsigned int cpu) { struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt); + u32 flags; __arch_timer_setup(ARCH_CP15_TIMER, clk); - enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], 0); + flags = check_ppi_trigger(arch_timer_ppi[arch_timer_uses_ppi]); + enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], flags); - if (arch_timer_has_nonsecure_ppi()) - enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0); + if (arch_timer_has_nonsecure_ppi()) { + flags = check_ppi_trigger(arch_timer_ppi[PHYS_NONSECURE_PPI]); + enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], flags); + } arch_counter_set_user_access(); if (evtstrm_enable)