From: Thinh Nguyen Date: Fri, 22 Dec 2023 22:11:27 +0000 (+0000) Subject: Revert "usb: dwc3: Soft reset phy on probe for host" X-Git-Tag: v6.6.14~221 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e8d48c2282a913edb10c6ce1c4320e44b717b280;p=platform%2Fkernel%2Flinux-starfive.git Revert "usb: dwc3: Soft reset phy on probe for host" commit 7059fbebcb00554c3f31e5b5d93ef6d2d96dc7b4 upstream. This reverts commit 8bea147dfdf823eaa8d3baeccc7aeb041b41944b. The phy soft reset GUSB2PHYCFG.PHYSOFTRST only applies to UTMI phy, not ULPI. This fix is incomplete. Cc: Fixes: 8bea147dfdf8 ("usb: dwc3: Soft reset phy on probe for host") Reported-by: Köry Maincent Closes: https://lore.kernel.org/linux-usb/20231205151959.5236c231@kmaincent-XPS-13-7390 Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/29a26593a60eba727de872a3e580a674807b3339.1703282469.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 8d5af9c..d9b9bd2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -279,46 +279,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) * XHCI driver will reset the host block. If dwc3 was configured for * host-only mode or current role is host, then we can return early. */ - if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; - /* - * If the dr_mode is host and the dwc->current_dr_role is not the - * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode - * isn't executed yet. Ensure the phy is ready before the controller - * updates the GCTL.PRTCAPDIR or other settings by soft-resetting - * the phy. - * - * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n - * is port index. If this is a multiport host, then we need to reset - * all active ports. - */ - if (dwc->dr_mode == USB_DR_MODE_HOST) { - u32 usb3_port; - u32 usb2_port; - - usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Small delay for phy reset assertion */ - usleep_range(1000, 2000); - - usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Wait for clock synchronization */ - msleep(50); - return 0; - } - reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; reg &= ~DWC3_DCTL_RUN_STOP;