From: Andrew Lunn Date: Tue, 2 Jan 2018 16:40:26 +0000 (+0100) Subject: net: mdio: Only perform gpio reset for PHYs X-Git-Tag: v4.19~1702^2~242 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ee7e16b66a766e8f922aafe5edf9353b9f37a424;p=platform%2Fkernel%2Flinux-rpi3.git net: mdio: Only perform gpio reset for PHYs Ethernet switch on the MDIO bus have historically performed their own handling of the GPIO reset line. The resent patch to have the MDIO core handle the reset has broken the switch drivers, in that they cannot claim the GPIO. Some switch drivers need more control over the GPIO line than what the MDIO core provides. So restore the historical behaviour by only performing a reset of PHYs, not switches. Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Reported-by: Sean Wang Signed-off-by: Andrew Lunn Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index e2419c7..88272b3 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -47,13 +47,10 @@ #include "mdio-boardinfo.h" -int mdiobus_register_device(struct mdio_device *mdiodev) +static int mdiobus_register_gpiod(struct mdio_device *mdiodev) { struct gpio_desc *gpiod = NULL; - if (mdiodev->bus->mdio_map[mdiodev->addr]) - return -EBUSY; - /* Deassert the optional reset signal */ if (mdiodev->dev.of_node) gpiod = fwnode_get_named_gpiod(&mdiodev->dev.of_node->fwnode, @@ -69,6 +66,22 @@ int mdiobus_register_device(struct mdio_device *mdiodev) /* Assert the reset signal again */ mdio_device_reset(mdiodev, 1); + return 0; +} + +int mdiobus_register_device(struct mdio_device *mdiodev) +{ + int err; + + if (mdiodev->bus->mdio_map[mdiodev->addr]) + return -EBUSY; + + if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) { + err = mdiobus_register_gpiod(mdiodev); + if (err) + return err; + } + mdiodev->bus->mdio_map[mdiodev->addr] = mdiodev; return 0;