From: Stephen Hemminger Date: Wed, 19 Sep 2007 22:36:44 +0000 (-0700) Subject: sky2: reorganize chip revision features X-Git-Tag: v3.12-rc1~26856^2~3 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ea76e63598eb312e5d33a782275be91038fc6df2;p=kernel%2Fkernel-generic.git sky2: reorganize chip revision features This patch should cause no functional changes in driver behaviour. There are (too) many revisions of the Yukon 2 chip now. Instead of adding more conditionals based on chip revision; rerganize into a set of feature flags so adding new versions is less problematic. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 94552cc..060951a 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -217,8 +217,7 @@ static void sky2_power_on(struct sky2_hw *hw) else sky2_write8(hw, B2_Y2_CLK_GATE, 0); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || - hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_ADV_POWER_CTL) { u32 reg; sky2_pci_write32(hw, PCI_DEV_REG3, 0); @@ -311,10 +310,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) struct sky2_port *sky2 = netdev_priv(hw->dev[port]); u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; - if (sky2->autoneg == AUTONEG_ENABLE - && !(hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX)) { + if (sky2->autoneg == AUTONEG_ENABLE && + !(hw->flags & SKY2_HW_NEWER_PHY)) { u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | @@ -346,9 +343,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* downshift on PHY 88E1112 and 88E1149 is changed */ if (sky2->autoneg == AUTONEG_ENABLE - && (hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX)) { + && (hw->flags & SKY2_HW_NEWER_PHY)) { /* set downshift counter to 3x and enable downshift */ ctrl &= ~PHY_M_PC_DSC_MSK; ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; @@ -364,7 +359,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); /* special setup for PHY 88E1112 Fiber */ - if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) { + if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) { pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ @@ -788,7 +783,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) { + if (!(hw->flags & SKY2_HW_RAMBUFFER)) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); @@ -967,19 +962,15 @@ static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) */ static void rx_set_checksum(struct sky2_port *sky2) { - struct sky2_rx_le *le; - - if (sky2->hw->chip_id != CHIP_ID_YUKON_EX) { - le = sky2_next_rx(sky2); - le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); - le->ctrl = 0; - le->opcode = OP_TCPSTART | HW_OWNER; + struct sky2_rx_le *le = sky2_next_rx(sky2); - sky2_write32(sky2->hw, - Q_ADDR(rxqaddr[sky2->port], Q_CSR), - sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); - } + le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); + le->ctrl = 0; + le->opcode = OP_TCPSTART | HW_OWNER; + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } /* @@ -1175,7 +1166,8 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); - rx_set_checksum(sky2); + if (!(hw->flags & SKY2_HW_NEW_LE)) + rx_set_checksum(sky2); /* Space needed for frame data + headers rounded up */ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); @@ -1246,7 +1238,7 @@ static int sky2_up(struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u32 ramsize, imask; + u32 imask; int cap, err = -ENOMEM; struct net_device *otherdev = hw->dev[sky2->port^1]; @@ -1301,13 +1293,13 @@ static int sky2_up(struct net_device *dev) sky2_mac_init(hw, port); - /* Register is number of 4K blocks on internal RAM buffer. */ - ramsize = sky2_read8(hw, B2_E_0) * 4; - printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize); - - if (ramsize > 0) { + if (hw->flags & SKY2_HW_RAMBUFFER) { + /* Register is number of 4K blocks on internal RAM buffer. */ + u32 ramsize = sky2_read8(hw, B2_E_0) * 4; u32 rxspace; + printk(KERN_DEBUG PFX "%s: ram buffer %dK\n", dev->name, ramsize); + if (ramsize < 16) rxspace = ramsize / 2; else @@ -1436,13 +1428,15 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Check for TCP Segmentation Offload */ mss = skb_shinfo(skb)->gso_size; if (mss != 0) { - if (hw->chip_id != CHIP_ID_YUKON_EX) + + if (!(hw->flags & SKY2_HW_NEW_LE)) mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb); if (mss != sky2->tx_last_mss) { le = get_tx_le(sky2); le->addr = cpu_to_le32(mss); - if (hw->chip_id == CHIP_ID_YUKON_EX) + + if (hw->flags & SKY2_HW_NEW_LE) le->opcode = OP_MSS | HW_OWNER; else le->opcode = OP_LRGLEN | HW_OWNER; @@ -1468,8 +1462,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Handle TCP checksum offload */ if (skb->ip_summed == CHECKSUM_PARTIAL) { /* On Yukon EX (some versions) encoding change. */ - if (hw->chip_id == CHIP_ID_YUKON_EX - && hw->chip_rev != CHIP_REV_YU_EX_B0) + if (hw->flags & SKY2_HW_AUTO_TX_SUM) ctrl |= CALSUM; /* auto checksum */ else { const unsigned offset = skb_transport_offset(skb); @@ -1708,7 +1701,7 @@ static int sky2_down(struct net_device *dev) static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) { - if (!sky2_is_copper(hw)) + if (hw->flags & SKY2_HW_FIBRE_PHY) return SPEED_1000; if (hw->chip_id == CHIP_ID_YUKON_FE) @@ -1753,9 +1746,7 @@ static void sky2_link_up(struct sky2_port *sky2) sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); - if (hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_NEWER_PHY) { u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */ @@ -1847,7 +1838,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) /* Since the pause result bits seem to in different positions on * different chips. look at registers. */ - if (!sky2_is_copper(hw)) { + if (hw->flags & SKY2_HW_FIBRE_PHY) { /* Shift for bits in fiber PHY */ advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM); lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM); @@ -2593,23 +2584,56 @@ static int __devinit sky2_init(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_CLR); hw->chip_id = sky2_read8(hw, B2_CHIP_ID); - if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) { + hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + + switch(hw->chip_id) { + case CHIP_ID_YUKON_XL: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_RAMBUFFER; + break; + + case CHIP_ID_YUKON_EC_U: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_ADV_POWER_CTL; + break; + + case CHIP_ID_YUKON_EX: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_NEW_LE + | SKY2_HW_ADV_POWER_CTL; + + /* New transmit checksum */ + if (hw->chip_rev != CHIP_REV_YU_EX_B0) + hw->flags |= SKY2_HW_AUTO_TX_SUM; + break; + + case CHIP_ID_YUKON_EC: + /* This rev is really old, and requires untested workarounds */ + if (hw->chip_rev == CHIP_REV_YU_EC_A1) { + dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); + return -EOPNOTSUPP; + } + hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RAMBUFFER; + break; + + case CHIP_ID_YUKON_FE: + hw->flags = SKY2_HW_RAMBUFFER; + break; + + default: dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", hw->chip_id); return -EOPNOTSUPP; } - hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); + if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') + hw->flags |= SKY2_HW_FIBRE_PHY; - /* This rev is really old, and requires untested workarounds */ - if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) { - dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n", - yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], - hw->chip_id, hw->chip_rev); - return -EOPNOTSUPP; - } - hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->ports = 1; t8 = sky2_read8(hw, B2_Y2_HW_RES); if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { @@ -2821,7 +2845,7 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw) | SUPPORTED_100baseT_Full | SUPPORTED_Autoneg | SUPPORTED_TP; - if (hw->chip_id != CHIP_ID_YUKON_FE) + if (hw->flags & SKY2_HW_GIGABIT) modes |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; return modes; @@ -3851,7 +3875,7 @@ static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) return IRQ_NONE; if (status & Y2_IS_IRQ_SW) { - hw->msi = 1; + hw->flags |= SKY2_HW_USE_MSI; wake_up(&hw->msi_wait); sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); } @@ -3879,9 +3903,9 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); sky2_read8(hw, B0_CTST); - wait_event_timeout(hw->msi_wait, hw->msi, HZ/10); + wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10); - if (!hw->msi) { + if (!(hw->flags & SKY2_HW_USE_MSI)) { /* MSI test failed, go back to INTx mode */ dev_info(&pdev->dev, "No interrupt generated using MSI, " "switching to INTx mode.\n"); @@ -4014,7 +4038,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } - err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED, + err = request_irq(pdev->irq, sky2_intr, + (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, dev->name, hw); if (err) { dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); @@ -4047,7 +4072,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: - if (hw->msi) + if (hw->flags & SKY2_HW_USE_MSI) pci_disable_msi(pdev); unregister_netdev(dev); err_out_free_netdev: @@ -4096,7 +4121,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); - if (hw->msi) + if (hw->flags & SKY2_HW_USE_MSI) pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 3baae48..af30349 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2040,6 +2040,15 @@ struct sky2_hw { void __iomem *regs; struct pci_dev *pdev; struct net_device *dev[2]; + unsigned long flags; +#define SKY2_HW_USE_MSI 0x00000001 +#define SKY2_HW_FIBRE_PHY 0x00000002 +#define SKY2_HW_GIGABIT 0x00000004 +#define SKY2_HW_NEWER_PHY 0x00000008 +#define SKY2_HW_RAMBUFFER 0x00000010 /* chip has RAM FIFO */ +#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ +#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ +#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ u8 chip_id; u8 chip_rev; @@ -2053,13 +2062,12 @@ struct sky2_hw { struct timer_list watchdog_timer; struct work_struct restart_work; - int msi; wait_queue_head_t msi_wait; }; static inline int sky2_is_copper(const struct sky2_hw *hw) { - return !(hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P'); + return !(hw->flags & SKY2_HW_FIBRE_PHY); } /* Register accessor for memory mapped device */