From: Michal Kazior Date: Mon, 25 Nov 2013 13:06:20 +0000 (+0100) Subject: ath10k: don't consume other's shared interrupts X-Git-Tag: upstream/snapshot3+hdmi~3572^2~482^2^2~43^2~9 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e539887b1521ed4aefce7387bc3f33814b11442d;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git ath10k: don't consume other's shared interrupts ath10k assumed all interrupts were directed to it. This isn't the case for legacy shared interrupts. ath10k consumed interrupts for other devices. Check device irq status and return IRQ_NONE when appropriate. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 8aeb46d..9535eaa 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -269,6 +269,7 @@ enum ath10k_mcast2ucast_mode { #define CORE_CTRL_CPU_INTR_MASK 0x00002000 #define CORE_CTRL_ADDRESS 0x0000 #define PCIE_INTR_ENABLE_ADDRESS 0x0008 +#define PCIE_INTR_CAUSE_ADDRESS 0x000c #define PCIE_INTR_CLR_ADDRESS 0x0014 #define SCRATCH_3_ADDRESS 0x0030 diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 2457c8b..12fb12e 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -201,6 +201,19 @@ static const struct ce_pipe_config target_ce_config_wlan[] = { /* CE7 used only by Host */ }; +static bool ath10k_pci_irq_pending(struct ath10k *ar) +{ + u32 cause; + + /* Check if the shared legacy irq is for us */ + cause = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + + PCIE_INTR_CAUSE_ADDRESS); + if (cause & (PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL)) + return true; + + return false; +} + /* * Diagnostic read/write access is provided for startup/config/debug usage. * Caller must guarantee proper alignment, when applicable, and single user @@ -2086,6 +2099,9 @@ static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg) struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); if (ar_pci->num_msi_intrs == 0) { + if (!ath10k_pci_irq_pending(ar)) + return IRQ_NONE; + /* * IMPORTANT: INTR_CLR regiser has to be set after * INTR_ENABLE is set to 0, otherwise interrupt can not be