From: Stephan Gerhold Date: Wed, 26 May 2021 09:44:08 +0000 (+0200) Subject: iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth X-Git-Tag: v5.15~790^2~180^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=eb4e91f42fc9140b7e373675e03a21a7eaec68e3;p=platform%2Fkernel%2Flinux-starfive.git iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth According to the BMA253 datasheet [1] and BMA250 datasheet [2] BMA25x also supports a bandwidth of 500 Hz and 1000 Hz but this was not listed in the driver for some reason. Add it to the bw_table to make the driver match the datasheet. [1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf [2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf Cc: Peter Meerwald Signed-off-by: Stephan Gerhold Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20210526094408.34298-3-stephan@gerhold.net Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index 97e9915..4a07e60 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -182,7 +182,7 @@ static int bma023_scale_table[] = { 2452, 4903, 9709, }; static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */ static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 }; -static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */ +static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250, 500, 1000 }; /* Hz */ static int bma25x_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0, 0, 0, 306458 };