From: Przemyslaw Marczak <p.marczak@samsung.com>
Date: Fri, 21 Mar 2014 10:48:54 +0000 (+0100)
Subject: trats2: add implementation of board_poweroff() and CONFIG_CMD_POWEROFF
X-Git-Tag: submit/tizen/20150522.044923~46
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e582fa54a7f2daefd03e4378407d028678e8825c;p=platform%2Fkernel%2Fu-boot.git

trats2: add implementation of board_poweroff() and CONFIG_CMD_POWEROFF

This change adds implementation of function board_poweroff() which
turns off the device off by setting PSHOLD gpio to low state which
is a power off signal for main PMIC.

Change-Id: Iae97fb81d7e7e243079ac18d03f4fd917c50b62e
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
---

diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index a7377497e5..03f1d7d68b 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -431,3 +431,20 @@ void exynos_lcd_misc_init(vidinfo_t *vid)
 #endif
 }
 #endif /* LCD */
+
+#ifdef CONFIG_CMD_POWEROFF
+void board_poweroff(void)
+{
+	unsigned int val;
+	struct exynos4x12_power *power =
+		(struct exynos4x12_power *)samsung_get_base_power();
+
+	val = readl(&power->ps_hold_control);
+	val |= EXYNOS_PS_HOLD_CONTROL_EN_OUTPUT; /* set to output */
+	val &= ~EXYNOS_PS_HOLD_CONTROL_DATA_HIGH; /* set state to low */
+	writel(val, &power->ps_hold_control);
+
+	while (1);
+	/* Should not reach here */
+}
+#endif
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 95f2195765..4ba98a0a66 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -197,6 +197,7 @@ int get_soft_i2c_sda_pin(void);
 #define CONFIG_POWER_MUIC_MAX77693
 #define CONFIG_POWER_FG_MAX77693
 #define CONFIG_POWER_BATTERY_TRATS2
+#define CONFIG_CMD_POWEROFF
 
 /* Security subsystem - enable hw_rand() */
 #define CONFIG_EXYNOS_ACE_SHA