From: Jaehoon Chung <jh80.chung@samsung.com>
Date: Thu, 9 Jun 2022 04:06:28 +0000 (+0900)
Subject: scripts: tizen: sd_fusing: separate rpi3 and rpi4
X-Git-Tag: accepted/tizen/unified/20231106.171643~121
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=efa3fddff7dccb74e24953287c7f478f7a776c30;p=platform%2Fkernel%2Fu-boot.git

scripts: tizen: sd_fusing: separate rpi3 and rpi4

RPi4 will have other partition layout.
It can't be used same fusing scsript about rpi3/4.

Change-Id: Ie16ee56a74612889107214ac19de44548eb7f1ee
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---

diff --git a/scripts/tizen/sd_fusing_rpi3.sh b/scripts/tizen/sd_fusing_rpi3.sh
index f102f63..8c2e227 100755
--- a/scripts/tizen/sd_fusing_rpi3.sh
+++ b/scripts/tizen/sd_fusing_rpi3.sh
@@ -403,7 +403,7 @@ function check_device () {
 
 function print_logo () {
 	echo ""
-	echo "Raspberry Pi downloader, version 2.2.1"
+	echo "Only Raspberry Pi3 downloader, version 2.2.1"
 	echo ""
 }
 
diff --git a/scripts/tizen/sd_fusing_rpi4.sh b/scripts/tizen/sd_fusing_rpi4.sh
new file mode 100755
index 0000000..d5f1b42
--- /dev/null
+++ b/scripts/tizen/sd_fusing_rpi4.sh
@@ -0,0 +1,463 @@
+#!/bin/bash
+
+declare FORMAT=""
+declare DEVICE=""
+declare -i OLD_DD=0
+
+# Binaires array for fusing
+declare -a FUSING_BINARY_ARRAY
+declare -i FUSING_BINARY_NUM=0
+
+declare CONV_ASCII=""
+declare -i FUS_ENTRY_NUM=0
+
+# binary name | part number | bs | label | fs type
+declare -a PART_TABLE=(
+	"boot.img"			1	4M	boot			vfat
+	"rootfs.img"			2	4M	rootfs			ext4
+	"system-data.img"		3	4M	system-data		ext4
+	"user.img"			5	4M	user			ext4
+	"modules.img"			6	4M	modules			ext4
+	"ramdisk.img"			7	4M	ramdisk			ext4
+	"ramdisk-recovery.img"		8	4M	ramdisk-recovery	ext4
+	"hal.img"			10	4M	hal			ext4
+	)
+
+declare -r -i PART_TABLE_COL=5
+declare -r -i PART_TABLE_ROW=${#PART_TABLE[*]}/${PART_TABLE_COL}
+
+# partition table support
+function get_index_use_name () {
+	local -r binary_name=$1
+
+	for ((idx=0;idx<$PART_TABLE_ROW;idx++)); do
+		if [ ${PART_TABLE[idx * ${PART_TABLE_COL} + 0]} == "$binary_name" ]; then
+			return $idx
+		fi
+	done
+
+	# return out of bound index
+	return $idx
+}
+
+function print_message () {
+	local color=$1
+	local message=$2
+
+	tput setaf $color
+	tput bold
+	echo ""
+	echo $message
+	tput sgr 0
+}
+
+function check_ddversion () {
+	# NOTE
+	# before coreutils dd 8.24, dd doesn't support "status=progress"
+	# and the option causes fusing failure. For backward compatibility,
+	# do not use the option for old dd
+	local version=(`dd --version | head -1 | grep -o '[0-9]\+'`)
+	local major=${version[0]}
+	local minor=${version[1]}
+
+	if [ $major -lt 8 ];  then
+		OLD_DD=1
+	elif [ $major -eq 8 -a $minor -lt 24 ];  then
+		OLD_DD=1
+	fi
+}
+
+function fusing_image () {
+	local -r fusing_img=$1
+
+	# get binary info using basename
+	get_index_use_name $(basename "$fusing_img")
+	local -r -i part_idx=$?
+
+	if [ $part_idx -ne $PART_TABLE_ROW ];then
+		local -r num=${PART_TABLE[${part_idx} * ${PART_TABLE_COL} + 1]}
+		if [ "${num}" == "" ]; then
+			local -r blktype=disk
+		else
+			local -r blktype=part
+		fi
+		local -r device=/dev/`lsblk ${DEVICE} -o TYPE,KNAME | awk "/^${blktype}.*[a-z]${num}\$/ { print \\\$2 }"`
+		local -r bs=${PART_TABLE[${part_idx} * ${PART_TABLE_COL} + 2]}
+	else
+		echo "Not supported binary: $fusing_img"
+		return
+	fi
+
+	if ! [ -b "$device" ]; then
+		print_message 1 "$device is not a block device."
+		exit 1
+	fi
+
+	local -r input_size=`du -b $fusing_img | awk '{print $1}'`
+	local -r input_size_mb=`expr $input_size / 1024 / 1024`
+
+	print_message 2 "[Fusing $1 ($input_size_mb MiB)]"
+	if [ "$blktype" == "part" ]; then
+		local MOUNT_PART=`mount | grep $device`
+		if [ "$MOUNT_PART" != "" ]; then
+			umount $device
+		fi
+	fi
+	if [ $OLD_DD == 1 ]; then
+		dd if=$fusing_img | pv -s $input_size | dd of=$device bs=$bs
+	else
+		dd if=$fusing_img of=$device bs=$bs status=progress oflag=direct
+	fi
+
+	local -r fstype=`blkid -o value -s TYPE $device`
+	if [[ "$fstype" =~ "ext" ]]; then
+		resize2fs -f $device
+	fi
+}
+
+function fuse_image_tarball () {
+	local -r filepath=$1
+	local -r temp_dir="tar_tmp"
+
+	mkdir -p $temp_dir
+	tar xvf $filepath -C $temp_dir
+	cd $temp_dir
+
+	for file in *
+	do
+		fusing_image $file
+	done
+
+	cd ..
+	rm -rf $temp_dir
+	eval sync
+}
+
+function fuse_image () {
+
+	if [ "$FUSING_BINARY_NUM" == 0 ]; then
+		return
+	fi
+
+	for ((fuse_idx = 0 ; fuse_idx < $FUSING_BINARY_NUM ; fuse_idx++))
+	do
+		local filename=${FUSING_BINARY_ARRAY[fuse_idx]}
+
+		case "$filename" in
+		    *.tar | *.tar.gz)
+			fuse_image_tarball $filename
+			;;
+		    *)
+			fusing_image $filename
+			;;
+		esac
+	done
+	echo ""
+}
+
+# partition format
+function mkpart_3 () {
+	# NOTE: if your sfdisk version is less than 2.26.0, then you should use following sfdisk command:
+	# sfdisk --in-order --Linux --unit M $DISK <<-__EOF__
+
+	# NOTE: sfdisk 2.26 doesn't support units other than sectors and marks --unit option as deprecated.
+	# The input data needs to contain multipliers (MiB) instead.
+	local version=(`sfdisk -v | grep -o '[0-9]\+'`)
+	local major=${version[0]}
+	local minor=${version[1]}
+	local sfdisk_new=0
+	local support_delete=0
+
+	if [ $major -gt 2 ];  then
+		sfdisk_new=1
+	else
+		if [ $major -eq 2 -a $minor -ge 26 ];  then
+			sfdisk_new=1
+			if [ $major -eq 2 -a $minor -ge 28 ]; then
+				support_delete=1
+			fi
+		fi
+	fi
+
+	if [ $sfdisk_new == 0 ]; then
+		echo "$(tput setaf 3)$(tput bold)NOTICE: Your sfidk ${version[0]}.${version[1]}  version is too old. It can do unstable behavior!"
+		tput sgr 0
+		echo ""
+
+	fi
+
+	local -r DISK=$DEVICE
+	local -r SIZE=`sfdisk -s $DISK`
+	local -r SIZE_MB=$((SIZE >> 10))
+
+	local -r BOOT_SZ=64
+	local -r ROOTFS_SZ=3072
+	local -r DATA_SZ=1344
+	local -r MODULE_SZ=32
+	local -r RAMDISK_SZ=32
+	local -r RAMDISK_RECOVERY_SZ=32
+	local -r INFORM_SZ=8
+	local -r HAL_SZ=256
+	local -r RESERVED2_SZ=125
+	local -r EXTEND_SZ=12
+
+	let "USER_SZ = $SIZE_MB - $BOOT_SZ - $ROOTFS_SZ - $DATA_SZ - $MODULE_SZ - $RAMDISK_SZ - $RAMDISK_RECOVERY_SZ - $INFORM_SZ - $EXTEND_SZ - $HAL_SZ - $RESERVED2_SZ"
+
+	local -r BOOT=${PART_TABLE[0 * ${PART_TABLE_COL} + 3]}
+	local -r ROOTFS=${PART_TABLE[1 * ${PART_TABLE_COL} + 3]}
+	local -r SYSTEMDATA=${PART_TABLE[2 * ${PART_TABLE_COL} + 3]}
+	local -r USER=${PART_TABLE[3 * ${PART_TABLE_COL} + 3]}
+	local -r MODULE=${PART_TABLE[4 * ${PART_TABLE_COL} + 3]}
+	local -r RAMDISK=${PART_TABLE[5 * ${PART_TABLE_COL} + 3]}
+	local -r RAMDISK_RECOVERY=${PART_TABLE[6 * ${PART_TABLE_COL} + 3]}
+	local -r INFORM=inform
+	local -r HAL=${PART_TABLE[7 * ${PART_TABLE_COL} + 3]}
+	local -r RESERVED2=reserved2
+
+	if [[ $USER_SZ -le 100 ]]
+	then
+		echo "We recommend to use more than 4GB disk"
+		exit 0
+	fi
+
+	echo "================================================"
+	echo "Label			dev		size"
+	echo "================================================"
+	echo $BOOT"			" $DISK"1	" $BOOT_SZ "MB"
+	echo $ROOTFS"			" $DISK"2	" $ROOTFS_SZ "MB"
+	echo $SYSTEMDATA"		" $DISK"3	" $DATA_SZ "MB"
+	echo "[Extend]""		" $DISK"4"
+	echo " "$USER"			" $DISK"5	" $USER_SZ "MB"
+	echo " "$MODULE"		" $DISK"6	" $MODULE_SZ "MB"
+	echo " "$RAMDISK"		" $DISK"7	" $RAMDISK_SZ "MB"
+	echo " "$RAMDISK_RECOVERY"	" $DISK"8	" $RAMDISK_RECOVERY_SZ "MB"
+	echo " "$INFORM"			" $DISK"9	" $INFORM_SZ "MB"
+	echo " "$HAL"			" $DISK"10	" $HAL_SZ "MB"
+	echo " "$RESERVED2"		" $DISK"11	" $RESERVED2_SZ "MB"
+
+	local MOUNT_LIST=`mount | grep $DISK | awk '{print $1}'`
+	for mnt in $MOUNT_LIST
+	do
+		umount $mnt
+	done
+
+	echo "Remove partition table..."
+	dd if=/dev/zero of=$DISK bs=512 count=32 conv=notrunc
+
+	if [ $sfdisk_new == 1 ]; then
+		if [ $support_delete == 1 ]; then
+			sfdisk --delete $DISK
+		fi
+
+		sfdisk $DISK <<-__EOF__
+		4MiB,${BOOT_SZ}MiB,0xE,*
+		8MiB,${ROOTFS_SZ}MiB,,-
+		8MiB,${DATA_SZ}MiB,,-
+		8MiB,,E,-
+		,${USER_SZ}MiB,,-
+		,${MODULE_SZ}MiB,,-
+		,${RAMDISK_SZ}MiB,,-
+		,${RAMDISK_RECOVERY_SZ}MiB,,-
+		,${INFORM_SZ}MiB,,-
+		,${HAL_SZ}MiB,,-
+		,${RESERVED2_SZ}MiB,,-
+		__EOF__
+	else
+		# calculate start positions for alignment for extended partitions
+		let "USER_START = 4 + $BOOT_SZ + $ROOTFS_SZ + $DATA_SZ + 1"
+		let "MODULE_START = $USER_START + $USER_SZ + 1"
+		let "RAMDISK_START = $MODULE_START + $MODULE_SZ + 1"
+		let "RAMDISK_RECOVERY_START = $RAMDISK_START + $RAMDISK_SZ + 1"
+		let "INFORM_START = $RAMDISK_RECOVERY_START + $RAMDISK_RECOVERY_SZ + 1"
+		let "HAL_START = $INFORM_START + $INFORM_SZ + 1"
+		let "RESERVED2_START = $HAL_START + $HAL_SZ + 1"
+
+		sfdisk --in-order --Linux --unit M $DISK <<-__EOF__
+		4,$BOOT_SZ,0xE,*
+		,$ROOTFS_SZ,,-
+		,$DATA_SZ,,-
+		,,E,-
+		$USER_START,$USER_SZ,,-
+		$MODULE_START,$MODULE_SZ,,-
+		$RAMDISK_START,$RAMDISK_SZ,,-
+		$RAMDISK_RECOVERY_START,$RAMDISK_RECOVERY_SZ,,-
+		$INFORM_START,$INFORM_SZ,,-
+		$HAL_START,$HAL_SZ,,-
+		$RESERVED2_START,$RESERVED2_SZ,,-
+		__EOF__
+	fi
+
+	for ((idx=0;idx<$PART_TABLE_ROW;idx++)); do
+		local PART=/dev/`lsblk ${DISK} -o TYPE,KNAME | awk "/^part.*[a-z]${PART_TABLE[$idx * ${PART_TABLE_COL} + 1]}\$/ { print \\\$2 }"`
+		if [ "${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]}" == "vfat" ]; then
+			mkfs.vfat -F 16 ${PART} -n ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]}
+			if [ $? -eq 1 ]; then
+				echo "Failed to format as FAT filesystem"
+				exit -1
+			fi
+		elif [ "${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]}" == "ext4" ]; then
+			mkfs.ext4 -q ${PART} -L ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]} -F
+		else
+			echo "Skip to format for unknown filesystem type ${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]} for part$idx, ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]}"
+		fi
+	done
+
+	local -r PART9=/dev/`lsblk ${DISK} -o TYPE,KNAME | grep part | awk '{ print $2 }' | grep -G "[a-z]9\$"`
+	mkfs.ext4 -q ${PART9} -L $INFORM -F
+
+	# create "reboot-param.bin" file in inform partition for passing reboot parameter
+	# It should be done only once upon partition format.
+	if [ -d mnt_tmp ]; then
+		echo "Remove the existing mnt_tmp directory!!"
+		rm -rf mnt_tmp
+	fi
+	mkdir mnt_tmp
+	mount -t ext4 ${PART9} ./mnt_tmp
+	touch ./mnt_tmp/reboot-param.bin
+	sync
+	umount ./mnt_tmp
+	rmdir mnt_tmp
+
+	local -r PART11=/dev/`lsblk ${DISK} -o TYPE,KNAME | grep part | awk '{ print $2 }' | grep -G "[a-z]11\$"`
+	mkfs.ext4 -q ${PART11} -L $RESERVED2 -F
+}
+
+function show_usage () {
+	echo "- Usage:"
+	echo "	sudo ./sd_fusing*.sh -d <device> [-b <path> <path> ..] [--format]"
+}
+
+function check_partition_format () {
+	if [ "$FORMAT" != "2" ]; then
+		echo "-----------------------"
+		echo "Skip $DEVICE format"
+		echo "-----------------------"
+		return 0
+	fi
+
+	echo "-------------------------------"
+	echo "Start $DEVICE format"
+	echo ""
+	mkpart_3
+	echo "End $DEVICE format"
+	echo "-------------------------------"
+	echo ""
+}
+
+function check_args () {
+	if [ "$DEVICE" == "" ]; then
+		echo "$(tput setaf 1)$(tput bold)- Device node is empty!"
+		show_usage
+		tput sgr 0
+		exit 0
+	fi
+
+	if [ "$DEVICE" != "" ]; then
+		echo "Device: $DEVICE"
+	fi
+
+	if [ "$FUSING_BINARY_NUM" != 0 ]; then
+		echo "Fusing binary: "
+		for ((bid = 0 ; bid < $FUSING_BINARY_NUM ; bid++))
+		do
+			echo "  ${FUSING_BINARY_ARRAY[bid]}"
+		done
+		echo ""
+	fi
+
+	if [ "$FORMAT" == "1" ]; then
+		echo ""
+		echo -n "$(tput setaf 3)$(tput bold)$DEVICE will be formatted, Is it OK? [y/<n>] "
+		tput sgr 0
+		read input
+		if [ "$input" == "y" ] || [ "$input" == "Y" ]; then
+			FORMAT=2
+		else
+			FORMAT=0
+		fi
+	fi
+}
+
+function check_device () {
+	if [ ! -b "$DEVICE" ]; then
+		echo "No such device: $DEVICE"
+		exit 0
+	fi
+
+	local REMOVABLE=`lsblk $DEVICE -nd -o RM | grep 1 | wc -l`
+	if [ "$REMOVABLE" == "0" ]; then
+		echo ""
+		echo "$(tput setaf 3)$(tput bold)$DEVICE is not a removable disk, Is it OK? [y/<n>]"
+		tput sgr 0
+		read input
+		if [ "$input" != "y" ] && [ "$input" != "Y" ]; then
+			exit 0
+		fi
+	fi
+
+	if [ ! -w "$DEVICE" ]; then
+		echo "Write not permitted: $DEVICE"
+		exit 0
+	fi
+}
+
+function print_logo () {
+	echo ""
+	echo "Raspberry Pi4 downloader, version 1.0.0"
+	echo ""
+}
+
+print_logo
+
+function add_fusing_binary() {
+	local declare binary_name=$1
+
+	if [ "$binary_name" != "" ]; then
+		if [ -f "$binary_name" ]; then
+			FUSING_BINARY_ARRAY[$FUSING_BINARY_NUM]=$binary_name
+
+			FUSING_BINARY_NUM=$((FUSING_BINARY_NUM + 1))
+		else
+			echo "No such file: $binary_name"
+		fi
+	fi
+}
+
+
+declare -i binary_option=0
+
+while test $# -ne 0; do
+	option=$1
+	shift
+
+	case $option in
+	--f | --format)
+		FORMAT="1"
+		binary_option=0
+		;;
+	-d)
+		DEVICE=$1
+		binary_option=0
+		shift
+		;;
+	-b)
+		add_fusing_binary $1
+		binary_option=1
+		shift
+		;;
+	*)
+		if [ $binary_option == 1 ];then
+			add_fusing_binary $option
+		else
+			echo "Unkown command: $option"
+			exit
+		fi
+		;;
+	esac
+done
+
+check_args
+check_device
+check_partition_format
+check_ddversion
+fuse_image