From: Florian Fainelli Date: Thu, 27 Mar 2014 04:18:39 +0000 (-0700) Subject: net: bcmgenet: set RBUF_SKIP_FCS based on UniMAC CRC forwarding X-Git-Tag: v3.15-rc1~113^2~56 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ebe5e3c64241bbdc256e9828392fa452bc2bfd7e;p=platform%2Fkernel%2Flinux-exynos.git net: bcmgenet: set RBUF_SKIP_FCS based on UniMAC CRC forwarding When the UniMAC block is configured to forward the CRC as part of the Ethernet frame (priv->crc_fwd_en, set by default), enabling the hardware RX checksum block unveiled that the dma_rxchk_bit was never set in the per-packet status bits (dma_flag in bcmgenet_desc_rx). This would make the chksum_ok variable to be never set to 1, and the networking stack would have to compute the packet checksums, which takes a substantial amount of time. In order for the RXCHK block to properly compute the packet checksum in hardware, we also need to set the RBUF_SKIP_FCS bit accordingly. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 8f87fe0..adf8acb 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -416,6 +416,15 @@ static int bcmgenet_set_rx_csum(struct net_device *dev, else rbuf_chk_ctrl &= ~RBUF_RXCHK_EN; priv->desc_rxchk_en = rx_csum_en; + + /* If UniMAC forwards CRC, we need to skip over it to get + * a valid CHK bit to be set in the per-packet status word + */ + if (rx_csum_en && priv->crc_fwd_en) + rbuf_chk_ctrl |= RBUF_SKIP_FCS; + else + rbuf_chk_ctrl &= ~RBUF_SKIP_FCS; + bcmgenet_rbuf_writel(priv, rbuf_chk_ctrl, RBUF_CHK_CTRL); return 0;