From: Johan Meiring Date: Tue, 20 Nov 2012 17:28:46 +0000 (+0200) Subject: staging: cxt1e1: musycc.c: uses tabs for indentation X-Git-Tag: v3.8-rc1~178^2~232 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ea9d1e960ca2158794425738c6258afe60879a64;p=platform%2Fupstream%2Fkernel-adaptation-pc.git staging: cxt1e1: musycc.c: uses tabs for indentation This commit converts several instances of space usage for indentation to tabs. Signed-off-by: Johan Meiring Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/cxt1e1/musycc.c b/drivers/staging/cxt1e1/musycc.c index ba721c6..5feac8a 100644 --- a/drivers/staging/cxt1e1/musycc.c +++ b/drivers/staging/cxt1e1/musycc.c @@ -55,7 +55,7 @@ extern int cxt1e1_max_mtu; extern int max_rxdesc_used; extern int max_txdesc_used; extern ci_t *CI; /* dummy pointr to board ZEROE's data - DEBUG - * USAGE */ + * USAGE */ /*******************************************************************/ @@ -84,62 +84,62 @@ musycc_dump_rxbuffer_ring (mch_t * ch, int lockit) if (lockit) { - spin_lock_irqsave (&ch->ch_rxlock, flags); + spin_lock_irqsave (&ch->ch_rxlock, flags); } if (ch->rxd_num == 0) { - pr_info(" ZERO receive buffers allocated for this channel."); + pr_info(" ZERO receive buffers allocated for this channel."); } else { - FLUSH_MEM_READ (); - m = &ch->mdr[ch->rxix_irq_srv]; - for (n = ch->rxd_num; n; n--) - { - status = le32_to_cpu (m->status); - { - pr_info("%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n", - (m == &ch->mdr[ch->rxix_irq_srv]) ? 'F' : ' ', - (unsigned long) m, n, - status, - m->data ? (status & HOST_RX_OWNED ? 'H' : 'M') : '-', - status & POLL_DISABLED ? 'P' : '-', - status & EOBIRQ_ENABLE ? 'b' : '-', - status & EOMIRQ_ENABLE ? 'm' : '-', - status & LENGTH_MASK, - le32_to_cpu (m->data), le32_to_cpu (m->next)); + FLUSH_MEM_READ (); + m = &ch->mdr[ch->rxix_irq_srv]; + for (n = ch->rxd_num; n; n--) + { + status = le32_to_cpu (m->status); + { + pr_info("%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n", + (m == &ch->mdr[ch->rxix_irq_srv]) ? 'F' : ' ', + (unsigned long) m, n, + status, + m->data ? (status & HOST_RX_OWNED ? 'H' : 'M') : '-', + status & POLL_DISABLED ? 'P' : '-', + status & EOBIRQ_ENABLE ? 'b' : '-', + status & EOMIRQ_ENABLE ? 'm' : '-', + status & LENGTH_MASK, + le32_to_cpu (m->data), le32_to_cpu (m->next)); #ifdef RLD_DUMP_BUFDATA - { - u_int32_t *dp; - int len = status & LENGTH_MASK; + { + u_int32_t *dp; + int len = status & LENGTH_MASK; #if 1 - if (m->data && (status & HOST_RX_OWNED)) + if (m->data && (status & HOST_RX_OWNED)) #else - if (m->data) /* always dump regardless of valid RX - * data */ + if (m->data) /* always dump regardless of valid RX + * data */ #endif - { - dp = (u_int32_t *) OS_phystov ((void *) (le32_to_cpu (m->data))); - if (len >= 0x10) - pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len, - *dp, *(dp + 1), *(dp + 2), *(dp + 3)); - else if (len >= 0x08) - pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len, - *dp, *(dp + 1)); - else - pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp); - } - } + { + dp = (u_int32_t *) OS_phystov ((void *) (le32_to_cpu (m->data))); + if (len >= 0x10) + pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len, + *dp, *(dp + 1), *(dp + 2), *(dp + 3)); + else if (len >= 0x08) + pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len, + *dp, *(dp + 1)); + else + pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp); + } + } #endif - } - m = m->snext; - } + } + m = m->snext; + } } /* -for- */ pr_info("\n"); if (lockit) { - spin_unlock_irqrestore (&ch->ch_rxlock, flags); + spin_unlock_irqrestore (&ch->ch_rxlock, flags); } return 0; } @@ -156,58 +156,58 @@ musycc_dump_txbuffer_ring (mch_t * ch, int lockit) if (lockit) { - spin_lock_irqsave (&ch->ch_txlock, flags); + spin_lock_irqsave (&ch->ch_txlock, flags); } if (ch->txd_num == 0) { - pr_info(" ZERO transmit buffers allocated for this channel."); + pr_info(" ZERO transmit buffers allocated for this channel."); } else { - FLUSH_MEM_READ (); - m = ch->txd_irq_srv; - for (n = ch->txd_num; n; n--) - { - status = le32_to_cpu (m->status); - { - pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n", - (m == ch->txd_usr_add) ? 'F' : ' ', - (m == ch->txd_irq_srv) ? 'L' : ' ', - (unsigned long) m, n, - status, - m->data ? (status & MUSYCC_TX_OWNED ? 'M' : 'H') : '-', - status & POLL_DISABLED ? 'P' : '-', - status & EOBIRQ_ENABLE ? 'b' : '-', - status & EOMIRQ_ENABLE ? 'm' : '-', - status & LENGTH_MASK, - le32_to_cpu (m->data), le32_to_cpu (m->next)); + FLUSH_MEM_READ (); + m = ch->txd_irq_srv; + for (n = ch->txd_num; n; n--) + { + status = le32_to_cpu (m->status); + { + pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n", + (m == ch->txd_usr_add) ? 'F' : ' ', + (m == ch->txd_irq_srv) ? 'L' : ' ', + (unsigned long) m, n, + status, + m->data ? (status & MUSYCC_TX_OWNED ? 'M' : 'H') : '-', + status & POLL_DISABLED ? 'P' : '-', + status & EOBIRQ_ENABLE ? 'b' : '-', + status & EOMIRQ_ENABLE ? 'm' : '-', + status & LENGTH_MASK, + le32_to_cpu (m->data), le32_to_cpu (m->next)); #ifdef RLD_DUMP_BUFDATA - { - u_int32_t *dp; - int len = status & LENGTH_MASK; - - if (m->data) - { - dp = (u_int32_t *) OS_phystov ((void *) (le32_to_cpu (m->data))); - if (len >= 0x10) - pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len, - *dp, *(dp + 1), *(dp + 2), *(dp + 3)); - else if (len >= 0x08) - pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len, - *dp, *(dp + 1)); - else - pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp); - } - } + { + u_int32_t *dp; + int len = status & LENGTH_MASK; + + if (m->data) + { + dp = (u_int32_t *) OS_phystov ((void *) (le32_to_cpu (m->data))); + if (len >= 0x10) + pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len, + *dp, *(dp + 1), *(dp + 2), *(dp + 3)); + else if (len >= 0x08) + pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len, + *dp, *(dp + 1)); + else + pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp); + } + } #endif - } - m = m->snext; - } + } + m = m->snext; + } } /* -for- */ pr_info("\n"); if (lockit) { - spin_unlock_irqrestore (&ch->ch_txlock, flags); + spin_unlock_irqrestore (&ch->ch_txlock, flags); } return 0; } @@ -226,39 +226,39 @@ musycc_dump_ring (ci_t * ci, unsigned int chan) if (chan >= MAX_CHANS_USED) { - return SBE_DRVR_FAIL; /* E2BIG */ + return SBE_DRVR_FAIL; /* E2BIG */ } { - int bh; - - bh = atomic_read (&ci->bh_pending); - pr_info(">> bh_pend %d [%d] ihead %d itail %d [%d] th_cnt %d bh_cnt %d wdcnt %d note %d\n", - bh, max_bh, ci->iqp_headx, ci->iqp_tailx, max_intcnt, - ci->intlog.drvr_intr_thcount, - ci->intlog.drvr_intr_bhcount, - ci->wdcount, ci->wd_notify); - max_bh = 0; /* reset counter */ - max_intcnt = 0; /* reset counter */ + int bh; + + bh = atomic_read (&ci->bh_pending); + pr_info(">> bh_pend %d [%d] ihead %d itail %d [%d] th_cnt %d bh_cnt %d wdcnt %d note %d\n", + bh, max_bh, ci->iqp_headx, ci->iqp_tailx, max_intcnt, + ci->intlog.drvr_intr_thcount, + ci->intlog.drvr_intr_bhcount, + ci->wdcount, ci->wd_notify); + max_bh = 0; /* reset counter */ + max_intcnt = 0; /* reset counter */ } if (!(ch = sd_find_chan (dummy, chan))) { - pr_info(">> musycc_dump_ring: channel %d not up.\n", chan); - return ENOENT; + pr_info(">> musycc_dump_ring: channel %d not up.\n", chan); + return ENOENT; } pr_info(">> CI %p CHANNEL %3d @ %p: state %x status/p %x/%x\n", ci, chan, ch, ch->state, - ch->status, ch->p.status); + ch->status, ch->p.status); pr_info("--------------------------------\nTX Buffer Ring - Channel %d, txd_num %d. (bd/ch pend %d %d), TXD required %d, txpkt %lu\n", - chan, ch->txd_num, - (u_int32_t) atomic_read (&ci->tx_pending), (u_int32_t) atomic_read (&ch->tx_pending), ch->txd_required, ch->s.tx_packets); + chan, ch->txd_num, + (u_int32_t) atomic_read (&ci->tx_pending), (u_int32_t) atomic_read (&ch->tx_pending), ch->txd_required, ch->s.tx_packets); pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n", - ch->user, ch->txd_irq_srv, ch->txd_usr_add, - sd_queue_stopped (ch->user), - ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode); + ch->user, ch->txd_irq_srv, ch->txd_usr_add, + sd_queue_stopped (ch->user), + ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode); musycc_dump_txbuffer_ring (ch, 1); pr_info("RX Buffer Ring - Channel %d, rxd_num %d. IRQ_SRV[%d] 0x%p, start_rx %x rxpkt %lu\n", - chan, ch->rxd_num, ch->rxix_irq_srv, - &ch->mdr[ch->rxix_irq_srv], ch->ch_start_rx, ch->s.rx_packets); + chan, ch->rxd_num, ch->rxix_irq_srv, + &ch->mdr[ch->rxix_irq_srv], ch->ch_start_rx, ch->s.rx_packets); musycc_dump_rxbuffer_ring (ch, 1); return SBE_DRVR_SUCCESS; @@ -271,7 +271,7 @@ musycc_dump_rings (ci_t * ci, unsigned int start_chan) unsigned int chan; for (chan = start_chan; chan < (start_chan + 5); chan++) - musycc_dump_ring (ci, chan); + musycc_dump_ring (ci, chan); return SBE_DRVR_SUCCESS; } @@ -300,7 +300,7 @@ musycc_init_mdt (mpi_t * pi) for (i = 0; i < 32; addr++, i++) { - pci_write_32 (addr, cfg); + pci_write_32 (addr, cfg); } } @@ -316,26 +316,26 @@ musycc_update_tx_thp (mch_t * ch) spin_lock_irqsave (&ch->ch_txlock, flags); while (1) { - md = ch->txd_irq_srv; - FLUSH_MEM_READ (); - if (!md->data) - { - /* No MDs with buffers to process */ - spin_unlock_irqrestore (&ch->ch_txlock, flags); - return; - } - if ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED) - { - /* this is the MD to restart TX with */ - break; - } - /* - * Otherwise, we have a valid, host-owned message descriptor which - * has been successfully transmitted and whose buffer can be freed, - * so... process this MD, it's owned by the host. (This might give - * as a new, updated txd_irq_srv.) - */ - musycc_bh_tx_eom (ch->up, ch->gchan); + md = ch->txd_irq_srv; + FLUSH_MEM_READ (); + if (!md->data) + { + /* No MDs with buffers to process */ + spin_unlock_irqrestore (&ch->ch_txlock, flags); + return; + } + if ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED) + { + /* this is the MD to restart TX with */ + break; + } + /* + * Otherwise, we have a valid, host-owned message descriptor which + * has been successfully transmitted and whose buffer can be freed, + * so... process this MD, it's owned by the host. (This might give + * as a new, updated txd_irq_srv.) + */ + musycc_bh_tx_eom (ch->up, ch->gchan); } md = ch->txd_irq_srv; ch->up->regram->thp[ch->gchan] = cpu_to_le32 (OS_vtophys (md)); @@ -343,10 +343,10 @@ musycc_update_tx_thp (mch_t * ch) if (ch->tx_full) { - ch->tx_full = 0; - ch->txd_required = 0; - sd_enable_xmit (ch->user); /* re-enable to catch flow controlled - * channel */ + ch->tx_full = 0; + ch->txd_required = 0; + sd_enable_xmit (ch->user); /* re-enable to catch flow controlled + * channel */ } spin_unlock_irqrestore (&ch->ch_txlock, flags); @@ -380,7 +380,7 @@ musycc_wq_chan_restart (void *arg) /* channel private structure */ #ifdef RLD_TRANS_DEBUG pr_info("wq_chan_restart[%d]: start_RT[%d/%d] status %x\n", - ch->channum, ch->ch_start_rx, ch->ch_start_tx, ch->status); + ch->channum, ch->ch_start_rx, ch->ch_start_tx, ch->status); #endif @@ -391,30 +391,30 @@ musycc_wq_chan_restart (void *arg) /* channel private structure */ if ((ch->ch_start_rx) && (ch->status & RX_ENABLED)) { - ch->ch_start_rx = 0; + ch->ch_start_rx = 0; #if defined(RLD_TRANS_DEBUG) || defined(RLD_RXACT_DEBUG) - { - static int hereb4 = 7; + { + static int hereb4 = 7; - if (hereb4) /* RLD DEBUG */ - { - hereb4--; + if (hereb4) /* RLD DEBUG */ + { + hereb4--; #ifdef RLD_TRANS_DEBUG - md = &ch->mdr[ch->rxix_irq_srv]; - pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n", - ch->channum, ch->rxix_irq_srv, md, le32_to_cpu (md->status), - ch->s.rx_packets); + md = &ch->mdr[ch->rxix_irq_srv]; + pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n", + ch->channum, ch->rxix_irq_srv, md, le32_to_cpu (md->status), + ch->s.rx_packets); #elif defined(RLD_RXACT_DEBUG) - md = &ch->mdr[ch->rxix_irq_srv]; - pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n", - ch->channum, ch->rxix_irq_srv, md, le32_to_cpu (md->status), - ch->s.rx_packets); - musycc_dump_rxbuffer_ring (ch, 1); /* RLD DEBUG */ + md = &ch->mdr[ch->rxix_irq_srv]; + pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n", + ch->channum, ch->rxix_irq_srv, md, le32_to_cpu (md->status), + ch->s.rx_packets); + musycc_dump_rxbuffer_ring (ch, 1); /* RLD DEBUG */ #endif - } - } + } + } #endif - musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | ch->gchan); + musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | ch->gchan); } /**********************************/ /** check for TX restart request **/ @@ -422,46 +422,46 @@ musycc_wq_chan_restart (void *arg) /* channel private structure */ if ((ch->ch_start_tx) && (ch->status & TX_ENABLED)) { - /* find next unprocessed message, then set TX thp to it */ - musycc_update_tx_thp (ch); + /* find next unprocessed message, then set TX thp to it */ + musycc_update_tx_thp (ch); #if 0 - spin_lock_irqsave (&ch->ch_txlock, flags); + spin_lock_irqsave (&ch->ch_txlock, flags); #endif - md = ch->txd_irq_srv; - if (!md) - { + md = ch->txd_irq_srv; + if (!md) + { #ifdef RLD_TRANS_DEBUG - pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum); + pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum); #endif #if 0 - spin_unlock_irqrestore (&ch->ch_txlock, flags); + spin_unlock_irqrestore (&ch->ch_txlock, flags); #endif - } else if (md->data && ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED)) - { - ch->ch_start_tx = 0; + } else if (md->data && ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED)) + { + ch->ch_start_tx = 0; #if 0 - spin_unlock_irqrestore (&ch->ch_txlock, flags); /* allow interrupts for service request */ + spin_unlock_irqrestore (&ch->ch_txlock, flags); /* allow interrupts for service request */ #endif #ifdef RLD_TRANS_DEBUG - pr_info("++ musycc_wq_chan_restart() CHAN TX ACTIVATE: chan %d txd_irq_srv %p = sts %x, txpkt %lu\n", - ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status, ch->s.tx_packets); + pr_info("++ musycc_wq_chan_restart() CHAN TX ACTIVATE: chan %d txd_irq_srv %p = sts %x, txpkt %lu\n", + ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status, ch->s.tx_packets); #endif - musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan); - } + musycc_serv_req (pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan); + } #ifdef RLD_RESTART_DEBUG - else - { - /* retain request to start until retried and we have data to xmit */ - pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n", - ch->channum, md, - le32_to_cpu (md->status), - le32_to_cpu (md->data), ch->ch_start_tx); - musycc_dump_txbuffer_ring (ch, 0); + else + { + /* retain request to start until retried and we have data to xmit */ + pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n", + ch->channum, md, + le32_to_cpu (md->status), + le32_to_cpu (md->data), ch->ch_start_tx); + musycc_dump_txbuffer_ring (ch, 0); #if 0 - spin_unlock_irqrestore (&ch->ch_txlock, flags); /* allow interrupts for service request */ + spin_unlock_irqrestore (&ch->ch_txlock, flags); /* allow interrupts for service request */ #endif - } + } #endif } } @@ -477,7 +477,7 @@ musycc_chan_restart (mch_t * ch) { #ifdef RLD_RESTART_DEBUG pr_info("++ musycc_chan_restart[%d]: txd_irq_srv @ %p = sts %x\n", - ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status); + ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status); #endif /* 2.6 - find next unprocessed message, then set TX thp to it */ @@ -485,7 +485,7 @@ musycc_chan_restart (mch_t * ch) pr_info(">> musycc_chan_restart: scheduling Chan %x workQ @ %p\n", ch->channum, &ch->ch_work); #endif c4_wk_chan_restart (ch); /* work queue mechanism fires off: Ref: - * musycc_wq_chan_restart () */ + * musycc_wq_chan_restart () */ } @@ -496,9 +496,9 @@ rld_put_led (mpi_t * pi, u_int32_t ledval) static u_int32_t led = 0; if (ledval == 0) - led = 0; + led = 0; else - led |= ledval; + led |= ledval; pci_write_32 ((u_int32_t *) &pi->up->cpldbase->leds, led); /* RLD DEBUG TRANHANG */ } @@ -521,42 +521,42 @@ musycc_serv_req (mpi_t * pi, u_int32_t req) */ SD_SEM_TAKE (&pi->sr_sem_busy, "serv"); /* only 1 thru here, per - * group */ + * group */ if (pi->sr_last == req) { #ifdef RLD_TRANS_DEBUG - pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req); + pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req); #endif - /* - * The most likely repeated request is the channel activation command - * which follows the occurrence of a Transparent mode TX ONR or a - * BUFF error. If the previous command was a CHANNEL ACTIVATE, - * precede it with a NOOP command in order maintain coherent control - * of this current (re)ACTIVATE. - */ - - r = (pi->sr_last & ~SR_GCHANNEL_MASK); - if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) || - (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION))) - { + /* + * The most likely repeated request is the channel activation command + * which follows the occurrence of a Transparent mode TX ONR or a + * BUFF error. If the previous command was a CHANNEL ACTIVATE, + * precede it with a NOOP command in order maintain coherent control + * of this current (re)ACTIVATE. + */ + + r = (pi->sr_last & ~SR_GCHANNEL_MASK); + if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) || + (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION))) + { #ifdef RLD_TRANS_DEBUG - pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req); + pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req); #endif - SD_SEM_GIVE (&pi->sr_sem_busy); /* allow this next request */ - musycc_serv_req (pi, SR_NOOP); - SD_SEM_TAKE (&pi->sr_sem_busy, "serv"); /* relock & continue w/ - * original req */ - } else if (req == SR_NOOP) - { - /* no need to issue back-to-back SR_NOOP commands at this time */ + SD_SEM_GIVE (&pi->sr_sem_busy); /* allow this next request */ + musycc_serv_req (pi, SR_NOOP); + SD_SEM_TAKE (&pi->sr_sem_busy, "serv"); /* relock & continue w/ + * original req */ + } else if (req == SR_NOOP) + { + /* no need to issue back-to-back SR_NOOP commands at this time */ #ifdef RLD_TRANS_DEBUG - pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum); + pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum); #endif - SD_SEM_GIVE (&pi->sr_sem_busy); /* allow this next request */ - return; - } + SD_SEM_GIVE (&pi->sr_sem_busy); /* allow this next request */ + return; + } } rcnt = 0; pi->sr_last = req; @@ -573,41 +573,41 @@ rewrite: * the same address." */ r = pci_read_32 ((u_int32_t *) &pi->reg->srd); /* adhere to write - * timing imposition */ + * timing imposition */ if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT)) { - if (cxt1e1_log_level >= LOG_MONITOR) - pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n", - pi->up->devname, rcnt, req, pi->sr_last, r, - (pi->portnum * MUSYCC_NCHANS) + (req & 0x1f)); - OS_uwait_dummy (); /* this delay helps reduce reissue counts - * (reason not yet researched) */ - goto rewrite; + if (cxt1e1_log_level >= LOG_MONITOR) + pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n", + pi->up->devname, rcnt, req, pi->sr_last, r, + (pi->portnum * MUSYCC_NCHANS) + (req & 0x1f)); + OS_uwait_dummy (); /* this delay helps reduce reissue counts + * (reason not yet researched) */ + goto rewrite; } if (rcnt > MUSYCC_SR_RETRY_CNT) { - pr_warning("%s: failed service request (#%d)= %x, group %d.\n", - pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum); - SD_SEM_GIVE (&pi->sr_sem_busy); /* allow any next request */ - return; + pr_warning("%s: failed service request (#%d)= %x, group %d.\n", + pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum); + SD_SEM_GIVE (&pi->sr_sem_busy); /* allow any next request */ + return; } if (req == SR_CHIP_RESET) { - /* - * PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus - * the upcoming delay is used. Though the MUSYCC documentation - * suggests a read-after-write would supply the required delay, it's - * unclear what CPU/BUS clock speeds might have been assumed when - * suggesting this 'lack of ACK' workaround. Thus the use of uwait. - */ - OS_uwait (100000, "icard"); /* 100ms */ + /* + * PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus + * the upcoming delay is used. Though the MUSYCC documentation + * suggests a read-after-write would supply the required delay, it's + * unclear what CPU/BUS clock speeds might have been assumed when + * suggesting this 'lack of ACK' workaround. Thus the use of uwait. + */ + OS_uwait (100000, "icard"); /* 100ms */ } else { - FLUSH_MEM_READ (); - SD_SEM_TAKE (&pi->sr_sem_wait, "sakack"); /* sleep until SACK - * interrupt occurs */ + FLUSH_MEM_READ (); + SD_SEM_TAKE (&pi->sr_sem_wait, "sakack"); /* sleep until SACK + * interrupt occurs */ } SD_SEM_GIVE (&pi->sr_sem_busy); /* allow any next request */ } @@ -622,56 +622,56 @@ musycc_update_timeslots (mpi_t * pi) for (i = 0; i < 32; i++) { - int usedby = 0, last = 0, ts, j, bits[8]; - - u_int8_t lastval = 0; - - if (((i == 0) && e1mode) || /* disable if E1 mode */ - ((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI))) - || ((i > 23) && (!e1mode))) /* disable if T1 mode */ - { - pi->tsm[i] = 0xff; /* make tslot unavailable for this mode */ - } else - { - pi->tsm[i] = 0x00; /* make tslot available for assignment */ - } - for (j = 0; j < 8; j++) - bits[j] = -1; - for (ch = 0; ch < MUSYCC_NCHANS; ch++) - { - if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i])) - { - usedby++; - last = ch; - lastval = pi->chan[ch]->p.bitmask[i]; - for (j = 0; j < 8; j++) - if (lastval & (1 << j)) - bits[j] = ch; - pi->tsm[i] |= lastval; - } - } - if (!usedby) - ts = 0; - else if ((usedby == 1) && (lastval == 0xff)) - ts = (4 << 5) | last; - else if ((usedby == 1) && (lastval == 0x7f)) - ts = (5 << 5) | last; - else - { - int idx; - - if (bits[0] < 0) - ts = (6 << 5) | (idx = last); - else - ts = (7 << 5) | (idx = bits[0]); - for (j = 1; j < 8; j++) - { - pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]); - pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]); - } - } - pi->regram->rtsm[i] = ts; - pi->regram->ttsm[i] = ts; + int usedby = 0, last = 0, ts, j, bits[8]; + + u_int8_t lastval = 0; + + if (((i == 0) && e1mode) || /* disable if E1 mode */ + ((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI))) + || ((i > 23) && (!e1mode))) /* disable if T1 mode */ + { + pi->tsm[i] = 0xff; /* make tslot unavailable for this mode */ + } else + { + pi->tsm[i] = 0x00; /* make tslot available for assignment */ + } + for (j = 0; j < 8; j++) + bits[j] = -1; + for (ch = 0; ch < MUSYCC_NCHANS; ch++) + { + if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i])) + { + usedby++; + last = ch; + lastval = pi->chan[ch]->p.bitmask[i]; + for (j = 0; j < 8; j++) + if (lastval & (1 << j)) + bits[j] = ch; + pi->tsm[i] |= lastval; + } + } + if (!usedby) + ts = 0; + else if ((usedby == 1) && (lastval == 0xff)) + ts = (4 << 5) | last; + else if ((usedby == 1) && (lastval == 0x7f)) + ts = (5 << 5) | last; + else + { + int idx; + + if (bits[0] < 0) + ts = (6 << 5) | (idx = last); + else + ts = (7 << 5) | (idx = bits[0]); + for (j = 1; j < 8; j++) + { + pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]); + pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]); + } + } + pi->regram->rtsm[i] = ts; + pi->regram->ttsm[i] = ts; } FLUSH_MEM_WRITE (); @@ -701,15 +701,15 @@ musycc_update_timeslots (mpi_t * pi) #endif for (i = 0; i < 128; i++) { - gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS; - ch = pi->chan[gchan]; - if (ch->p.mode_56k) - tsen = MODE_56KBPS; - else - tsen = MODE_64KBPS; /* also the default */ - ts = ((pi->portnum % 4) == (i / 32)) ? (tsen << 5) | (i & hmask) : 0; - pi->regram->rtsm[i] = ts; - pi->regram->ttsm[i] = ts; + gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS; + ch = pi->chan[gchan]; + if (ch->p.mode_56k) + tsen = MODE_56KBPS; + else + tsen = MODE_64KBPS; /* also the default */ + ts = ((pi->portnum % 4) == (i / 32)) ? (tsen << 5) | (i & hmask) : 0; + pi->regram->rtsm[i] = ts; + pi->regram->ttsm[i] = ts; } FLUSH_MEM_WRITE (); musycc_serv_req (pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION); @@ -730,19 +730,19 @@ musycc_chan_proto (int proto) switch (proto) { case CFG_CH_PROTO_TRANS: /* 0 */ - reg = MUSYCC_CCD_TRANS; - break; + reg = MUSYCC_CCD_TRANS; + break; case CFG_CH_PROTO_SS7: /* 1 */ - reg = MUSYCC_CCD_SS7; - break; + reg = MUSYCC_CCD_SS7; + break; default: case CFG_CH_PROTO_ISLP_MODE: /* 4 */ case CFG_CH_PROTO_HDLC_FCS16: /* 2 */ - reg = MUSYCC_CCD_HDLC_FCS16; - break; + reg = MUSYCC_CCD_HDLC_FCS16; + break; case CFG_CH_PROTO_HDLC_FCS32: /* 3 */ - reg = MUSYCC_CCD_HDLC_FCS32; - break; + reg = MUSYCC_CCD_HDLC_FCS32; + break; } return reg; @@ -755,19 +755,19 @@ musycc_init_port (mpi_t * pi) pci_write_32 ((u_int32_t *) &pi->reg->gbp, OS_vtophys (pi->regram)); pi->regram->grcd = - __constant_cpu_to_le32 (MUSYCC_GRCD_RX_ENABLE | - MUSYCC_GRCD_TX_ENABLE | - MUSYCC_GRCD_SF_ALIGN | - MUSYCC_GRCD_SUBCHAN_DISABLE | - MUSYCC_GRCD_OOFMP_DISABLE | - MUSYCC_GRCD_COFAIRQ_DISABLE | - MUSYCC_GRCD_MC_ENABLE | - (MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT)); + __constant_cpu_to_le32 (MUSYCC_GRCD_RX_ENABLE | + MUSYCC_GRCD_TX_ENABLE | + MUSYCC_GRCD_SF_ALIGN | + MUSYCC_GRCD_SUBCHAN_DISABLE | + MUSYCC_GRCD_OOFMP_DISABLE | + MUSYCC_GRCD_COFAIRQ_DISABLE | + MUSYCC_GRCD_MC_ENABLE | + (MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT)); pi->regram->pcd = - __constant_cpu_to_le32 (MUSYCC_PCD_E1X4_MODE | - MUSYCC_PCD_TXDATA_RISING | - MUSYCC_PCD_TX_DRIVEN); + __constant_cpu_to_le32 (MUSYCC_PCD_E1X4_MODE | + MUSYCC_PCD_TXDATA_RISING | + MUSYCC_PCD_TX_DRIVEN); /* Message length descriptor */ pi->regram->mld = __constant_cpu_to_le32 (cxt1e1_max_mru | (cxt1e1_max_mru << 16)); @@ -800,43 +800,43 @@ musycc_init (ci_t * ci) regaddr = OS_kmalloc ((INT_QUEUE_SIZE + 1) * sizeof (u_int32_t)); if (regaddr == 0) - return ENOMEM; + return ENOMEM; ci->iqd_p_saved = regaddr; /* save orig value for free's usage */ ci->iqd_p = (u_int32_t *) ((unsigned long) (regaddr + INT_QUEUE_BOUNDARY - 1) & - (~(INT_QUEUE_BOUNDARY - 1))); /* this calculates - * closest boundary */ + (~(INT_QUEUE_BOUNDARY - 1))); /* this calculates + * closest boundary */ for (i = 0; i < INT_QUEUE_SIZE; i++) { - ci->iqd_p[i] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY); + ci->iqd_p[i] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY); } for (i = 0; i < ci->max_port; i++) { - mpi_t *pi = &ci->port[i]; + mpi_t *pi = &ci->port[i]; - /* - * Per MUSYCC manual, Section 6.3.2 - "The host must allocate a 2KB - * bound memory segment for Channel Group 0." - */ + /* + * Per MUSYCC manual, Section 6.3.2 - "The host must allocate a 2KB + * bound memory segment for Channel Group 0." + */ #define GROUP_BOUNDARY 0x800 - regaddr = OS_kmalloc (sizeof (struct musycc_groupr) + GROUP_BOUNDARY); - if (regaddr == 0) - { - for (gchan = 0; gchan < i; gchan++) - { - pi = &ci->port[gchan]; - OS_kfree (pi->reg); - pi->reg = 0; - } - return ENOMEM; - } - pi->regram_saved = regaddr; /* save orig value for free's usage */ - pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) & - (~(GROUP_BOUNDARY - 1))); /* this calculates - * closest boundary */ + regaddr = OS_kmalloc (sizeof (struct musycc_groupr) + GROUP_BOUNDARY); + if (regaddr == 0) + { + for (gchan = 0; gchan < i; gchan++) + { + pi = &ci->port[gchan]; + OS_kfree (pi->reg); + pi->reg = 0; + } + return ENOMEM; + } + pi->regram_saved = regaddr; /* save orig value for free's usage */ + pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) & + (~(GROUP_BOUNDARY - 1))); /* this calculates + * closest boundary */ } /* any board centric MUSYCC commands will use group ZERO as its "home" */ @@ -858,7 +858,7 @@ musycc_init (ci_t * ci) FLUSH_MEM_WRITE (); ci->state = C_RUNNING; /* mark as full interrupt processing - * available */ + * available */ musycc_serv_req (&ci->port[0], SR_GLOBAL_INIT); /* FIRST INTERRUPT ! */ @@ -866,19 +866,19 @@ musycc_init (ci_t * ci) if (cxt1e1_max_mru > 0xffe) { - pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n", - cxt1e1_max_mru, 0xffe); - cxt1e1_max_mru = 0xffe; + pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n", + cxt1e1_max_mru, 0xffe); + cxt1e1_max_mru = 0xffe; } if (cxt1e1_max_mtu > 0xffe) { - pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n", - cxt1e1_max_mtu, 0xffe); - cxt1e1_max_mtu = 0xffe; + pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n", + cxt1e1_max_mtu, 0xffe); + cxt1e1_max_mtu = 0xffe; } #ifdef SBE_WAN256T3_ENABLE for (i = 0; i < MUSYCC_NPORTS; i++) - musycc_init_port (&ci->port[i]); + musycc_init_port (&ci->port[i]); #endif return SBE_DRVR_SUCCESS; /* no error */ @@ -902,13 +902,13 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan) ch = pi->chan[gchan]; if (ch == 0 || ch->state != UP) { - if (cxt1e1_log_level >= LOG_ERROR) - pr_info("%s: intr: xmit EOM on uninitialized channel %d\n", - pi->up->devname, gchan); + if (cxt1e1_log_level >= LOG_ERROR) + pr_info("%s: intr: xmit EOM on uninitialized channel %d\n", + pi->up->devname, gchan); } if (ch == 0 || ch->mdt == 0) - return; /* note: mdt==0 implies a malloc() - * failure w/in chan_up() routine */ + return; /* note: mdt==0 implies a malloc() + * failure w/in chan_up() routine */ #if 0 #ifdef SBE_ISR_INLINE @@ -919,107 +919,107 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan) #endif do { - FLUSH_MEM_READ (); - md = ch->txd_irq_srv; - status = le32_to_cpu (md->status); - - /* - * Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned - * Transmit Buffer Descriptor during Transparent Mode. - */ - if (status & MUSYCC_TX_OWNED) - { - int readCount, loopCount; - - /***********************************************************/ - /* HW Bug Fix */ - /* ---------- */ - /* Under certain PCI Bus loading conditions, the data */ - /* associated with an update of Shared Memory is delayed */ - /* relative to its PCI Interrupt. This is caught when */ - /* the host determines it does not yet OWN the descriptor. */ - /***********************************************************/ - - readCount = 0; - while (status & MUSYCC_TX_OWNED) - { - for (loopCount = 0; loopCount < 0x30; loopCount++) - OS_uwait_dummy (); /* use call to avoid optimization - * removal of dummy delay */ - FLUSH_MEM_READ (); - status = le32_to_cpu (md->status); - if (readCount++ > 40) - break; /* don't wait any longer */ - } - if (status & MUSYCC_TX_OWNED) - { - if (cxt1e1_log_level >= LOG_MONITOR) - { - pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n", - pi->up->devname, pi->portnum, ch->channum, - md, status); - pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n", - ch->user, ch->txd_irq_srv, ch->txd_usr_add, - sd_queue_stopped (ch->user), - ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode); - musycc_dump_txbuffer_ring (ch, 0); - } - break; /* Not our mdesc, done */ - } else - { - if (cxt1e1_log_level >= LOG_MONITOR) - pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n", - pi->up->devname, pi->portnum, ch->channum, readCount, md, status); - } - } - ch->txd_irq_srv = md->snext; - - md->data = 0; - if (md->mem_token != 0) - { - /* upcount channel */ - atomic_sub (OS_mem_token_tlen (md->mem_token), &ch->tx_pending); - /* upcount card */ - atomic_sub (OS_mem_token_tlen (md->mem_token), &pi->up->tx_pending); + FLUSH_MEM_READ (); + md = ch->txd_irq_srv; + status = le32_to_cpu (md->status); + + /* + * Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned + * Transmit Buffer Descriptor during Transparent Mode. + */ + if (status & MUSYCC_TX_OWNED) + { + int readCount, loopCount; + + /***********************************************************/ + /* HW Bug Fix */ + /* ---------- */ + /* Under certain PCI Bus loading conditions, the data */ + /* associated with an update of Shared Memory is delayed */ + /* relative to its PCI Interrupt. This is caught when */ + /* the host determines it does not yet OWN the descriptor. */ + /***********************************************************/ + + readCount = 0; + while (status & MUSYCC_TX_OWNED) + { + for (loopCount = 0; loopCount < 0x30; loopCount++) + OS_uwait_dummy (); /* use call to avoid optimization + * removal of dummy delay */ + FLUSH_MEM_READ (); + status = le32_to_cpu (md->status); + if (readCount++ > 40) + break; /* don't wait any longer */ + } + if (status & MUSYCC_TX_OWNED) + { + if (cxt1e1_log_level >= LOG_MONITOR) + { + pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n", + pi->up->devname, pi->portnum, ch->channum, + md, status); + pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n", + ch->user, ch->txd_irq_srv, ch->txd_usr_add, + sd_queue_stopped (ch->user), + ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode); + musycc_dump_txbuffer_ring (ch, 0); + } + break; /* Not our mdesc, done */ + } else + { + if (cxt1e1_log_level >= LOG_MONITOR) + pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n", + pi->up->devname, pi->portnum, ch->channum, readCount, md, status); + } + } + ch->txd_irq_srv = md->snext; + + md->data = 0; + if (md->mem_token != 0) + { + /* upcount channel */ + atomic_sub (OS_mem_token_tlen (md->mem_token), &ch->tx_pending); + /* upcount card */ + atomic_sub (OS_mem_token_tlen (md->mem_token), &pi->up->tx_pending); #ifdef SBE_WAN256T3_ENABLE - if (!atomic_read (&pi->up->tx_pending)) - wan256t3_led (pi->up, LED_TX, 0); + if (!atomic_read (&pi->up->tx_pending)) + wan256t3_led (pi->up, LED_TX, 0); #endif #ifdef CONFIG_SBE_WAN256T3_NCOMM - /* callback that our packet was sent */ - { - int hdlcnum = (pi->portnum * 32 + gchan); - - if (hdlcnum >= 228) - { - if (nciProcess_TX_complete) - (*nciProcess_TX_complete) (hdlcnum, - getuserbychan (gchan)); - } - } + /* callback that our packet was sent */ + { + int hdlcnum = (pi->portnum * 32 + gchan); + + if (hdlcnum >= 228) + { + if (nciProcess_TX_complete) + (*nciProcess_TX_complete) (hdlcnum, + getuserbychan (gchan)); + } + } #endif /*** CONFIG_SBE_WAN256T3_NCOMM ***/ - OS_mem_token_free_irq (md->mem_token); - md->mem_token = 0; - } - md->status = 0; + OS_mem_token_free_irq (md->mem_token); + md->mem_token = 0; + } + md->status = 0; #ifdef RLD_TXFULL_DEBUG - if (cxt1e1_log_level >= LOG_MONITOR2) - pr_info("~~ tx_eom: tx_full %x txd_free %d -> %d\n", - ch->tx_full, ch->txd_free, ch->txd_free + 1); + if (cxt1e1_log_level >= LOG_MONITOR2) + pr_info("~~ tx_eom: tx_full %x txd_free %d -> %d\n", + ch->tx_full, ch->txd_free, ch->txd_free + 1); #endif - ++ch->txd_free; - FLUSH_MEM_WRITE (); - - if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE)) - { - if (cxt1e1_log_level >= LOG_MONITOR) - pr_info("%s: Mode (%x) incorrect EOB status (%x)\n", - pi->up->devname, ch->p.chan_mode, status); - if ((status & EOMIRQ_ENABLE) == 0) - break; - } + ++ch->txd_free; + FLUSH_MEM_WRITE (); + + if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE)) + { + if (cxt1e1_log_level >= LOG_MONITOR) + pr_info("%s: Mode (%x) incorrect EOB status (%x)\n", + pi->up->devname, ch->p.chan_mode, status); + if ((status & EOMIRQ_ENABLE) == 0) + break; + } } while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0)); /* @@ -1036,33 +1036,33 @@ musycc_bh_tx_eom (mpi_t * pi, int gchan) */ if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2))) { - /* - * Then, only releave task stoppage if we actually have enough - * buffers to service the last requested packet. It may require MORE - * than half the available! - */ - if (ch->txd_free >= ch->txd_required) - { + /* + * Then, only releave task stoppage if we actually have enough + * buffers to service the last requested packet. It may require MORE + * than half the available! + */ + if (ch->txd_free >= ch->txd_required) + { #ifdef RLD_TXFULL_DEBUG - if (cxt1e1_log_level >= LOG_MONITOR2) - pr_info("tx_eom[%d]: enable xmit tx_full no more, txd_free %d txd_num/2 %d\n", - ch->channum, - ch->txd_free, ch->txd_num / 2); + if (cxt1e1_log_level >= LOG_MONITOR2) + pr_info("tx_eom[%d]: enable xmit tx_full no more, txd_free %d txd_num/2 %d\n", + ch->channum, + ch->txd_free, ch->txd_num / 2); #endif - ch->tx_full = 0; - ch->txd_required = 0; - sd_enable_xmit (ch->user); /* re-enable to catch flow controlled - * channel */ - } + ch->tx_full = 0; + ch->txd_required = 0; + sd_enable_xmit (ch->user); /* re-enable to catch flow controlled + * channel */ + } } #ifdef RLD_TXFULL_DEBUG else if (ch->tx_full) { - if (cxt1e1_log_level >= LOG_MONITOR2) - pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n", - ch->channum, - ch->txd_free, ch->txd_num / 2); + if (cxt1e1_log_level >= LOG_MONITOR2) + pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n", + ch->channum, + ch->txd_free, ch->txd_num / 2); } #endif @@ -1089,81 +1089,81 @@ musycc_bh_rx_eom (mpi_t * pi, int gchan) ch = pi->chan[gchan]; if (ch == 0 || ch->state != UP) { - if (cxt1e1_log_level > LOG_ERROR) - pr_info("%s: intr: receive EOM on uninitialized channel %d\n", - pi->up->devname, gchan); - return; + if (cxt1e1_log_level > LOG_ERROR) + pr_info("%s: intr: receive EOM on uninitialized channel %d\n", + pi->up->devname, gchan); + return; } if (ch->mdr == 0) - return; /* can this happen ? */ + return; /* can this happen ? */ for (;;) { - FLUSH_MEM_READ (); - md = &ch->mdr[ch->rxix_irq_srv]; - status = le32_to_cpu (md->status); - if (!(status & HOST_RX_OWNED)) - break; /* Not our mdesc, done */ - m = md->mem_token; - error = (status >> 16) & 0xf; - if (error == 0) - { + FLUSH_MEM_READ (); + md = &ch->mdr[ch->rxix_irq_srv]; + status = le32_to_cpu (md->status); + if (!(status & HOST_RX_OWNED)) + break; /* Not our mdesc, done */ + m = md->mem_token; + error = (status >> 16) & 0xf; + if (error == 0) + { #ifdef CONFIG_SBE_WAN256T3_NCOMM - int hdlcnum = (pi->portnum * 32 + gchan); - - /* - * if the packet number belongs to NCOMM, then send it to the TMS - * driver - */ - if (hdlcnum >= 228) - { - if (nciProcess_RX_packet) - (*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user); - } else + int hdlcnum = (pi->portnum * 32 + gchan); + + /* + * if the packet number belongs to NCOMM, then send it to the TMS + * driver + */ + if (hdlcnum >= 228) + { + if (nciProcess_RX_packet) + (*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user); + } else #endif /*** CONFIG_SBE_WAN256T3_NCOMM ***/ - { - if ((m2 = OS_mem_token_alloc (cxt1e1_max_mru))) - { - /* substitute the mbuf+cluster */ - md->mem_token = m2; - md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m2))); - - /* pass the received mbuf upward */ - sd_recv_consume (m, status & LENGTH_MASK, ch->user); - ch->s.rx_packets++; - ch->s.rx_bytes += status & LENGTH_MASK; - } else - { - ch->s.rx_dropped++; - } - } - } else if (error == ERR_FCS) - { - ch->s.rx_crc_errors++; - } else if (error == ERR_ALIGN) - { - ch->s.rx_missed_errors++; - } else if (error == ERR_ABT) - { - ch->s.rx_missed_errors++; - } else if (error == ERR_LNG) - { - ch->s.rx_length_errors++; - } else if (error == ERR_SHT) - { - ch->s.rx_length_errors++; - } - FLUSH_MEM_WRITE (); - status = cxt1e1_max_mru; - if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) - status |= EOBIRQ_ENABLE; - md->status = cpu_to_le32 (status); - - /* Check next mdesc in the ring */ - if (++ch->rxix_irq_srv >= ch->rxd_num) - ch->rxix_irq_srv = 0; - FLUSH_MEM_WRITE (); + { + if ((m2 = OS_mem_token_alloc (cxt1e1_max_mru))) + { + /* substitute the mbuf+cluster */ + md->mem_token = m2; + md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m2))); + + /* pass the received mbuf upward */ + sd_recv_consume (m, status & LENGTH_MASK, ch->user); + ch->s.rx_packets++; + ch->s.rx_bytes += status & LENGTH_MASK; + } else + { + ch->s.rx_dropped++; + } + } + } else if (error == ERR_FCS) + { + ch->s.rx_crc_errors++; + } else if (error == ERR_ALIGN) + { + ch->s.rx_missed_errors++; + } else if (error == ERR_ABT) + { + ch->s.rx_missed_errors++; + } else if (error == ERR_LNG) + { + ch->s.rx_length_errors++; + } else if (error == ERR_SHT) + { + ch->s.rx_length_errors++; + } + FLUSH_MEM_WRITE (); + status = cxt1e1_max_mru; + if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) + status |= EOBIRQ_ENABLE; + md->status = cpu_to_le32 (status); + + /* Check next mdesc in the ring */ + if (++ch->rxix_irq_srv >= ch->rxd_num) + ch->rxix_irq_srv = 0; + FLUSH_MEM_WRITE (); } } @@ -1181,7 +1181,7 @@ musycc_intr_th_handler (void *devp) */ if (ci->state == C_INIT) { - return IRQ_NONE; + return IRQ_NONE; } /* * Marked as hardware available. Don't service interrupts, just clear the @@ -1190,11 +1190,11 @@ musycc_intr_th_handler (void *devp) if (ci->state == C_IDLE) { - status = pci_read_32 ((u_int32_t *) &ci->reg->isd); + status = pci_read_32 ((u_int32_t *) &ci->reg->isd); - /* clear the interrupt but process nothing else */ - pci_write_32 ((u_int32_t *) &ci->reg->isd, status); - return IRQ_HANDLED; + /* clear the interrupt but process nothing else */ + pci_write_32 ((u_int32_t *) &ci->reg->isd, status); + return IRQ_HANDLED; } FLUSH_PCI_READ (); FLUSH_MEM_READ (); @@ -1220,20 +1220,20 @@ musycc_intr_th_handler (void *devp) if (nextInt != INTRPTS_NEXTINT (ci->intlog.this_status_new)) { - if (cxt1e1_log_level >= LOG_MONITOR) - { - pr_info("%s: note - updated ISD from %08x to %08x\n", - ci->devname, status, - (status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new); - } - /* - * Replace bogus status with software corrected value. - * - * It's not known whether, during this problem occurrence, if the - * INTFULL bit is correctly reported or not. - */ - status = (status & (~INTRPTS_NEXTINT_M)) | (ci->intlog.this_status_new); - nextInt = INTRPTS_NEXTINT (status); + if (cxt1e1_log_level >= LOG_MONITOR) + { + pr_info("%s: note - updated ISD from %08x to %08x\n", + ci->devname, status, + (status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new); + } + /* + * Replace bogus status with software corrected value. + * + * It's not known whether, during this problem occurrence, if the + * INTFULL bit is correctly reported or not. + */ + status = (status & (~INTRPTS_NEXTINT_M)) | (ci->intlog.this_status_new); + nextInt = INTRPTS_NEXTINT (status); } /**********************************************/ /* Cn847x Bug Fix */ @@ -1244,42 +1244,42 @@ musycc_intr_th_handler (void *devp) if (intCnt == INT_QUEUE_SIZE) { - currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1); + currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1); } else - /************************************************/ - /* Interrupt Write Location Issues */ - /* ------------------------------- */ - /* When the interrupt status descriptor is */ - /* written, the interrupt line is de-asserted */ - /* by the Cn847x. In the case of MIPS */ - /* microprocessors, this must occur at the */ - /* beginning of the interrupt handler so that */ - /* the interrupt handle is not re-entered due */ - /* to interrupt dis-assertion latency. */ - /* In the case of all other processors, this */ - /* action should occur at the end of the */ - /* interrupt handler to avoid overwriting the */ - /* interrupt queue. */ - /************************************************/ + /************************************************/ + /* Interrupt Write Location Issues */ + /* ------------------------------- */ + /* When the interrupt status descriptor is */ + /* written, the interrupt line is de-asserted */ + /* by the Cn847x. In the case of MIPS */ + /* microprocessors, this must occur at the */ + /* beginning of the interrupt handler so that */ + /* the interrupt handle is not re-entered due */ + /* to interrupt dis-assertion latency. */ + /* In the case of all other processors, this */ + /* action should occur at the end of the */ + /* interrupt handler to avoid overwriting the */ + /* interrupt queue. */ + /************************************************/ if (intCnt) { - currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1); + currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1); } else { - /* - * NOTE: Servicing an interrupt whose ISD contains a count of ZERO - * can be indicative of a Shared Interrupt chain. Our driver can be - * called from the system's interrupt handler as a matter of the OS - * walking the chain. As the chain is walked, the interrupt will - * eventually be serviced by the correct driver/handler. - */ + /* + * NOTE: Servicing an interrupt whose ISD contains a count of ZERO + * can be indicative of a Shared Interrupt chain. Our driver can be + * called from the system's interrupt handler as a matter of the OS + * walking the chain. As the chain is walked, the interrupt will + * eventually be serviced by the correct driver/handler. + */ #if 0 - /* chained interrupt = not ours */ - pr_info(">> %s: intCnt NULL, sts %x, possibly a chained interrupt!\n", - ci->devname, status); + /* chained interrupt = not ours */ + pr_info(">> %s: intCnt NULL, sts %x, possibly a chained interrupt!\n", + ci->devname, status); #endif - return IRQ_NONE; + return IRQ_NONE; } ci->iqp_tailx = currInt; @@ -1290,12 +1290,12 @@ musycc_intr_th_handler (void *devp) if ((cxt1e1_log_level >= LOG_WARN) && (status & INTRPTS_INTFULL_M)) { - pr_info("%s: Interrupt queue full condition occurred\n", ci->devname); + pr_info("%s: Interrupt queue full condition occurred\n", ci->devname); } if (cxt1e1_log_level >= LOG_DEBUG) - pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n", - ci->devname, &ci->reg->isd, - status, nextInt, intCnt, (intCnt + nextInt) & (INT_QUEUE_SIZE - 1)); + pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n", + ci->devname, &ci->reg->isd, + status, nextInt, intCnt, (intCnt + nextInt) & (INT_QUEUE_SIZE - 1)); FLUSH_MEM_WRITE (); #if defined(SBE_ISR_TASKLET) @@ -1339,18 +1339,18 @@ musycc_intr_bh_tasklet (ci_t * ci) if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT)) { #if defined(SBE_ISR_IMMEDIATE) - return 0L; + return 0L; #else - return; + return; #endif } #if defined(SBE_ISR_TASKLET) || defined(SBE_ISR_IMMEDIATE) if (drvr_state != SBE_DRVR_AVAILABLE) { #if defined(SBE_ISR_TASKLET) - return; + return; #elif defined(SBE_ISR_IMMEDIATE) - return 0L; + return 0L; #endif } #elif defined(SBE_ISR_INLINE) @@ -1360,271 +1360,271 @@ musycc_intr_bh_tasklet (ci_t * ci) ci->intlog.drvr_intr_bhcount++; FLUSH_MEM_READ (); { - unsigned int bh = atomic_read (&ci->bh_pending); + unsigned int bh = atomic_read (&ci->bh_pending); - max_bh = max (bh, max_bh); + max_bh = max (bh, max_bh); } atomic_set (&ci->bh_pending, 0);/* if here, no longer pending */ while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx)) { - intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE); - currInt = le32_to_cpu (ci->iqd_p[headx]); - - max_intcnt = max (intCnt, max_intcnt); /* RLD DEBUG */ - - /**************************************************/ - /* HW Bug Fix */ - /* ---------- */ - /* The following code checks for the condition */ - /* of interrupt assertion before interrupt */ - /* queue update. This is a problem on several */ - /* PCI-Local bridge chips found on some products. */ - /**************************************************/ - - readCount = 0; - if ((currInt == badInt) || (currInt == badInt2)) - ci->intlog.drvr_int_failure++; - - while ((currInt == badInt) || (currInt == badInt2)) - { - for (loopCount = 0; loopCount < 0x30; loopCount++) - OS_uwait_dummy (); /* use call to avoid optimization removal - * of dummy delay */ - FLUSH_MEM_READ (); - currInt = le32_to_cpu (ci->iqd_p[headx]); - if (readCount++ > 20) - break; - } - - if ((currInt == badInt) || (currInt == badInt2)) /* catch failure of Bug - * Fix checking */ - { - if (cxt1e1_log_level >= LOG_WARN) - pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n", - ci->devname, &ci->iqd_p[headx], headx); - - /* - * If the descriptor has not recovered, then leaving the EMPTY - * entry set will not signal to the MUSYCC that this descriptor - * has been serviced. The Interrupt Queue can then start losing - * available descriptors and MUSYCC eventually encounters and - * reports the INTFULL condition. Per manual, changing any bit - * marks descriptor as available, thus the use of different - * EMPTY_ENTRY values. - */ - - if (currInt == badInt) - { - ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY2); - } else - { - ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY); - } - ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */ - FLUSH_MEM_WRITE (); - FLUSH_MEM_READ (); - continue; - } - group = INTRPT_GRP (currInt); - gchan = INTRPT_CH (currInt); - event = INTRPT_EVENT (currInt); - err = INTRPT_ERROR (currInt); - tx = currInt & INTRPT_DIR_M; - - ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY); - FLUSH_MEM_WRITE (); - - if (cxt1e1_log_level >= LOG_DEBUG) - { - if (err != 0) - pr_info(" %08x -> err: %2d,", currInt, err); - - pr_info("+ interrupt event: %d, grp: %d, chan: %2d, side: %cX\n", - event, group, gchan, tx ? 'T' : 'R'); - } - pi = &ci->port[group]; /* notice that here we assume 1-1 group - - * port mapping */ - ch = pi->chan[gchan]; - switch (event) - { - case EVE_SACK: /* Service Request Acknowledge */ - if (cxt1e1_log_level >= LOG_DEBUG) - { - volatile u_int32_t r; - - r = pci_read_32 ((u_int32_t *) &pi->reg->srd); - pr_info("- SACK cmd: %08x (hdw= %08x)\n", pi->sr_last, r); - } - SD_SEM_GIVE (&pi->sr_sem_wait); /* wake up waiting process */ - break; - case EVE_CHABT: /* Change To Abort Code (0x7e -> 0xff) */ - case EVE_CHIC: /* Change To Idle Code (0xff -> 0x7e) */ - break; - case EVE_EOM: /* End Of Message */ - case EVE_EOB: /* End Of Buffer (Transparent mode) */ - if (tx) - { - musycc_bh_tx_eom (pi, gchan); - } else - { - musycc_bh_rx_eom (pi, gchan); - } + intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE); + currInt = le32_to_cpu (ci->iqd_p[headx]); + + max_intcnt = max (intCnt, max_intcnt); /* RLD DEBUG */ + + /**************************************************/ + /* HW Bug Fix */ + /* ---------- */ + /* The following code checks for the condition */ + /* of interrupt assertion before interrupt */ + /* queue update. This is a problem on several */ + /* PCI-Local bridge chips found on some products. */ + /**************************************************/ + + readCount = 0; + if ((currInt == badInt) || (currInt == badInt2)) + ci->intlog.drvr_int_failure++; + + while ((currInt == badInt) || (currInt == badInt2)) + { + for (loopCount = 0; loopCount < 0x30; loopCount++) + OS_uwait_dummy (); /* use call to avoid optimization removal + * of dummy delay */ + FLUSH_MEM_READ (); + currInt = le32_to_cpu (ci->iqd_p[headx]); + if (readCount++ > 20) + break; + } + + if ((currInt == badInt) || (currInt == badInt2)) /* catch failure of Bug + * Fix checking */ + { + if (cxt1e1_log_level >= LOG_WARN) + pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n", + ci->devname, &ci->iqd_p[headx], headx); + + /* + * If the descriptor has not recovered, then leaving the EMPTY + * entry set will not signal to the MUSYCC that this descriptor + * has been serviced. The Interrupt Queue can then start losing + * available descriptors and MUSYCC eventually encounters and + * reports the INTFULL condition. Per manual, changing any bit + * marks descriptor as available, thus the use of different + * EMPTY_ENTRY values. + */ + + if (currInt == badInt) + { + ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY2); + } else + { + ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY); + } + ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */ + FLUSH_MEM_WRITE (); + FLUSH_MEM_READ (); + continue; + } + group = INTRPT_GRP (currInt); + gchan = INTRPT_CH (currInt); + event = INTRPT_EVENT (currInt); + err = INTRPT_ERROR (currInt); + tx = currInt & INTRPT_DIR_M; + + ci->iqd_p[headx] = __constant_cpu_to_le32 (INT_EMPTY_ENTRY); + FLUSH_MEM_WRITE (); + + if (cxt1e1_log_level >= LOG_DEBUG) + { + if (err != 0) + pr_info(" %08x -> err: %2d,", currInt, err); + + pr_info("+ interrupt event: %d, grp: %d, chan: %2d, side: %cX\n", + event, group, gchan, tx ? 'T' : 'R'); + } + pi = &ci->port[group]; /* notice that here we assume 1-1 group - + * port mapping */ + ch = pi->chan[gchan]; + switch (event) + { + case EVE_SACK: /* Service Request Acknowledge */ + if (cxt1e1_log_level >= LOG_DEBUG) + { + volatile u_int32_t r; + + r = pci_read_32 ((u_int32_t *) &pi->reg->srd); + pr_info("- SACK cmd: %08x (hdw= %08x)\n", pi->sr_last, r); + } + SD_SEM_GIVE (&pi->sr_sem_wait); /* wake up waiting process */ + break; + case EVE_CHABT: /* Change To Abort Code (0x7e -> 0xff) */ + case EVE_CHIC: /* Change To Idle Code (0xff -> 0x7e) */ + break; + case EVE_EOM: /* End Of Message */ + case EVE_EOB: /* End Of Buffer (Transparent mode) */ + if (tx) + { + musycc_bh_tx_eom (pi, gchan); + } else + { + musycc_bh_rx_eom (pi, gchan); + } #if 0 - break; + break; #else - /* - * MUSYCC Interrupt Descriptor section states that EOB and EOM - * can be combined with the NONE error (as well as others). So - * drop thru to catch this... - */ + /* + * MUSYCC Interrupt Descriptor section states that EOB and EOM + * can be combined with the NONE error (as well as others). So + * drop thru to catch this... + */ #endif - case EVE_NONE: - if (err == ERR_SHT) - { - ch->s.rx_length_errors++; - } - break; - default: - if (cxt1e1_log_level >= LOG_WARN) - pr_info("%s: unexpected interrupt event: %d, iqd[%d]: %08x, port: %d\n", ci->devname, - event, headx, currInt, group); - break; - } /* switch on event */ - - - /* - * Per MUSYCC Manual, Section 6.4.8.3 [Transmit Errors], TX errors - * are service-affecting and require action to resume normal - * bit-level processing. - */ - - switch (err) - { - case ERR_ONR: - /* - * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], this - * error requires Transmit channel reactivation. - * - * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], this error - * requires Receive channel reactivation. - */ - if (tx) - { - - /* - * TX ONR Error only occurs when channel is configured for - * Transparent Mode. However, this code will catch and - * re-activate on ANY TX ONR error. - */ - - /* - * Set flag to re-enable on any next transmit attempt. - */ - ch->ch_start_tx = CH_START_TX_ONR; - - { + case EVE_NONE: + if (err == ERR_SHT) + { + ch->s.rx_length_errors++; + } + break; + default: + if (cxt1e1_log_level >= LOG_WARN) + pr_info("%s: unexpected interrupt event: %d, iqd[%d]: %08x, port: %d\n", ci->devname, + event, headx, currInt, group); + break; + } /* switch on event */ + + + /* + * Per MUSYCC Manual, Section 6.4.8.3 [Transmit Errors], TX errors + * are service-affecting and require action to resume normal + * bit-level processing. + */ + + switch (err) + { + case ERR_ONR: + /* + * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], this + * error requires Transmit channel reactivation. + * + * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], this error + * requires Receive channel reactivation. + */ + if (tx) + { + + /* + * TX ONR Error only occurs when channel is configured for + * Transparent Mode. However, this code will catch and + * re-activate on ANY TX ONR error. + */ + + /* + * Set flag to re-enable on any next transmit attempt. + */ + ch->ch_start_tx = CH_START_TX_ONR; + + { #ifdef RLD_TRANS_DEBUG - if (1 || cxt1e1_log_level >= LOG_MONITOR) + if (1 || cxt1e1_log_level >= LOG_MONITOR) #else - if (cxt1e1_log_level >= LOG_MONITOR) + if (cxt1e1_log_level >= LOG_MONITOR) #endif - { - pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n", - ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped (ch->user), ch->txd_free); + { + pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n", + ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped (ch->user), ch->txd_free); #ifdef RLD_DEBUG - if (ch->p.chan_mode == 2) /* problem = ONR on HDLC - * mode */ - { - pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n", - (u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add, - sd_queue_stopped (ch->user), - ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode); - musycc_dump_txbuffer_ring (ch, 0); - } + if (ch->p.chan_mode == 2) /* problem = ONR on HDLC + * mode */ + { + pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n", + (u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add, + sd_queue_stopped (ch->user), + ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode); + musycc_dump_txbuffer_ring (ch, 0); + } #endif - } - } - } else /* RX buffer overrun */ - { - /* - * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], - * channel recovery for this RX ONR error IS required. It is - * also suggested to increase the number of receive buffers - * for this channel. Receive channel reactivation IS - * required, and data has been lost. - */ - ch->s.rx_over_errors++; - ch->ch_start_rx = CH_START_RX_ONR; - - if (cxt1e1_log_level >= LOG_WARN) - { - pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n", - ci->devname, ch->channum, ch->p.chan_mode); - //musycc_dump_rxbuffer_ring (ch, 0); /* RLD DEBUG */ - } - } - musycc_chan_restart (ch); - break; - case ERR_BUF: - if (tx) - { - ch->s.tx_fifo_errors++; - ch->ch_start_tx = CH_START_TX_BUF; - /* - * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], - * this BUFF error requires Transmit channel reactivation. - */ - if (cxt1e1_log_level >= LOG_MONITOR) - pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n", - ci->devname, ch->channum, ch->p.chan_mode); - } else /* RX buffer overrun */ - { - ch->s.rx_over_errors++; - /* - * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC - * mode requires NO recovery for this RX BUFF error is - * required. It is suggested to increase the FIFO buffer - * space for this channel. Receive channel reactivation is - * not required, but data has been lost. - */ - if (cxt1e1_log_level >= LOG_WARN) - pr_info("%s: RX buffer overrun [BUFF] on channel %d, mode %x\n", - ci->devname, ch->channum, ch->p.chan_mode); - /* - * Per MUSYCC manual, Section 6.4.9.4 [Receive Errors], - * Transparent mode DOES require recovery for the RX BUFF - * error. It is suggested to increase the FIFO buffer space - * for this channel. Receive channel reactivation IS - * required and data has been lost. - */ - if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) - ch->ch_start_rx = CH_START_RX_BUF; - } - - if (tx || (ch->p.chan_mode == CFG_CH_PROTO_TRANS)) - musycc_chan_restart (ch); - break; - default: - break; - } /* switch on err */ - - /* Check for interrupt lost condition */ - if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR)) - { - pr_info("%s: Interrupt queue overflow - ILOST asserted\n", - ci->devname); - } - ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */ - FLUSH_MEM_WRITE (); - FLUSH_MEM_READ (); + } + } + } else /* RX buffer overrun */ + { + /* + * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], + * channel recovery for this RX ONR error IS required. It is + * also suggested to increase the number of receive buffers + * for this channel. Receive channel reactivation IS + * required, and data has been lost. + */ + ch->s.rx_over_errors++; + ch->ch_start_rx = CH_START_RX_ONR; + + if (cxt1e1_log_level >= LOG_WARN) + { + pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n", + ci->devname, ch->channum, ch->p.chan_mode); + //musycc_dump_rxbuffer_ring (ch, 0); /* RLD DEBUG */ + } + } + musycc_chan_restart (ch); + break; + case ERR_BUF: + if (tx) + { + ch->s.tx_fifo_errors++; + ch->ch_start_tx = CH_START_TX_BUF; + /* + * Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], + * this BUFF error requires Transmit channel reactivation. + */ + if (cxt1e1_log_level >= LOG_MONITOR) + pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n", + ci->devname, ch->channum, ch->p.chan_mode); + } else /* RX buffer overrun */ + { + ch->s.rx_over_errors++; + /* + * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC + * mode requires NO recovery for this RX BUFF error is + * required. It is suggested to increase the FIFO buffer + * space for this channel. Receive channel reactivation is + * not required, but data has been lost. + */ + if (cxt1e1_log_level >= LOG_WARN) + pr_info("%s: RX buffer overrun [BUFF] on channel %d, mode %x\n", + ci->devname, ch->channum, ch->p.chan_mode); + /* + * Per MUSYCC manual, Section 6.4.9.4 [Receive Errors], + * Transparent mode DOES require recovery for the RX BUFF + * error. It is suggested to increase the FIFO buffer space + * for this channel. Receive channel reactivation IS + * required and data has been lost. + */ + if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) + ch->ch_start_rx = CH_START_RX_BUF; + } + + if (tx || (ch->p.chan_mode == CFG_CH_PROTO_TRANS)) + musycc_chan_restart (ch); + break; + default: + break; + } /* switch on err */ + + /* Check for interrupt lost condition */ + if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR)) + { + pr_info("%s: Interrupt queue overflow - ILOST asserted\n", + ci->devname); + } + ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */ + FLUSH_MEM_WRITE (); + FLUSH_MEM_READ (); } /* while */ if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx)) { - int bh; + int bh; - bh = atomic_read (&CI->bh_pending); - pr_info("_bh_: late arrivals, head %d != tail %d, pending %d\n", - ci->iqp_headx, ci->iqp_tailx, bh); + bh = atomic_read (&CI->bh_pending); + pr_info("_bh_: late arrivals, head %d != tail %d, pending %d\n", + ci->iqp_headx, ci->iqp_tailx, bh); } #if defined(SBE_ISR_IMMEDIATE) return 0L; @@ -1641,7 +1641,7 @@ musycc_new_chan (ci_t * ci, int channum, void *user) ch = ci->port[channum / MUSYCC_NCHANS].chan[channum % MUSYCC_NCHANS]; if (ch->state != UNASSIGNED) - return EEXIST; + return EEXIST; /* NOTE: mch_t already cleared during OS_kmalloc() */ ch->state = DOWN; ch->user = user; @@ -1670,7 +1670,7 @@ musycc_chan_down (ci_t * dummy, int channum) int i, gchan; if (!(ch = sd_find_chan (dummy, channum))) - return EINVAL; + return EINVAL; pi = ch->up; gchan = ch->gchan; @@ -1681,7 +1681,7 @@ musycc_chan_down (ci_t * dummy, int channum) ch->ch_start_tx = 0; if (ch->state == DOWN) - return 0; + return 0; ch->state = DOWN; pi->regram->thp[gchan] = 0; @@ -1691,14 +1691,14 @@ musycc_chan_down (ci_t * dummy, int channum) FLUSH_MEM_WRITE (); for (i = 0; i < ch->txd_num; i++) { - if (ch->mdt[i].mem_token != 0) - OS_mem_token_free (ch->mdt[i].mem_token); + if (ch->mdt[i].mem_token != 0) + OS_mem_token_free (ch->mdt[i].mem_token); } for (i = 0; i < ch->rxd_num; i++) { - if (ch->mdr[i].mem_token != 0) - OS_mem_token_free (ch->mdr[i].mem_token); + if (ch->mdr[i].mem_token != 0) + OS_mem_token_free (ch->mdr[i].mem_token); } OS_kfree (ch->mdr); @@ -1723,11 +1723,11 @@ musycc_del_chan (ci_t * ci, int channum) mch_t *ch; if ((channum < 0) || (channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))) /* sanity chk param */ - return ECHRNG; + return ECHRNG; if (!(ch = sd_find_chan (ci, channum))) - return ENOENT; + return ENOENT; if (ch->state == UP) - musycc_chan_down (ci, channum); + musycc_chan_down (ci, channum); ch->state = UNASSIGNED; return 0; } @@ -1739,9 +1739,9 @@ musycc_del_chan_stats (ci_t * ci, int channum) mch_t *ch; if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS)) /* sanity chk param */ - return ECHRNG; + return ECHRNG; if (!(ch = sd_find_chan (ci, channum))) - return ENOENT; + return ENOENT; memset (&ch->s, 0, sizeof (struct sbecom_chan_stats)); return 0; @@ -1761,15 +1761,15 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token) u_int32_t len; if (!(ch = sd_find_chan (ci, channum))) - return -ENOENT; + return -ENOENT; if (ci->state != C_RUNNING) /* full interrupt processing available */ - return -EINVAL; + return -EINVAL; if (ch->state != UP) - return -EINVAL; + return -EINVAL; if (!(ch->status & TX_ENABLED)) - return -EROFS; /* how else to flag unwritable state ? */ + return -EROFS; /* how else to flag unwritable state ? */ #ifdef RLD_TRANS_DEBUGx if (1 || cxt1e1_log_level >= LOG_MONITOR2) @@ -1777,9 +1777,9 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token) if (cxt1e1_log_level >= LOG_MONITOR2) #endif { - pr_info("++ start_xmt[%d]: state %x start %x full %d free %d required %d stopped %x\n", - channum, ch->state, ch->ch_start_tx, ch->tx_full, - ch->txd_free, ch->txd_required, sd_queue_stopped (ch->user)); + pr_info("++ start_xmt[%d]: state %x start %x full %d free %d required %d stopped %x\n", + channum, ch->state, ch->ch_start_tx, ch->tx_full, + ch->txd_free, ch->txd_required, sd_queue_stopped (ch->user)); } /***********************************************/ /** Determine total amount of data to be sent **/ @@ -1787,35 +1787,35 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token) m2 = mem_token; txd_need_cnt = 0; for (len = OS_mem_token_tlen (m2); len > 0; - m2 = (void *) OS_mem_token_next (m2)) + m2 = (void *) OS_mem_token_next (m2)) { - if (!OS_mem_token_len (m2)) - continue; - txd_need_cnt++; - len -= OS_mem_token_len (m2); + if (!OS_mem_token_len (m2)) + continue; + txd_need_cnt++; + len -= OS_mem_token_len (m2); } if (txd_need_cnt == 0) { - if (cxt1e1_log_level >= LOG_MONITOR2) - pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum); - OS_mem_token_free (mem_token); - return 0; /* no data to send */ + if (cxt1e1_log_level >= LOG_MONITOR2) + pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum); + OS_mem_token_free (mem_token); + return 0; /* no data to send */ } /*************************************************/ /** Are there sufficient descriptors available? **/ /*************************************************/ if (txd_need_cnt > ch->txd_num) /* never enough descriptors for this - * large a buffer */ + * large a buffer */ { - if (cxt1e1_log_level >= LOG_DEBUG) - { - pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n", - ch->txd_num, txd_need_cnt + 1); - } - ch->s.tx_dropped++; - OS_mem_token_free (mem_token); - return 0; + if (cxt1e1_log_level >= LOG_DEBUG) + { + pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n", + ch->txd_num, txd_need_cnt + 1); + } + ch->s.tx_dropped++; + OS_mem_token_free (mem_token); + return 0; } #if 0 spin_lock_irqsave (&ch->ch_txlock, flags); @@ -1825,18 +1825,18 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token) /************************************************************/ if (txd_need_cnt > ch->txd_free) { - if (cxt1e1_log_level >= LOG_MONITOR2) - { - pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n", - channum, ch->txd_free, ch->txd_num, txd_need_cnt); - } - ch->tx_full = 1; - ch->txd_required = txd_need_cnt; - sd_disable_xmit (ch->user); + if (cxt1e1_log_level >= LOG_MONITOR2) + { + pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n", + channum, ch->txd_free, ch->txd_num, txd_need_cnt); + } + ch->tx_full = 1; + ch->txd_required = txd_need_cnt; + sd_disable_xmit (ch->user); #if 0 - spin_unlock_irqrestore (&ch->ch_txlock, flags); + spin_unlock_irqrestore (&ch->ch_txlock, flags); #endif - return -EBUSY; /* tell user to try again later */ + return -EBUSY; /* tell user to try again later */ } /**************************************************/ /** Put the user data into MUSYCC data buffer(s) **/ @@ -1846,57 +1846,57 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token) for (len = OS_mem_token_tlen (m2); len > 0; m2 = OS_mem_token_next (m2)) { - int u = OS_mem_token_len (m2); - - if (!u) - continue; - len -= u; - - /* - * Enable following chunks, yet wait to enable the FIRST chunk until - * after ALL subsequent chunks are setup. - */ - if (md != ch->txd_usr_add) /* not first chunk */ - u |= MUSYCC_TX_OWNED; /* transfer ownership from HOST to MUSYCC */ - - if (len) /* not last chunk */ - u |= EOBIRQ_ENABLE; - else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) - { - /* - * Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must - * always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor - * (IE. don't set herein). - */ - u |= EOBIRQ_ENABLE; - } else - u |= EOMIRQ_ENABLE; /* EOM, last HDLC chunk */ - - - /* last chunk in hdlc mode */ - u |= (ch->p.idlecode << IDLE_CODE); - if (ch->p.pad_fill_count) - { + int u = OS_mem_token_len (m2); + + if (!u) + continue; + len -= u; + + /* + * Enable following chunks, yet wait to enable the FIRST chunk until + * after ALL subsequent chunks are setup. + */ + if (md != ch->txd_usr_add) /* not first chunk */ + u |= MUSYCC_TX_OWNED; /* transfer ownership from HOST to MUSYCC */ + + if (len) /* not last chunk */ + u |= EOBIRQ_ENABLE; + else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) + { + /* + * Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must + * always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor + * (IE. don't set herein). + */ + u |= EOBIRQ_ENABLE; + } else + u |= EOMIRQ_ENABLE; /* EOM, last HDLC chunk */ + + + /* last chunk in hdlc mode */ + u |= (ch->p.idlecode << IDLE_CODE); + if (ch->p.pad_fill_count) + { #if 0 - /* NOOP NOTE: u_int8_t cannot be > 0xFF */ - /* sanitize pad_fill_count for maximums allowed by hardware */ - if (ch->p.pad_fill_count > EXTRA_FLAGS_MASK) - ch->p.pad_fill_count = EXTRA_FLAGS_MASK; + /* NOOP NOTE: u_int8_t cannot be > 0xFF */ + /* sanitize pad_fill_count for maximums allowed by hardware */ + if (ch->p.pad_fill_count > EXTRA_FLAGS_MASK) + ch->p.pad_fill_count = EXTRA_FLAGS_MASK; #endif - u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS)); - } - md->mem_token = len ? 0 : mem_token; /* Fill in mds on last - * segment, others set ZERO - * so that entire token is - * removed ONLY when ALL - * segments have been - * transmitted. */ - - md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m2))); - FLUSH_MEM_WRITE (); - md->status = cpu_to_le32 (u); - --ch->txd_free; - md = md->snext; + u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS)); + } + md->mem_token = len ? 0 : mem_token; /* Fill in mds on last + * segment, others set ZERO + * so that entire token is + * removed ONLY when ALL + * segments have been + * transmitted. */ + + md->data = cpu_to_le32 (OS_vtophys (OS_mem_token_data (m2))); + FLUSH_MEM_WRITE (); + md->status = cpu_to_le32 (u); + --ch->txd_free; + md = md->snext; } FLUSH_MEM_WRITE (); @@ -1920,7 +1920,7 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token) */ if (ch->ch_start_tx) { - musycc_chan_restart (ch); + musycc_chan_restart (ch); } #ifdef SBE_WAN256T3_ENABLE wan256t3_led (ci, LED_TX, LEDV_G);