From: Kamal Dasu Date: Fri, 8 Oct 2021 20:36:01 +0000 (-0400) Subject: spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode X-Git-Tag: v6.1-rc5~2406^2~20^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ee4d62c47326c69e57180da53c057e55f0e73e35;p=platform%2Fkernel%2Flinux-starfive.git spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode Adding 32-bits and 64-bits per transfer modes using the SPCR3 register settings provided in MSPI controller ver >= 1.5 Signed-off-by: Kamal Dasu Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20211008203603.40915-2-kdasu.kdev@gmail.com Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index 3043677..c7c467f 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -83,6 +83,9 @@ /* MSPI register offsets */ #define MSPI_SPCR0_LSB 0x000 #define MSPI_SPCR0_MSB 0x004 +#define MSPI_SPCR0_MSB_CPHA BIT(0) +#define MSPI_SPCR0_MSB_CPOL BIT(1) +#define MSPI_SPCR0_MSB_BITS_SHIFT 0x2 #define MSPI_SPCR1_LSB 0x008 #define MSPI_SPCR1_MSB 0x00c #define MSPI_NEWQP 0x010 @@ -102,6 +105,7 @@ #define MSPI_NUM_CDRAM 16 #define MSPI_CDRAM_CONT_BIT BIT(7) #define MSPI_CDRAM_BITSE_BIT BIT(6) +#define MSPI_CDRAM_DT_BIT BIT(5) #define MSPI_CDRAM_PCS 0xf #define MSPI_SPCR2_SPE BIT(6) @@ -114,6 +118,12 @@ ~(BIT(10) | BIT(11))) #define MSPI_SPCR3_SYSCLKSEL_108 (MSPI_SPCR3_SYSCLKSEL_MASK & \ BIT(11)) +#define MSPI_SPCR3_TXRXDAM_MASK GENMASK(4, 2) +#define MSPI_SPCR3_DAM_8BYTE 0 +#define MSPI_SPCR3_DAM_16BYTE (BIT(2) | BIT(4)) +#define MSPI_SPCR3_DAM_32BYTE (BIT(3) | BIT(5)) +#define MSPI_SPCR3_DATA_REG_SZ BIT(8) +#define MSPI_SPCR3_CPHARX BIT(9) #define MSPI_MSPI_STATUS_SPIF BIT(0) @@ -153,6 +163,14 @@ #define TRANS_STATUS_BREAK_DESELECT (TRANS_STATUS_BREAK_EOM | \ TRANS_STATUS_BREAK_CS_CHANGE) +/* + * Used for writing and reading data in the right order + * to TXRAM and RXRAM when used as 32-bit registers respectively + */ +#define swap4bytes(__val) \ + ((((__val) >> 24) & 0x000000FF) | (((__val) >> 8) & 0x0000FF00) | \ + (((__val) << 8) & 0x00FF0000) | (((__val) << 24) & 0xFF000000)) + struct bcm_qspi_parms { u32 speed_hz; u8 mode; @@ -261,7 +279,7 @@ static inline bool bcm_qspi_has_sysclk_108(struct bcm_qspi *qspi) static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi) { if (bcm_qspi_has_fastbr(qspi)) - return 1; + return (bcm_qspi_has_sysclk_108(qspi) ? 4 : 1); else return 8; } @@ -570,23 +588,23 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi, { u32 spcr, spbr = 0; - if (xp->speed_hz) - spbr = qspi->base_clk / (2 * xp->speed_hz); - - spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX); - bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr); - if (!qspi->mspi_maj_rev) /* legacy controller */ spcr = MSPI_MASTER_BIT; else spcr = 0; - /* for 16 bit the data should be zero */ - if (xp->bits_per_word != 16) - spcr |= xp->bits_per_word << 2; - spcr |= xp->mode & 3; + /* + * Bits per transfer. BITS determines the number of data bits + * transferred if the command control bit (BITSE of a + * CDRAM Register) is equal to 1. + * If CDRAM BITSE is equal to 0, 8 data bits are transferred + * regardless + */ + if (xp->bits_per_word != 16 && xp->bits_per_word != 64) + spcr |= xp->bits_per_word << MSPI_SPCR0_MSB_BITS_SHIFT; + spcr |= xp->mode & (MSPI_SPCR0_MSB_CPHA | MSPI_SPCR0_MSB_CPOL); bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr); if (bcm_qspi_has_fastbr(qspi)) { @@ -599,13 +617,37 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi, /* SYSCLK_108 */ spcr |= MSPI_SPCR3_SYSCLKSEL_108; qspi->base_clk = MSPI_BASE_FREQ * 4; - /* Change spbr as we changed sysclk */ - bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, 4); } + if (xp->bits_per_word > 16) { + /* data_reg_size 1 (64bit) */ + spcr |= MSPI_SPCR3_DATA_REG_SZ; + /* TxRx RAM data access mode 2 for 32B and set fastdt */ + spcr |= MSPI_SPCR3_DAM_32BYTE | MSPI_SPCR3_FASTDT; + /* + * Set length of delay after transfer + * DTL from 0(256) to 1 + */ + bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_LSB, 1); + } else { + /* data_reg_size[8] = 0 */ + spcr &= ~(MSPI_SPCR3_DATA_REG_SZ); + + /* + * TxRx RAM access mode 8B + * and disable fastdt + */ + spcr &= ~(MSPI_SPCR3_DAM_32BYTE); + } bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr); } + if (xp->speed_hz) + spbr = qspi->base_clk / (2 * xp->speed_hz); + + spbr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX); + bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spbr); + qspi->last_parms = *xp; } @@ -626,7 +668,7 @@ static int bcm_qspi_setup(struct spi_device *spi) { struct bcm_qspi_parms *xp; - if (spi->bits_per_word > 16) + if (spi->bits_per_word > 64) return -EINVAL; xp = spi_get_ctldata(spi); @@ -665,8 +707,12 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi, /* count the last transferred bytes */ if (qt->trans->bits_per_word <= 8) qt->byte++; - else + else if (qt->trans->bits_per_word <= 16) qt->byte += 2; + else if (qt->trans->bits_per_word <= 32) + qt->byte += 4; + else if (qt->trans->bits_per_word <= 64) + qt->byte += 8; if (qt->byte >= qt->trans->len) { /* we're at the end of the spi_transfer */ @@ -709,6 +755,33 @@ static inline u16 read_rxram_slot_u16(struct bcm_qspi *qspi, int slot) ((bcm_qspi_read(qspi, MSPI, msb_offset) & 0xff) << 8); } +static inline u32 read_rxram_slot_u32(struct bcm_qspi *qspi, int slot) +{ + u32 reg_offset = MSPI_RXRAM; + u32 offset = reg_offset + (slot << 3); + u32 val; + + val = bcm_qspi_read(qspi, MSPI, offset); + val = swap4bytes(val); + + return val; +} + +static inline u64 read_rxram_slot_u64(struct bcm_qspi *qspi, int slot) +{ + u32 reg_offset = MSPI_RXRAM; + u32 lsb_offset = reg_offset + (slot << 3) + 0x4; + u32 msb_offset = reg_offset + (slot << 3); + u32 msb, lsb; + + msb = bcm_qspi_read(qspi, MSPI, msb_offset); + msb = swap4bytes(msb); + lsb = bcm_qspi_read(qspi, MSPI, lsb_offset); + lsb = swap4bytes(lsb); + + return ((u64)msb << 32 | lsb); +} + static void read_from_hw(struct bcm_qspi *qspi, int slots) { struct qspi_trans tp; @@ -732,7 +805,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots) buf[tp.byte] = read_rxram_slot_u8(qspi, slot); dev_dbg(&qspi->pdev->dev, "RD %02x\n", buf ? buf[tp.byte] : 0x0); - } else { + } else if (tp.trans->bits_per_word <= 16) { u16 *buf = tp.trans->rx_buf; if (buf) @@ -740,6 +813,25 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots) slot); dev_dbg(&qspi->pdev->dev, "RD %04x\n", buf ? buf[tp.byte / 2] : 0x0); + } else if (tp.trans->bits_per_word <= 32) { + u32 *buf = tp.trans->rx_buf; + + if (buf) + buf[tp.byte / 4] = read_rxram_slot_u32(qspi, + slot); + dev_dbg(&qspi->pdev->dev, "RD %08x\n", + buf ? buf[tp.byte / 4] : 0x0); + + } else if (tp.trans->bits_per_word <= 64) { + u64 *buf = tp.trans->rx_buf; + + if (buf) + buf[tp.byte / 8] = read_rxram_slot_u64(qspi, + slot); + dev_dbg(&qspi->pdev->dev, "RD %llx\n", + buf ? buf[tp.byte / 8] : 0x0); + + } update_qspi_trans_byte_count(qspi, &tp, @@ -769,6 +861,28 @@ static inline void write_txram_slot_u16(struct bcm_qspi *qspi, int slot, bcm_qspi_write(qspi, MSPI, lsb_offset, (val & 0xff)); } +static inline void write_txram_slot_u32(struct bcm_qspi *qspi, int slot, + u32 val) +{ + u32 reg_offset = MSPI_TXRAM; + u32 msb_offset = reg_offset + (slot << 3); + + bcm_qspi_write(qspi, MSPI, msb_offset, swap4bytes(val)); +} + +static inline void write_txram_slot_u64(struct bcm_qspi *qspi, int slot, + u64 val) +{ + u32 reg_offset = MSPI_TXRAM; + u32 msb_offset = reg_offset + (slot << 3); + u32 lsb_offset = reg_offset + (slot << 3) + 0x4; + u32 msb = upper_32_bits(val); + u32 lsb = lower_32_bits(val); + + bcm_qspi_write(qspi, MSPI, msb_offset, swap4bytes(msb)); + bcm_qspi_write(qspi, MSPI, lsb_offset, swap4bytes(lsb)); +} + static inline u32 read_cdram_slot(struct bcm_qspi *qspi, int slot) { return bcm_qspi_read(qspi, MSPI, MSPI_CDRAM + (slot << 2)); @@ -792,20 +906,39 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi) /* Run until end of transfer or reached the max data */ while (!tstatus && slot < MSPI_NUM_CDRAM) { + mspi_cdram = MSPI_CDRAM_CONT_BIT; if (tp.trans->bits_per_word <= 8) { const u8 *buf = tp.trans->tx_buf; u8 val = buf ? buf[tp.byte] : 0x00; write_txram_slot_u8(qspi, slot, val); dev_dbg(&qspi->pdev->dev, "WR %02x\n", val); - } else { + } else if (tp.trans->bits_per_word <= 16) { const u16 *buf = tp.trans->tx_buf; u16 val = buf ? buf[tp.byte / 2] : 0x0000; write_txram_slot_u16(qspi, slot, val); dev_dbg(&qspi->pdev->dev, "WR %04x\n", val); + } else if (tp.trans->bits_per_word <= 32) { + const u32 *buf = tp.trans->tx_buf; + u32 val = buf ? buf[tp.byte/4] : 0x0; + + write_txram_slot_u32(qspi, slot, val); + dev_dbg(&qspi->pdev->dev, "WR %08x\n", val); + } else if (tp.trans->bits_per_word <= 64) { + const u64 *buf = tp.trans->tx_buf; + u64 val = (buf ? buf[tp.byte/8] : 0x0); + + /* use the length of delay from SPCR1_LSB */ + if (bcm_qspi_has_fastbr(qspi)) + mspi_cdram |= MSPI_CDRAM_DT_BIT; + + write_txram_slot_u64(qspi, slot, val); + dev_dbg(&qspi->pdev->dev, "WR %llx\n", val); } - mspi_cdram = MSPI_CDRAM_CONT_BIT; + + mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 : + MSPI_CDRAM_BITSE_BIT); if (has_bspi(qspi)) mspi_cdram &= ~1; @@ -813,9 +946,6 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi) mspi_cdram |= (~(1 << spi->chip_select) & MSPI_CDRAM_PCS); - mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 : - MSPI_CDRAM_BITSE_BIT); - write_cdram_slot(qspi, slot, mspi_cdram); tstatus = update_qspi_trans_byte_count(qspi, &tp,