From: Koen Kooi <koen@dominion.thruhere.net>
Date: Thu, 12 Sep 2013 18:35:35 +0000 (+0200)
Subject: ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers
X-Git-Tag: v3.13-rc1~156^2~6^2~3^2~30
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ec8a75979f199fd6fdcf24f8d1c928a48c61483e;p=platform%2Fkernel%2Flinux-exynos.git

ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers

This matches the vendor 3.8.x configuration that is shipping
with the boards.

The LED layout is now:
 USR0: heartbeat
 USR1: mmc0 (micro-SD slot)
 USR2: cpu0
 USR3: mmc1 (eMMC)

The cpu0 triggers was put in between the mmc triggers to make
is easier to see where the disk activity is.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Tested-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index fbb11dd..56361ce 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -204,12 +204,14 @@
 		led@4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
 		led@5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 	};