From: Sri Deevi Date: Fri, 13 Mar 2009 21:35:14 +0000 (-0300) Subject: V4L/DVB (11038): Fix the issue with audio module & correction of Names X-Git-Tag: upstream/snapshot3+hdmi~19399^2~81 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ed559edf35bdefb91c7eba5ea3dfd1e939aaa782;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git V4L/DVB (11038): Fix the issue with audio module & correction of Names The audio module requested in driver differs with module created by Makefile. Makefile is corrected to create the same module name required by driver. Also, corrected the strings that shows wrong name. Signed-off-by: Srinivasa Deevi Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/video/cx231xx/Makefile index 1dad936..755dd0c 100644 --- a/drivers/media/video/cx231xx/Makefile +++ b/drivers/media/video/cx231xx/Makefile @@ -1,8 +1,10 @@ cx231xx-objs := cx231xx-video.o cx231xx-i2c.o cx231xx-cards.o cx231xx-core.o \ cx231xx-avcore.o cx231xx-pcb-cfg.o cx231xx-vbi.o +cx231xx-alsa-objs := cx231xx-audio.o + obj-$(CONFIG_VIDEO_CX231XX) += cx231xx.o -obj-$(CONFIG_VIDEO_CX231XX_ALSA) += cx231xx-audio.o +obj-$(CONFIG_VIDEO_CX231XX_ALSA) += cx231xx-alsa.o obj-$(CONFIG_VIDEO_CX231XX_DVB) += cx231xx-dvb.o EXTRA_CFLAGS += -Idrivers/media/video diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index c5230b5d..6a67c2d 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -168,11 +168,11 @@ const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards); /* table of devices that work with this driver */ struct usb_device_id cx231xx_id_table[] = { - {USB_DEVICE(0x0572, 0x58A0), + {USB_DEVICE(0x0572, 0x5A3C), .driver_info = CX231XX_BOARD_UNKNOWN}, {USB_DEVICE(0x0572, 0x58A2), .driver_info = CX231XX_BOARD_CNXT_RDE_250}, - {USB_DEVICE(0x0572, 0x5A3C), + {USB_DEVICE(0x0572, 0x58A1), .driver_info = CX231XX_BOARD_CNXT_RDU_250}, {}, }; @@ -321,11 +321,11 @@ void cx231xx_card_setup(struct cx231xx *dev) switch (dev->model) { case CX231XX_BOARD_CNXT_RDE_250: /* do card specific GPIO settings if required */ - cx231xx_info("Board is Conexnat RDE 250\n"); + cx231xx_info("Board is Conexant RDE 250\n"); break; case CX231XX_BOARD_CNXT_RDU_250: /* do card specific GPIO settings if required */ - cx231xx_info("Board is Conexnat RDU 250\n"); + cx231xx_info("Board is Conexant RDU 250\n"); break; }