From: Alan Tull Date: Wed, 21 Feb 2018 20:25:41 +0000 (-0600) Subject: arm64: dts: stratix10: enable i2c, add i2c periperals X-Git-Tag: v5.15~8700^2~9^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=eebee19e52c850856e219e124fdf4de6bacef9ff;p=platform%2Fkernel%2Flinux-starfive.git arm64: dts: stratix10: enable i2c, add i2c periperals Add clock for i2c Enable i2c1 Set the i2c bus speed to 100KHz Add the following i2c peripherals * ds1339 RTC * 24c32 EEPROM * max1619 temperature monitor * ltc2497 ADC * Add a fixed regulator for the ADC's Vref. This requires Dinh Nguyen's Stratix10 clock driver ("clk: socfpga: stratix10: add clock driver for Stratix10 platform") Signed-off-by: Alan Tull Signed-off-by: Dinh Nguyen --- diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 0e267c8..21d906e 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -207,6 +207,7 @@ reg = <0xffc02800 0x100>; interrupts = <0 103 4>; resets = <&rst I2C0_RESET>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; status = "disabled"; }; @@ -217,6 +218,7 @@ reg = <0xffc02900 0x100>; interrupts = <0 104 4>; resets = <&rst I2C1_RESET>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; status = "disabled"; }; @@ -227,6 +229,7 @@ reg = <0xffc02a00 0x100>; interrupts = <0 105 4>; resets = <&rst I2C2_RESET>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; status = "disabled"; }; @@ -237,6 +240,7 @@ reg = <0xffc02b00 0x100>; interrupts = <0 106 4>; resets = <&rst I2C3_RESET>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; status = "disabled"; }; @@ -247,6 +251,7 @@ reg = <0xffc02c00 0x100>; interrupts = <0 107 4>; resets = <&rst I2C4_RESET>; + clocks = <&clkmgr STRATIX10_L4_SP_CLK>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index bec15e8..d03df18 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -51,6 +51,13 @@ reg = <0 0 0 0>; }; + ref_033v: 033-v-ref { + compatible = "regulator-fixed"; + regulator-name = "0.33V"; + regulator-min-microvolt = <330000>; + regulator-max-microvolt = <330000>; + }; + soc { clocks { osc1 { @@ -113,3 +120,30 @@ &watchdog0 { status = "okay"; }; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + + adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&ref_033v>; + }; + + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +};