From: Jeff LaBundy Date: Sat, 9 Apr 2022 02:15:20 +0000 (-0700) Subject: Input: add support for Azoteq IQS7222A/B/C X-Git-Tag: v6.1~32^2~29^2~24 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e505edaedcb9e7d16eefddc62d2189afaea0febc;p=platform%2Fkernel%2Flinux-starfive.git Input: add support for Azoteq IQS7222A/B/C This patch adds support for the Azoteq IQS7222A/B/C family of capacitive touch controllers. Signed-off-by: Jeff LaBundy Link: https://lore.kernel.org/r/20220403221659.865997-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index dd5227c..a18ab73 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -762,6 +762,16 @@ config INPUT_IQS626A To compile this driver as a module, choose M here: the module will be called iqs626a. +config INPUT_IQS7222 + tristate "Azoteq IQS7222A/B/C capacitive touch controller" + depends on I2C + help + Say Y to enable support for the Azoteq IQS7222A/B/C family + of capacitive touch controllers. + + To compile this driver as a module, choose M here: the + module will be called iqs7222. + config INPUT_CMA3000 tristate "VTI CMA3000 Tri-axis accelerometer" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index b92c53a..28dfc44 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o +obj-$(CONFIG_INPUT_IQS7222) += iqs7222.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c new file mode 100644 index 0000000..d800f71 --- /dev/null +++ b/drivers/input/misc/iqs7222.c @@ -0,0 +1,2445 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Azoteq IQS7222A/B/C Capacitive Touch Controller + * + * Copyright (C) 2022 Jeff LaBundy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IQS7222_PROD_NUM 0x00 +#define IQS7222_PROD_NUM_A 840 +#define IQS7222_PROD_NUM_B 698 +#define IQS7222_PROD_NUM_C 863 + +#define IQS7222_SYS_STATUS 0x10 +#define IQS7222_SYS_STATUS_RESET BIT(3) +#define IQS7222_SYS_STATUS_ATI_ERROR BIT(1) +#define IQS7222_SYS_STATUS_ATI_ACTIVE BIT(0) + +#define IQS7222_CHAN_SETUP_0_REF_MODE_MASK GENMASK(15, 14) +#define IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW BIT(15) +#define IQS7222_CHAN_SETUP_0_REF_MODE_REF BIT(14) +#define IQS7222_CHAN_SETUP_0_CHAN_EN BIT(8) + +#define IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK GENMASK(2, 0) +#define IQS7222_SLDR_SETUP_2_RES_MASK GENMASK(15, 8) +#define IQS7222_SLDR_SETUP_2_RES_SHIFT 8 +#define IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK GENMASK(7, 0) +#define IQS7222_SLDR_SETUP_3_CHAN_SEL_MASK GENMASK(9, 0) + +#define IQS7222_GPIO_SETUP_0_GPIO_EN BIT(0) + +#define IQS7222_SYS_SETUP 0xD0 +#define IQS7222_SYS_SETUP_INTF_MODE_MASK GENMASK(7, 6) +#define IQS7222_SYS_SETUP_INTF_MODE_TOUCH BIT(7) +#define IQS7222_SYS_SETUP_INTF_MODE_EVENT BIT(6) +#define IQS7222_SYS_SETUP_PWR_MODE_MASK GENMASK(5, 4) +#define IQS7222_SYS_SETUP_PWR_MODE_AUTO IQS7222_SYS_SETUP_PWR_MODE_MASK +#define IQS7222_SYS_SETUP_REDO_ATI BIT(2) +#define IQS7222_SYS_SETUP_ACK_RESET BIT(0) + +#define IQS7222_EVENT_MASK_ATI BIT(12) + +#define IQS7222_COMMS_HOLD BIT(0) +#define IQS7222_COMMS_ERROR 0xEEEE +#define IQS7222_COMMS_RETRY_MS 50 +#define IQS7222_COMMS_TIMEOUT_MS 100 +#define IQS7222_RESET_TIMEOUT_MS 250 +#define IQS7222_ATI_TIMEOUT_MS 2000 + +#define IQS7222_MAX_COLS_STAT 8 +#define IQS7222_MAX_COLS_CYCLE 3 +#define IQS7222_MAX_COLS_GLBL 3 +#define IQS7222_MAX_COLS_BTN 3 +#define IQS7222_MAX_COLS_CHAN 6 +#define IQS7222_MAX_COLS_FILT 2 +#define IQS7222_MAX_COLS_SLDR 11 +#define IQS7222_MAX_COLS_GPIO 3 +#define IQS7222_MAX_COLS_SYS 13 + +#define IQS7222_MAX_CHAN 20 +#define IQS7222_MAX_SLDR 2 + +#define IQS7222_NUM_RETRIES 5 +#define IQS7222_REG_OFFSET 0x100 + +enum iqs7222_reg_key_id { + IQS7222_REG_KEY_NONE, + IQS7222_REG_KEY_PROX, + IQS7222_REG_KEY_TOUCH, + IQS7222_REG_KEY_DEBOUNCE, + IQS7222_REG_KEY_TAP, + IQS7222_REG_KEY_AXIAL, + IQS7222_REG_KEY_WHEEL, + IQS7222_REG_KEY_NO_WHEEL, + IQS7222_REG_KEY_RESERVED +}; + +enum iqs7222_reg_grp_id { + IQS7222_REG_GRP_STAT, + IQS7222_REG_GRP_CYCLE, + IQS7222_REG_GRP_GLBL, + IQS7222_REG_GRP_BTN, + IQS7222_REG_GRP_CHAN, + IQS7222_REG_GRP_FILT, + IQS7222_REG_GRP_SLDR, + IQS7222_REG_GRP_GPIO, + IQS7222_REG_GRP_SYS, + IQS7222_NUM_REG_GRPS +}; + +static const char * const iqs7222_reg_grp_names[] = { + [IQS7222_REG_GRP_CYCLE] = "cycle", + [IQS7222_REG_GRP_CHAN] = "channel", + [IQS7222_REG_GRP_SLDR] = "slider", + [IQS7222_REG_GRP_GPIO] = "gpio", +}; + +static const unsigned int iqs7222_max_cols[] = { + [IQS7222_REG_GRP_STAT] = IQS7222_MAX_COLS_STAT, + [IQS7222_REG_GRP_CYCLE] = IQS7222_MAX_COLS_CYCLE, + [IQS7222_REG_GRP_GLBL] = IQS7222_MAX_COLS_GLBL, + [IQS7222_REG_GRP_BTN] = IQS7222_MAX_COLS_BTN, + [IQS7222_REG_GRP_CHAN] = IQS7222_MAX_COLS_CHAN, + [IQS7222_REG_GRP_FILT] = IQS7222_MAX_COLS_FILT, + [IQS7222_REG_GRP_SLDR] = IQS7222_MAX_COLS_SLDR, + [IQS7222_REG_GRP_GPIO] = IQS7222_MAX_COLS_GPIO, + [IQS7222_REG_GRP_SYS] = IQS7222_MAX_COLS_SYS, +}; + +static const unsigned int iqs7222_gpio_links[] = { 2, 5, 6, }; + +struct iqs7222_event_desc { + const char *name; + u16 mask; + u16 val; + u16 enable; + enum iqs7222_reg_key_id reg_key; +}; + +static const struct iqs7222_event_desc iqs7222_kp_events[] = { + { + .name = "event-prox", + .enable = BIT(0), + .reg_key = IQS7222_REG_KEY_PROX, + }, + { + .name = "event-touch", + .enable = BIT(1), + .reg_key = IQS7222_REG_KEY_TOUCH, + }, +}; + +static const struct iqs7222_event_desc iqs7222_sl_events[] = { + { .name = "event-press", }, + { + .name = "event-tap", + .mask = BIT(0), + .val = BIT(0), + .enable = BIT(0), + .reg_key = IQS7222_REG_KEY_TAP, + }, + { + .name = "event-swipe-pos", + .mask = BIT(5) | BIT(1), + .val = BIT(1), + .enable = BIT(1), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, + { + .name = "event-swipe-neg", + .mask = BIT(5) | BIT(1), + .val = BIT(5) | BIT(1), + .enable = BIT(1), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, + { + .name = "event-flick-pos", + .mask = BIT(5) | BIT(2), + .val = BIT(2), + .enable = BIT(2), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, + { + .name = "event-flick-neg", + .mask = BIT(5) | BIT(2), + .val = BIT(5) | BIT(2), + .enable = BIT(2), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, +}; + +struct iqs7222_reg_grp_desc { + u16 base; + int num_row; + int num_col; +}; + +struct iqs7222_dev_desc { + u16 prod_num; + u16 fw_major; + u16 fw_minor; + u16 sldr_res; + u16 touch_link; + u16 wheel_enable; + int allow_offset; + int event_offset; + int comms_offset; + struct iqs7222_reg_grp_desc reg_grps[IQS7222_NUM_REG_GRPS]; +}; + +static const struct iqs7222_dev_desc iqs7222_devs[] = { + { + .prod_num = IQS7222_PROD_NUM_A, + .fw_major = 1, + .fw_minor = 12, + .sldr_res = U8_MAX * 16, + .touch_link = 1768, + .allow_offset = 9, + .event_offset = 10, + .comms_offset = 12, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 8, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 7, + .num_col = 3, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8700, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 12, + .num_col = 3, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xA000, + .num_row = 12, + .num_col = 6, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xAC00, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SLDR] = { + .base = 0xB000, + .num_row = 2, + .num_col = 11, + }, + [IQS7222_REG_GRP_GPIO] = { + .base = 0xC000, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 13, + }, + }, + }, + { + .prod_num = IQS7222_PROD_NUM_B, + .fw_major = 1, + .fw_minor = 43, + .event_offset = 10, + .comms_offset = 11, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 6, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 10, + .num_col = 2, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8A00, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 20, + .num_col = 2, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xB000, + .num_row = 20, + .num_col = 4, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xC400, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 13, + }, + }, + }, + { + .prod_num = IQS7222_PROD_NUM_B, + .fw_major = 1, + .fw_minor = 27, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 6, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 10, + .num_col = 2, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8A00, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 20, + .num_col = 2, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xB000, + .num_row = 20, + .num_col = 4, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xC400, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 10, + }, + }, + }, + { + .prod_num = IQS7222_PROD_NUM_C, + .fw_major = 2, + .fw_minor = 6, + .sldr_res = U16_MAX, + .touch_link = 1686, + .wheel_enable = BIT(3), + .event_offset = 9, + .comms_offset = 10, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 6, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 5, + .num_col = 3, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8500, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 10, + .num_col = 3, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xA000, + .num_row = 10, + .num_col = 6, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xAA00, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SLDR] = { + .base = 0xB000, + .num_row = 2, + .num_col = 10, + }, + [IQS7222_REG_GRP_GPIO] = { + .base = 0xC000, + .num_row = 3, + .num_col = 3, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 12, + }, + }, + }, + { + .prod_num = IQS7222_PROD_NUM_C, + .fw_major = 1, + .fw_minor = 13, + .sldr_res = U16_MAX, + .touch_link = 1674, + .wheel_enable = BIT(3), + .event_offset = 9, + .comms_offset = 10, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 6, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 5, + .num_col = 3, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8500, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 10, + .num_col = 3, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xA000, + .num_row = 10, + .num_col = 6, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xAA00, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SLDR] = { + .base = 0xB000, + .num_row = 2, + .num_col = 10, + }, + [IQS7222_REG_GRP_GPIO] = { + .base = 0xC000, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 11, + }, + }, + }, +}; + +struct iqs7222_prop_desc { + const char *name; + enum iqs7222_reg_grp_id reg_grp; + enum iqs7222_reg_key_id reg_key; + int reg_offset; + int reg_shift; + int reg_width; + int val_pitch; + int val_min; + int val_max; + bool invert; + const char *label; +}; + +static const struct iqs7222_prop_desc iqs7222_props[] = { + { + .name = "azoteq,conv-period", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 8, + .label = "conversion period", + }, + { + .name = "azoteq,conv-frac", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 8, + .label = "conversion frequency fractional divider", + }, + { + .name = "azoteq,rx-float-inactive", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 6, + .reg_width = 1, + .invert = true, + }, + { + .name = "azoteq,dead-time-enable", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 5, + .reg_width = 1, + }, + { + .name = "azoteq,tx-freq-fosc", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 4, + .reg_width = 1, + }, + { + .name = "azoteq,vbias-enable", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 3, + .reg_width = 1, + }, + { + .name = "azoteq,sense-mode", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 3, + .val_max = 3, + .label = "sensing mode", + }, + { + .name = "azoteq,iref-enable", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 2, + .reg_shift = 10, + .reg_width = 1, + }, + { + .name = "azoteq,iref-level", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 2, + .reg_shift = 4, + .reg_width = 4, + .label = "current reference level", + }, + { + .name = "azoteq,iref-trim", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 4, + .label = "current reference trim", + }, + { + .name = "azoteq,rf-filt-enable", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 0, + .reg_shift = 15, + .reg_width = 1, + }, + { + .name = "azoteq,max-counts", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 0, + .reg_shift = 13, + .reg_width = 2, + .label = "maximum counts", + }, + { + .name = "azoteq,auto-mode", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 0, + .reg_shift = 2, + .reg_width = 2, + .label = "number of conversions", + }, + { + .name = "azoteq,ati-frac-div-fine", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 1, + .reg_shift = 9, + .reg_width = 5, + .label = "ATI fine fractional divider", + }, + { + .name = "azoteq,ati-frac-div-coarse", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 5, + .label = "ATI coarse fractional divider", + }, + { + .name = "azoteq,ati-comp-select", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 10, + .label = "ATI compensation selection", + }, + { + .name = "azoteq,ati-band", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 12, + .reg_width = 2, + .label = "ATI band", + }, + { + .name = "azoteq,global-halt", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 11, + .reg_width = 1, + }, + { + .name = "azoteq,invert-enable", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 10, + .reg_width = 1, + }, + { + .name = "azoteq,dual-direction", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 9, + .reg_width = 1, + }, + { + .name = "azoteq,samp-cap-double", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 3, + .reg_width = 1, + }, + { + .name = "azoteq,vref-half", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 2, + .reg_width = 1, + }, + { + .name = "azoteq,proj-bias", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 2, + .label = "projected bias current", + }, + { + .name = "azoteq,ati-target", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 1, + .reg_shift = 8, + .reg_width = 8, + .val_pitch = 8, + .label = "ATI target", + }, + { + .name = "azoteq,ati-base", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 1, + .reg_shift = 3, + .reg_width = 5, + .val_pitch = 16, + .label = "ATI base", + }, + { + .name = "azoteq,ati-mode", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 3, + .val_max = 5, + .label = "ATI mode", + }, + { + .name = "azoteq,ati-frac-div-fine", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 2, + .reg_shift = 9, + .reg_width = 5, + .label = "ATI fine fractional divider", + }, + { + .name = "azoteq,ati-frac-mult-coarse", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 2, + .reg_shift = 5, + .reg_width = 4, + .label = "ATI coarse fractional multiplier", + }, + { + .name = "azoteq,ati-frac-div-coarse", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 5, + .label = "ATI coarse fractional divider", + }, + { + .name = "azoteq,ati-comp-div", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 3, + .reg_shift = 11, + .reg_width = 5, + .label = "ATI compensation divider", + }, + { + .name = "azoteq,ati-comp-select", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 3, + .reg_shift = 0, + .reg_width = 10, + .label = "ATI compensation selection", + }, + { + .name = "azoteq,debounce-exit", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_DEBOUNCE, + .reg_offset = 0, + .reg_shift = 12, + .reg_width = 4, + .label = "debounce exit factor", + }, + { + .name = "azoteq,debounce-enter", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_DEBOUNCE, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 4, + .label = "debounce entrance factor", + }, + { + .name = "azoteq,thresh", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_PROX, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 8, + .val_max = 127, + .label = "threshold", + }, + { + .name = "azoteq,thresh", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_TOUCH, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 8, + .label = "threshold", + }, + { + .name = "azoteq,hyst", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_TOUCH, + .reg_offset = 1, + .reg_shift = 8, + .reg_width = 8, + .label = "hysteresis", + }, + { + .name = "azoteq,lta-beta-lp", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 12, + .reg_width = 4, + .label = "low-power mode long-term average beta", + }, + { + .name = "azoteq,lta-beta-np", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 4, + .label = "normal-power mode long-term average beta", + }, + { + .name = "azoteq,counts-beta-lp", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 4, + .reg_width = 4, + .label = "low-power mode counts beta", + }, + { + .name = "azoteq,counts-beta-np", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 4, + .label = "normal-power mode counts beta", + }, + { + .name = "azoteq,lta-fast-beta-lp", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 1, + .reg_shift = 4, + .reg_width = 4, + .label = "low-power mode long-term average fast beta", + }, + { + .name = "azoteq,lta-fast-beta-np", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 4, + .label = "normal-power mode long-term average fast beta", + }, + { + .name = "azoteq,lower-cal", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 8, + .label = "lower calibration", + }, + { + .name = "azoteq,static-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_NO_WHEEL, + .reg_offset = 0, + .reg_shift = 6, + .reg_width = 1, + }, + { + .name = "azoteq,bottom-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_NO_WHEEL, + .reg_offset = 0, + .reg_shift = 3, + .reg_width = 3, + .label = "bottom beta", + }, + { + .name = "azoteq,static-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_WHEEL, + .reg_offset = 0, + .reg_shift = 7, + .reg_width = 1, + }, + { + .name = "azoteq,bottom-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_WHEEL, + .reg_offset = 0, + .reg_shift = 4, + .reg_width = 3, + .label = "bottom beta", + }, + { + .name = "azoteq,bottom-speed", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_offset = 1, + .reg_shift = 8, + .reg_width = 8, + .label = "bottom speed", + }, + { + .name = "azoteq,upper-cal", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 8, + .label = "upper calibration", + }, + { + .name = "azoteq,gesture-max-ms", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_TAP, + .reg_offset = 9, + .reg_shift = 8, + .reg_width = 8, + .val_pitch = 4, + .label = "maximum gesture time", + }, + { + .name = "azoteq,gesture-min-ms", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_TAP, + .reg_offset = 9, + .reg_shift = 3, + .reg_width = 5, + .val_pitch = 4, + .label = "minimum gesture time", + }, + { + .name = "azoteq,gesture-dist", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_AXIAL, + .reg_offset = 10, + .reg_shift = 8, + .reg_width = 8, + .val_pitch = 16, + .label = "gesture distance", + }, + { + .name = "azoteq,gesture-max-ms", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_AXIAL, + .reg_offset = 10, + .reg_shift = 0, + .reg_width = 8, + .val_pitch = 4, + .label = "maximum gesture time", + }, + { + .name = "drive-open-drain", + .reg_grp = IQS7222_REG_GRP_GPIO, + .reg_offset = 0, + .reg_shift = 1, + .reg_width = 1, + }, + { + .name = "azoteq,timeout-ati-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 16, + .val_pitch = 500, + .label = "ATI error timeout", + }, + { + .name = "azoteq,rate-ati-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 16, + .label = "ATI report rate", + }, + { + .name = "azoteq,timeout-np-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 3, + .reg_shift = 0, + .reg_width = 16, + .label = "normal-power mode timeout", + }, + { + .name = "azoteq,rate-np-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 4, + .reg_shift = 0, + .reg_width = 16, + .val_max = 3000, + .label = "normal-power mode report rate", + }, + { + .name = "azoteq,timeout-lp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 5, + .reg_shift = 0, + .reg_width = 16, + .label = "low-power mode timeout", + }, + { + .name = "azoteq,rate-lp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 6, + .reg_shift = 0, + .reg_width = 16, + .val_max = 3000, + .label = "low-power mode report rate", + }, + { + .name = "azoteq,timeout-ulp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 7, + .reg_shift = 0, + .reg_width = 16, + .label = "ultra-low-power mode timeout", + }, + { + .name = "azoteq,rate-ulp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 8, + .reg_shift = 0, + .reg_width = 16, + .val_max = 3000, + .label = "ultra-low-power mode report rate", + }, +}; + +struct iqs7222_private { + const struct iqs7222_dev_desc *dev_desc; + struct gpio_desc *reset_gpio; + struct gpio_desc *irq_gpio; + struct i2c_client *client; + struct input_dev *keypad; + unsigned int kp_type[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)]; + unsigned int kp_code[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)]; + unsigned int sl_code[IQS7222_MAX_SLDR][ARRAY_SIZE(iqs7222_sl_events)]; + unsigned int sl_axis[IQS7222_MAX_SLDR]; + u16 cycle_setup[IQS7222_MAX_CHAN / 2][IQS7222_MAX_COLS_CYCLE]; + u16 glbl_setup[IQS7222_MAX_COLS_GLBL]; + u16 btn_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_BTN]; + u16 chan_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_CHAN]; + u16 filt_setup[IQS7222_MAX_COLS_FILT]; + u16 sldr_setup[IQS7222_MAX_SLDR][IQS7222_MAX_COLS_SLDR]; + u16 gpio_setup[ARRAY_SIZE(iqs7222_gpio_links)][IQS7222_MAX_COLS_GPIO]; + u16 sys_setup[IQS7222_MAX_COLS_SYS]; +}; + +static u16 *iqs7222_setup(struct iqs7222_private *iqs7222, + enum iqs7222_reg_grp_id reg_grp, int row) +{ + switch (reg_grp) { + case IQS7222_REG_GRP_CYCLE: + return iqs7222->cycle_setup[row]; + + case IQS7222_REG_GRP_GLBL: + return iqs7222->glbl_setup; + + case IQS7222_REG_GRP_BTN: + return iqs7222->btn_setup[row]; + + case IQS7222_REG_GRP_CHAN: + return iqs7222->chan_setup[row]; + + case IQS7222_REG_GRP_FILT: + return iqs7222->filt_setup; + + case IQS7222_REG_GRP_SLDR: + return iqs7222->sldr_setup[row]; + + case IQS7222_REG_GRP_GPIO: + return iqs7222->gpio_setup[row]; + + case IQS7222_REG_GRP_SYS: + return iqs7222->sys_setup; + + default: + return NULL; + } +} + +static int iqs7222_irq_poll(struct iqs7222_private *iqs7222, u16 timeout_ms) +{ + ktime_t irq_timeout = ktime_add_ms(ktime_get(), timeout_ms); + int ret; + + do { + usleep_range(1000, 1100); + + ret = gpiod_get_value_cansleep(iqs7222->irq_gpio); + if (ret < 0) + return ret; + else if (ret > 0) + return 0; + } while (ktime_compare(ktime_get(), irq_timeout) < 0); + + return -EBUSY; +} + +static int iqs7222_hard_reset(struct iqs7222_private *iqs7222) +{ + struct i2c_client *client = iqs7222->client; + int error; + + if (!iqs7222->reset_gpio) + return 0; + + gpiod_set_value_cansleep(iqs7222->reset_gpio, 1); + usleep_range(1000, 1100); + + gpiod_set_value_cansleep(iqs7222->reset_gpio, 0); + + error = iqs7222_irq_poll(iqs7222, IQS7222_RESET_TIMEOUT_MS); + if (error) + dev_err(&client->dev, "Failed to reset device: %d\n", error); + + return error; +} + +static int iqs7222_force_comms(struct iqs7222_private *iqs7222) +{ + u8 msg_buf[] = { 0xFF, 0x00, }; + int ret; + + /* + * The device cannot communicate until it asserts its interrupt (RDY) + * pin. Attempts to do so while RDY is deasserted return an ACK; how- + * ever all write data is ignored, and all read data returns 0xEE. + * + * Unsolicited communication must be preceded by a special force com- + * munication command, after which the device eventually asserts its + * RDY pin and agrees to communicate. + * + * Regardless of whether communication is forced or the result of an + * interrupt, the device automatically deasserts its RDY pin once it + * detects an I2C stop condition, or a timeout expires. + */ + ret = gpiod_get_value_cansleep(iqs7222->irq_gpio); + if (ret < 0) + return ret; + else if (ret > 0) + return 0; + + ret = i2c_master_send(iqs7222->client, msg_buf, sizeof(msg_buf)); + if (ret < (int)sizeof(msg_buf)) { + if (ret >= 0) + ret = -EIO; + + /* + * The datasheet states that the host must wait to retry any + * failed attempt to communicate over I2C. + */ + msleep(IQS7222_COMMS_RETRY_MS); + return ret; + } + + return iqs7222_irq_poll(iqs7222, IQS7222_COMMS_TIMEOUT_MS); +} + +static int iqs7222_read_burst(struct iqs7222_private *iqs7222, + u16 reg, void *val, u16 num_val) +{ + u8 reg_buf[sizeof(__be16)]; + int ret, i; + struct i2c_client *client = iqs7222->client; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = reg > U8_MAX ? sizeof(reg) : sizeof(u8), + .buf = reg_buf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = num_val * sizeof(__le16), + .buf = (u8 *)val, + }, + }; + + if (reg > U8_MAX) + put_unaligned_be16(reg, reg_buf); + else + *reg_buf = (u8)reg; + + /* + * The following loop protects against an edge case in which the RDY + * pin is automatically deasserted just as the read is initiated. In + * that case, the read must be retried using forced communication. + */ + for (i = 0; i < IQS7222_NUM_RETRIES; i++) { + ret = iqs7222_force_comms(iqs7222); + if (ret < 0) + continue; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret < (int)ARRAY_SIZE(msg)) { + if (ret >= 0) + ret = -EIO; + + msleep(IQS7222_COMMS_RETRY_MS); + continue; + } + + if (get_unaligned_le16(msg[1].buf) == IQS7222_COMMS_ERROR) { + ret = -ENODATA; + continue; + } + + ret = 0; + break; + } + + /* + * The following delay ensures the device has deasserted the RDY pin + * following the I2C stop condition. + */ + usleep_range(50, 100); + + if (ret < 0) + dev_err(&client->dev, + "Failed to read from address 0x%04X: %d\n", reg, ret); + + return ret; +} + +static int iqs7222_read_word(struct iqs7222_private *iqs7222, u16 reg, u16 *val) +{ + __le16 val_buf; + int error; + + error = iqs7222_read_burst(iqs7222, reg, &val_buf, 1); + if (error) + return error; + + *val = le16_to_cpu(val_buf); + + return 0; +} + +static int iqs7222_write_burst(struct iqs7222_private *iqs7222, + u16 reg, const void *val, u16 num_val) +{ + int reg_len = reg > U8_MAX ? sizeof(reg) : sizeof(u8); + int val_len = num_val * sizeof(__le16); + int msg_len = reg_len + val_len; + int ret, i; + struct i2c_client *client = iqs7222->client; + u8 *msg_buf; + + msg_buf = kzalloc(msg_len, GFP_KERNEL); + if (!msg_buf) + return -ENOMEM; + + if (reg > U8_MAX) + put_unaligned_be16(reg, msg_buf); + else + *msg_buf = (u8)reg; + + memcpy(msg_buf + reg_len, val, val_len); + + /* + * The following loop protects against an edge case in which the RDY + * pin is automatically asserted just before the force communication + * command is sent. + * + * In that case, the subsequent I2C stop condition tricks the device + * into preemptively deasserting the RDY pin and the command must be + * sent again. + */ + for (i = 0; i < IQS7222_NUM_RETRIES; i++) { + ret = iqs7222_force_comms(iqs7222); + if (ret < 0) + continue; + + ret = i2c_master_send(client, msg_buf, msg_len); + if (ret < msg_len) { + if (ret >= 0) + ret = -EIO; + + msleep(IQS7222_COMMS_RETRY_MS); + continue; + } + + ret = 0; + break; + } + + kfree(msg_buf); + + usleep_range(50, 100); + + if (ret < 0) + dev_err(&client->dev, + "Failed to write to address 0x%04X: %d\n", reg, ret); + + return ret; +} + +static int iqs7222_write_word(struct iqs7222_private *iqs7222, u16 reg, u16 val) +{ + __le16 val_buf = cpu_to_le16(val); + + return iqs7222_write_burst(iqs7222, reg, &val_buf, 1); +} + +static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222) +{ + struct i2c_client *client = iqs7222->client; + ktime_t ati_timeout; + u16 sys_status = 0; + u16 sys_setup = iqs7222->sys_setup[0] & ~IQS7222_SYS_SETUP_ACK_RESET; + int error, i; + + for (i = 0; i < IQS7222_NUM_RETRIES; i++) { + /* + * Trigger ATI from streaming and normal-power modes so that + * the RDY pin continues to be asserted during ATI. + */ + error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP, + sys_setup | + IQS7222_SYS_SETUP_REDO_ATI); + if (error) + return error; + + ati_timeout = ktime_add_ms(ktime_get(), IQS7222_ATI_TIMEOUT_MS); + + do { + error = iqs7222_irq_poll(iqs7222, + IQS7222_COMMS_TIMEOUT_MS); + if (error) + continue; + + error = iqs7222_read_word(iqs7222, IQS7222_SYS_STATUS, + &sys_status); + if (error) + return error; + + if (sys_status & IQS7222_SYS_STATUS_ATI_ACTIVE) + continue; + + if (sys_status & IQS7222_SYS_STATUS_ATI_ERROR) + break; + + /* + * Use stream-in-touch mode if either slider reports + * absolute position. + */ + sys_setup |= test_bit(EV_ABS, iqs7222->keypad->evbit) + ? IQS7222_SYS_SETUP_INTF_MODE_TOUCH + : IQS7222_SYS_SETUP_INTF_MODE_EVENT; + sys_setup |= IQS7222_SYS_SETUP_PWR_MODE_AUTO; + + return iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP, + sys_setup); + } while (ktime_compare(ktime_get(), ati_timeout) < 0); + + dev_err(&client->dev, + "ATI attempt %d of %d failed with status 0x%02X, %s\n", + i + 1, IQS7222_NUM_RETRIES, (u8)sys_status, + i < IQS7222_NUM_RETRIES ? "retrying..." : "stopping"); + } + + return -ETIMEDOUT; +} + +static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + int comms_offset = dev_desc->comms_offset; + int error, i, j, k; + + /* + * Take advantage of the stop-bit disable function, if available, to + * save the trouble of having to reopen a communication window after + * each burst read or write. + */ + if (comms_offset) { + u16 comms_setup; + + error = iqs7222_read_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + &comms_setup); + if (error) + return error; + + error = iqs7222_write_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + comms_setup | IQS7222_COMMS_HOLD); + if (error) + return error; + } + + for (i = 0; i < IQS7222_NUM_REG_GRPS; i++) { + int num_row = dev_desc->reg_grps[i].num_row; + int num_col = dev_desc->reg_grps[i].num_col; + u16 reg = dev_desc->reg_grps[i].base; + __le16 *val_buf; + u16 *val; + + if (!num_col) + continue; + + val = iqs7222_setup(iqs7222, i, 0); + if (!val) + continue; + + val_buf = kcalloc(num_col, sizeof(__le16), GFP_KERNEL); + if (!val_buf) + return -ENOMEM; + + for (j = 0; j < num_row; j++) { + switch (dir) { + case READ: + error = iqs7222_read_burst(iqs7222, reg, + val_buf, num_col); + for (k = 0; k < num_col; k++) + val[k] = le16_to_cpu(val_buf[k]); + break; + + case WRITE: + for (k = 0; k < num_col; k++) + val_buf[k] = cpu_to_le16(val[k]); + error = iqs7222_write_burst(iqs7222, reg, + val_buf, num_col); + break; + + default: + error = -EINVAL; + } + + if (error) + break; + + reg += IQS7222_REG_OFFSET; + val += iqs7222_max_cols[i]; + } + + kfree(val_buf); + + if (error) + return error; + } + + if (comms_offset) { + u16 comms_setup; + + error = iqs7222_read_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + &comms_setup); + if (error) + return error; + + error = iqs7222_write_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + comms_setup & ~IQS7222_COMMS_HOLD); + if (error) + return error; + } + + if (dir == READ) + return 0; + + return iqs7222_ati_trigger(iqs7222); +} + +static int iqs7222_dev_info(struct iqs7222_private *iqs7222) +{ + struct i2c_client *client = iqs7222->client; + bool prod_num_valid = false; + __le16 dev_id[3]; + int error, i; + + error = iqs7222_read_burst(iqs7222, IQS7222_PROD_NUM, dev_id, + ARRAY_SIZE(dev_id)); + if (error) + return error; + + for (i = 0; i < ARRAY_SIZE(iqs7222_devs); i++) { + if (le16_to_cpu(dev_id[0]) != iqs7222_devs[i].prod_num) + continue; + + prod_num_valid = true; + + if (le16_to_cpu(dev_id[1]) < iqs7222_devs[i].fw_major) + continue; + + if (le16_to_cpu(dev_id[2]) < iqs7222_devs[i].fw_minor) + continue; + + iqs7222->dev_desc = &iqs7222_devs[i]; + return 0; + } + + if (prod_num_valid) + dev_err(&client->dev, "Unsupported firmware revision: %u.%u\n", + le16_to_cpu(dev_id[1]), le16_to_cpu(dev_id[2])); + else + dev_err(&client->dev, "Unrecognized product number: %u\n", + le16_to_cpu(dev_id[0])); + + return -EINVAL; +} + +static int iqs7222_gpio_select(struct iqs7222_private *iqs7222, + struct fwnode_handle *child_node, + int child_enable, u16 child_link) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + int num_gpio = dev_desc->reg_grps[IQS7222_REG_GRP_GPIO].num_row; + int error, count, i; + unsigned int gpio_sel[ARRAY_SIZE(iqs7222_gpio_links)]; + + if (!num_gpio) + return 0; + + if (!fwnode_property_present(child_node, "azoteq,gpio-select")) + return 0; + + count = fwnode_property_count_u32(child_node, "azoteq,gpio-select"); + if (count > num_gpio) { + dev_err(&client->dev, "Invalid number of %s GPIOs\n", + fwnode_get_name(child_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count %s GPIOs: %d\n", + fwnode_get_name(child_node), count); + return count; + } + + error = fwnode_property_read_u32_array(child_node, + "azoteq,gpio-select", + gpio_sel, count); + if (error) { + dev_err(&client->dev, "Failed to read %s GPIOs: %d\n", + fwnode_get_name(child_node), error); + return error; + } + + for (i = 0; i < count; i++) { + u16 *gpio_setup; + + if (gpio_sel[i] >= num_gpio) { + dev_err(&client->dev, "Invalid %s GPIO: %u\n", + fwnode_get_name(child_node), gpio_sel[i]); + return -EINVAL; + } + + gpio_setup = iqs7222->gpio_setup[gpio_sel[i]]; + + if (gpio_setup[2] && child_link != gpio_setup[2]) { + dev_err(&client->dev, + "Conflicting GPIO %u event types\n", + gpio_sel[i]); + return -EINVAL; + } + + gpio_setup[0] |= IQS7222_GPIO_SETUP_0_GPIO_EN; + gpio_setup[1] |= child_enable; + gpio_setup[2] = child_link; + } + + return 0; +} + +static int iqs7222_parse_props(struct iqs7222_private *iqs7222, + struct fwnode_handle **child_node, + int child_index, + enum iqs7222_reg_grp_id reg_grp, + enum iqs7222_reg_key_id reg_key) +{ + u16 *setup = iqs7222_setup(iqs7222, reg_grp, child_index); + struct fwnode_handle *reg_grp_node = *child_node; + struct i2c_client *client = iqs7222->client; + char reg_grp_name[16]; + int i; + + switch (reg_grp) { + case IQS7222_REG_GRP_CYCLE: + case IQS7222_REG_GRP_CHAN: + case IQS7222_REG_GRP_SLDR: + case IQS7222_REG_GRP_GPIO: + case IQS7222_REG_GRP_BTN: + /* + * These groups derive a child node and return it to the caller + * for additional group-specific processing. In some cases, the + * child node may have already been derived. + */ + if (*child_node) + break; + + snprintf(reg_grp_name, sizeof(reg_grp_name), "%s-%d", + iqs7222_reg_grp_names[reg_grp], child_index); + + reg_grp_node = device_get_named_child_node(&client->dev, + reg_grp_name); + if (!reg_grp_node) + return 0; + + *child_node = reg_grp_node; + break; + + case IQS7222_REG_GRP_GLBL: + case IQS7222_REG_GRP_FILT: + case IQS7222_REG_GRP_SYS: + /* + * These groups are not organized beneath a child node, nor are + * they subject to any additional processing by the caller. + */ + reg_grp_node = dev_fwnode(&client->dev); + break; + + default: + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(iqs7222_props); i++) { + const char *name = iqs7222_props[i].name; + int reg_offset = iqs7222_props[i].reg_offset; + int reg_shift = iqs7222_props[i].reg_shift; + int reg_width = iqs7222_props[i].reg_width; + int val_pitch = iqs7222_props[i].val_pitch ? : 1; + int val_min = iqs7222_props[i].val_min; + int val_max = iqs7222_props[i].val_max; + bool invert = iqs7222_props[i].invert; + const char *label = iqs7222_props[i].label ? : name; + unsigned int val; + int error; + + if (iqs7222_props[i].reg_grp != reg_grp || + iqs7222_props[i].reg_key != reg_key) + continue; + + /* + * Boolean register fields are one bit wide; they are forcibly + * reset to provide a means to undo changes by a bootloader if + * necessary. + * + * Scalar fields, on the other hand, are left untouched unless + * their corresponding properties are present. + */ + if (reg_width == 1) { + if (invert) + setup[reg_offset] |= BIT(reg_shift); + else + setup[reg_offset] &= ~BIT(reg_shift); + } + + if (!fwnode_property_present(reg_grp_node, name)) + continue; + + if (reg_width == 1) { + if (invert) + setup[reg_offset] &= ~BIT(reg_shift); + else + setup[reg_offset] |= BIT(reg_shift); + + continue; + } + + error = fwnode_property_read_u32(reg_grp_node, name, &val); + if (error) { + dev_err(&client->dev, "Failed to read %s %s: %d\n", + fwnode_get_name(reg_grp_node), label, error); + return error; + } + + if (!val_max) + val_max = GENMASK(reg_width - 1, 0) * val_pitch; + + if (val < val_min || val > val_max) { + dev_err(&client->dev, "Invalid %s %s: %u\n", + fwnode_get_name(reg_grp_node), label, val); + return -EINVAL; + } + + setup[reg_offset] &= ~GENMASK(reg_shift + reg_width - 1, + reg_shift); + setup[reg_offset] |= (val / val_pitch << reg_shift); + } + + return 0; +} + +static int iqs7222_parse_cycle(struct iqs7222_private *iqs7222, int cycle_index) +{ + u16 *cycle_setup = iqs7222->cycle_setup[cycle_index]; + struct i2c_client *client = iqs7222->client; + struct fwnode_handle *cycle_node = NULL; + unsigned int pins[9]; + int error, count, i; + + /* + * Each channel shares a cycle with one other channel; the mapping of + * channels to cycles is fixed. Properties defined for a cycle impact + * both channels tied to the cycle. + */ + error = iqs7222_parse_props(iqs7222, &cycle_node, cycle_index, + IQS7222_REG_GRP_CYCLE, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (!cycle_node) + return 0; + + /* + * Unlike channels which are restricted to a select range of CRx pins + * based on channel number, any cycle can claim any of the device's 9 + * CTx pins (CTx0-8). + */ + if (!fwnode_property_present(cycle_node, "azoteq,tx-enable")) + return 0; + + count = fwnode_property_count_u32(cycle_node, "azoteq,tx-enable"); + if (count > ARRAY_SIZE(pins)) { + dev_err(&client->dev, "Invalid number of %s CTx pins\n", + fwnode_get_name(cycle_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count %s CTx pins: %d\n", + fwnode_get_name(cycle_node), count); + return count; + } + + error = fwnode_property_read_u32_array(cycle_node, "azoteq,tx-enable", + pins, count); + if (error) { + dev_err(&client->dev, "Failed to read %s CTx pins: %d\n", + fwnode_get_name(cycle_node), error); + return error; + } + + cycle_setup[1] &= ~GENMASK(7 + ARRAY_SIZE(pins) - 1, 7); + + for (i = 0; i < count; i++) { + if (pins[i] > 8) { + dev_err(&client->dev, "Invalid %s CTx pin: %u\n", + fwnode_get_name(cycle_node), pins[i]); + return -EINVAL; + } + + cycle_setup[1] |= BIT(pins[i] + 7); + } + + return 0; +} + +static int iqs7222_parse_chan(struct iqs7222_private *iqs7222, int chan_index) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + struct fwnode_handle *chan_node = NULL; + int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row; + int ext_chan = rounddown(num_chan, 10); + int error, i; + u16 *chan_setup = iqs7222->chan_setup[chan_index]; + u16 *sys_setup = iqs7222->sys_setup; + unsigned int val; + + error = iqs7222_parse_props(iqs7222, &chan_node, chan_index, + IQS7222_REG_GRP_CHAN, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (!chan_node) + return 0; + + if (dev_desc->allow_offset) { + sys_setup[dev_desc->allow_offset] |= BIT(chan_index); + if (fwnode_property_present(chan_node, "azoteq,ulp-allow")) + sys_setup[dev_desc->allow_offset] &= ~BIT(chan_index); + } + + chan_setup[0] |= IQS7222_CHAN_SETUP_0_CHAN_EN; + + /* + * The reference channel function allows for differential measurements + * and is only available in the case of IQS7222A or IQS7222C. + */ + if (dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_col > 4 && + fwnode_property_present(chan_node, "azoteq,ref-select")) { + u16 *ref_setup; + + error = fwnode_property_read_u32(chan_node, "azoteq,ref-select", + &val); + if (error) { + dev_err(&client->dev, + "Failed to read %s reference channel: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + if (val >= ext_chan) { + dev_err(&client->dev, + "Invalid %s reference channel: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + ref_setup = iqs7222->chan_setup[val]; + + /* + * Configure the current channel as a follower of the selected + * reference channel. + */ + chan_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW; + chan_setup[4] = val * 42 + 1048; + + if (!fwnode_property_read_u32(chan_node, "azoteq,ref-weight", + &val)) { + if (val > U16_MAX) { + dev_err(&client->dev, + "Invalid %s reference weight: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + chan_setup[5] = val; + } + + /* + * Configure the selected channel as a reference channel which + * serves the current channel. + */ + ref_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_REF; + ref_setup[5] |= BIT(chan_index); + + ref_setup[4] = dev_desc->touch_link; + if (fwnode_property_present(chan_node, "azoteq,use-prox")) + ref_setup[4] -= 2; + } + + if (fwnode_property_present(chan_node, "azoteq,rx-enable")) { + /* + * Each channel can claim up to 4 CRx pins. The first half of + * the channels can use CRx0-3, while the second half can use + * CRx4-7. + */ + unsigned int pins[4]; + int count; + + count = fwnode_property_count_u32(chan_node, + "azoteq,rx-enable"); + if (count > ARRAY_SIZE(pins)) { + dev_err(&client->dev, + "Invalid number of %s CRx pins\n", + fwnode_get_name(chan_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, + "Failed to count %s CRx pins: %d\n", + fwnode_get_name(chan_node), count); + return count; + } + + error = fwnode_property_read_u32_array(chan_node, + "azoteq,rx-enable", + pins, count); + if (error) { + dev_err(&client->dev, + "Failed to read %s CRx pins: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + chan_setup[0] &= ~GENMASK(4 + ARRAY_SIZE(pins) - 1, 4); + + for (i = 0; i < count; i++) { + int min_crx = chan_index < ext_chan / 2 ? 0 : 4; + + if (pins[i] < min_crx || pins[i] > min_crx + 3) { + dev_err(&client->dev, + "Invalid %s CRx pin: %u\n", + fwnode_get_name(chan_node), pins[i]); + return -EINVAL; + } + + chan_setup[0] |= BIT(pins[i] + 4 - min_crx); + } + } + + for (i = 0; i < ARRAY_SIZE(iqs7222_kp_events); i++) { + const char *event_name = iqs7222_kp_events[i].name; + u16 event_enable = iqs7222_kp_events[i].enable; + struct fwnode_handle *event_node; + + event_node = fwnode_get_named_child_node(chan_node, event_name); + if (!event_node) + continue; + + error = iqs7222_parse_props(iqs7222, &event_node, chan_index, + IQS7222_REG_GRP_BTN, + iqs7222_kp_events[i].reg_key); + if (error) + return error; + + error = iqs7222_gpio_select(iqs7222, event_node, + BIT(chan_index), + dev_desc->touch_link - (i ? 0 : 2)); + if (error) + return error; + + if (!fwnode_property_read_u32(event_node, + "azoteq,timeout-press-ms", + &val)) { + /* + * The IQS7222B employs a global pair of press timeout + * registers as opposed to channel-specific registers. + */ + u16 *setup = dev_desc->reg_grps + [IQS7222_REG_GRP_BTN].num_col > 2 ? + &iqs7222->btn_setup[chan_index][2] : + &sys_setup[9]; + + if (val > U8_MAX * 500) { + dev_err(&client->dev, + "Invalid %s press timeout: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + *setup &= ~(U8_MAX << i * 8); + *setup |= (val / 500 << i * 8); + } + + error = fwnode_property_read_u32(event_node, "linux,code", + &val); + if (error) { + dev_err(&client->dev, "Failed to read %s code: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + iqs7222->kp_code[chan_index][i] = val; + iqs7222->kp_type[chan_index][i] = EV_KEY; + + if (fwnode_property_present(event_node, "linux,input-type")) { + error = fwnode_property_read_u32(event_node, + "linux,input-type", + &val); + if (error) { + dev_err(&client->dev, + "Failed to read %s input type: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + if (val != EV_KEY && val != EV_SW) { + dev_err(&client->dev, + "Invalid %s input type: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + iqs7222->kp_type[chan_index][i] = val; + } + + /* + * Reference channels can opt out of event reporting by using + * KEY_RESERVED in place of a true key or switch code. + */ + if (iqs7222->kp_type[chan_index][i] == EV_KEY && + iqs7222->kp_code[chan_index][i] == KEY_RESERVED) + continue; + + input_set_capability(iqs7222->keypad, + iqs7222->kp_type[chan_index][i], + iqs7222->kp_code[chan_index][i]); + + if (!dev_desc->event_offset) + continue; + + sys_setup[dev_desc->event_offset] |= event_enable; + } + + /* + * The following call handles a special pair of properties that apply + * to a channel node, but reside within the button (event) group. + */ + return iqs7222_parse_props(iqs7222, &chan_node, chan_index, + IQS7222_REG_GRP_BTN, + IQS7222_REG_KEY_DEBOUNCE); +} + +static int iqs7222_parse_sldr(struct iqs7222_private *iqs7222, int sldr_index) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + struct fwnode_handle *sldr_node = NULL; + int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row; + int ext_chan = rounddown(num_chan, 10); + int count, error, reg_offset, i; + u16 *sldr_setup = iqs7222->sldr_setup[sldr_index]; + u16 *sys_setup = iqs7222->sys_setup; + unsigned int chan_sel[4], val; + + error = iqs7222_parse_props(iqs7222, &sldr_node, sldr_index, + IQS7222_REG_GRP_SLDR, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (!sldr_node) + return 0; + + /* + * Each slider can be spread across 3 to 4 channels. It is possible to + * select only 2 channels, but doing so prevents the slider from using + * the specified resolution. + */ + count = fwnode_property_count_u32(sldr_node, "azoteq,channel-select"); + if (count < 3 || count > ARRAY_SIZE(chan_sel)) { + dev_err(&client->dev, "Invalid number of %s channels\n", + fwnode_get_name(sldr_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count %s channels: %d\n", + fwnode_get_name(sldr_node), count); + return count; + } + + error = fwnode_property_read_u32_array(sldr_node, + "azoteq,channel-select", + chan_sel, count); + if (error) { + dev_err(&client->dev, "Failed to read %s channels: %d\n", + fwnode_get_name(sldr_node), error); + return error; + } + + /* + * Resolution and top speed, if small enough, are packed into a single + * register. Otherwise, each occupies its own register and the rest of + * the slider-related register addresses are offset by one. + */ + reg_offset = dev_desc->sldr_res < U16_MAX ? 0 : 1; + + sldr_setup[0] |= count; + sldr_setup[3 + reg_offset] &= ~IQS7222_SLDR_SETUP_3_CHAN_SEL_MASK; + + for (i = 0; i < ARRAY_SIZE(chan_sel); i++) { + sldr_setup[5 + reg_offset + i] = 0; + if (i >= count) + continue; + + if (chan_sel[i] >= ext_chan) { + dev_err(&client->dev, "Invalid %s channel: %u\n", + fwnode_get_name(sldr_node), chan_sel[i]); + return -EINVAL; + } + + /* + * The following fields indicate which channels participate in + * the slider, as well as each channel's relative placement. + */ + sldr_setup[3 + reg_offset] |= BIT(chan_sel[i]); + sldr_setup[5 + reg_offset + i] = chan_sel[i] * 42 + 1080; + } + + sldr_setup[4 + reg_offset] = dev_desc->touch_link; + if (fwnode_property_present(sldr_node, "azoteq,use-prox")) + sldr_setup[4 + reg_offset] -= 2; + + if (!fwnode_property_read_u32(sldr_node, "azoteq,slider-size", &val)) { + if (!val || val > dev_desc->sldr_res) { + dev_err(&client->dev, "Invalid %s size: %u\n", + fwnode_get_name(sldr_node), val); + return -EINVAL; + } + + if (reg_offset) { + sldr_setup[3] = val; + } else { + sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_RES_MASK; + sldr_setup[2] |= (val / 16 << + IQS7222_SLDR_SETUP_2_RES_SHIFT); + } + } + + if (!fwnode_property_read_u32(sldr_node, "azoteq,top-speed", &val)) { + if (val > (reg_offset ? U16_MAX : U8_MAX * 4)) { + dev_err(&client->dev, "Invalid %s top speed: %u\n", + fwnode_get_name(sldr_node), val); + return -EINVAL; + } + + if (reg_offset) { + sldr_setup[2] = val; + } else { + sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK; + sldr_setup[2] |= (val / 4); + } + } + + if (!fwnode_property_read_u32(sldr_node, "linux,axis", &val)) { + u16 sldr_max = sldr_setup[3] - 1; + + if (!reg_offset) { + sldr_max = sldr_setup[2]; + + sldr_max &= IQS7222_SLDR_SETUP_2_RES_MASK; + sldr_max >>= IQS7222_SLDR_SETUP_2_RES_SHIFT; + + sldr_max = sldr_max * 16 - 1; + } + + input_set_abs_params(iqs7222->keypad, val, 0, sldr_max, 0, 0); + iqs7222->sl_axis[sldr_index] = val; + } + + if (dev_desc->wheel_enable) { + sldr_setup[0] &= ~dev_desc->wheel_enable; + if (iqs7222->sl_axis[sldr_index] == ABS_WHEEL) + sldr_setup[0] |= dev_desc->wheel_enable; + } + + for (i = 0; i < ARRAY_SIZE(iqs7222_sl_events); i++) { + const char *event_name = iqs7222_sl_events[i].name; + struct fwnode_handle *event_node; + + /* + * The absence of a register offset means the remaining fields + * in the group represent gesture settings. + */ + if (iqs7222_sl_events[i].enable && !reg_offset) + sldr_setup[9] &= ~iqs7222_sl_events[i].enable; + + event_node = fwnode_get_named_child_node(sldr_node, event_name); + if (!event_node) + continue; + + error = iqs7222_parse_props(iqs7222, &event_node, sldr_index, + IQS7222_REG_GRP_SLDR, + reg_offset ? + IQS7222_REG_KEY_RESERVED : + iqs7222_sl_events[i].reg_key); + if (error) + return error; + + error = fwnode_property_read_u32(event_node, "linux,code", + &val); + if (error) { + dev_err(&client->dev, "Failed to read %s code: %d\n", + fwnode_get_name(sldr_node), error); + return error; + } + + iqs7222->sl_code[sldr_index][i] = val; + input_set_capability(iqs7222->keypad, EV_KEY, val); + + /* + * The press/release event is determined based on whether the + * coordinate field reports 0xFFFF and has no explicit enable + * control. + */ + if (!iqs7222_sl_events[i].enable || reg_offset) + continue; + + sldr_setup[9] |= iqs7222_sl_events[i].enable; + + error = iqs7222_gpio_select(iqs7222, event_node, + iqs7222_sl_events[i].enable, + 1568 + sldr_index * 30); + if (error) + return error; + + if (!dev_desc->event_offset) + continue; + + sys_setup[dev_desc->event_offset] |= BIT(10 + sldr_index); + } + + /* + * The following call handles a special pair of properties that shift + * to make room for a wheel enable control in the case of IQS7222C. + */ + return iqs7222_parse_props(iqs7222, &sldr_node, sldr_index, + IQS7222_REG_GRP_SLDR, + dev_desc->wheel_enable ? + IQS7222_REG_KEY_WHEEL : + IQS7222_REG_KEY_NO_WHEEL); +} + +static int iqs7222_parse_all(struct iqs7222_private *iqs7222) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + const struct iqs7222_reg_grp_desc *reg_grps = dev_desc->reg_grps; + u16 *sys_setup = iqs7222->sys_setup; + int error, i; + + if (dev_desc->event_offset) + sys_setup[dev_desc->event_offset] = IQS7222_EVENT_MASK_ATI; + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_CYCLE].num_row; i++) { + error = iqs7222_parse_cycle(iqs7222, i); + if (error) + return error; + } + + error = iqs7222_parse_props(iqs7222, NULL, 0, IQS7222_REG_GRP_GLBL, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_GPIO].num_row; i++) { + struct fwnode_handle *gpio_node = NULL; + u16 *gpio_setup = iqs7222->gpio_setup[i]; + int j; + + gpio_setup[0] &= ~IQS7222_GPIO_SETUP_0_GPIO_EN; + gpio_setup[1] = 0; + gpio_setup[2] = 0; + + error = iqs7222_parse_props(iqs7222, &gpio_node, i, + IQS7222_REG_GRP_GPIO, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (reg_grps[IQS7222_REG_GRP_GPIO].num_row == 1) + continue; + + /* + * The IQS7222C exposes multiple GPIO and must be informed + * as to which GPIO this group represents. + */ + for (j = 0; j < ARRAY_SIZE(iqs7222_gpio_links); j++) + gpio_setup[0] &= ~BIT(iqs7222_gpio_links[j]); + + gpio_setup[0] |= BIT(iqs7222_gpio_links[i]); + } + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_CHAN].num_row; i++) { + u16 *chan_setup = iqs7222->chan_setup[i]; + + chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_REF_MODE_MASK; + chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_CHAN_EN; + + chan_setup[5] = 0; + } + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_CHAN].num_row; i++) { + error = iqs7222_parse_chan(iqs7222, i); + if (error) + return error; + } + + error = iqs7222_parse_props(iqs7222, NULL, 0, IQS7222_REG_GRP_FILT, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) { + u16 *sldr_setup = iqs7222->sldr_setup[i]; + + sldr_setup[0] &= ~IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK; + + error = iqs7222_parse_sldr(iqs7222, i); + if (error) + return error; + } + + sys_setup[0] &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK; + sys_setup[0] &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK; + + sys_setup[0] |= IQS7222_SYS_SETUP_ACK_RESET; + + return iqs7222_parse_props(iqs7222, NULL, 0, IQS7222_REG_GRP_SYS, + IQS7222_REG_KEY_NONE); +} + +static int iqs7222_report(struct iqs7222_private *iqs7222) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row; + int num_stat = dev_desc->reg_grps[IQS7222_REG_GRP_STAT].num_col; + int error, i, j; + __le16 status[IQS7222_MAX_COLS_STAT]; + + error = iqs7222_read_burst(iqs7222, IQS7222_SYS_STATUS, status, + num_stat); + if (error) + return error; + + if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_RESET) { + dev_err(&client->dev, "Unexpected device reset\n"); + return iqs7222_dev_init(iqs7222, WRITE); + } + + if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_ATI_ERROR) { + dev_err(&client->dev, "Unexpected ATI error\n"); + return iqs7222_ati_trigger(iqs7222); + } + + if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_ATI_ACTIVE) + return 0; + + for (i = 0; i < num_chan; i++) { + u16 *chan_setup = iqs7222->chan_setup[i]; + + if (!(chan_setup[0] & IQS7222_CHAN_SETUP_0_CHAN_EN)) + continue; + + for (j = 0; j < ARRAY_SIZE(iqs7222_kp_events); j++) { + /* + * Proximity state begins at offset 2 and spills into + * offset 3 for devices with more than 16 channels. + * + * Touch state begins at the first offset immediately + * following proximity state. + */ + int k = 2 + j * (num_chan > 16 ? 2 : 1); + u16 state = le16_to_cpu(status[k + i / 16]); + + input_event(iqs7222->keypad, + iqs7222->kp_type[i][j], + iqs7222->kp_code[i][j], + !!(state & BIT(i % 16))); + } + } + + for (i = 0; i < dev_desc->reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) { + u16 *sldr_setup = iqs7222->sldr_setup[i]; + u16 sldr_pos = le16_to_cpu(status[4 + i]); + u16 state = le16_to_cpu(status[6 + i]); + + if (!(sldr_setup[0] & IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK)) + continue; + + if (sldr_pos < dev_desc->sldr_res) + input_report_abs(iqs7222->keypad, iqs7222->sl_axis[i], + sldr_pos); + + for (j = 0; j < ARRAY_SIZE(iqs7222_sl_events); j++) { + u16 mask = iqs7222_sl_events[j].mask; + u16 val = iqs7222_sl_events[j].val; + + if (!iqs7222_sl_events[j].enable) { + input_report_key(iqs7222->keypad, + iqs7222->sl_code[i][j], + sldr_pos < dev_desc->sldr_res); + continue; + } + + /* + * The remaining offsets represent gesture state, and + * are discarded in the case of IQS7222C because only + * absolute position is reported. + */ + if (num_stat < IQS7222_MAX_COLS_STAT) + continue; + + input_report_key(iqs7222->keypad, + iqs7222->sl_code[i][j], + (state & mask) == val); + } + } + + input_sync(iqs7222->keypad); + + return 0; +} + +static irqreturn_t iqs7222_irq(int irq, void *context) +{ + struct iqs7222_private *iqs7222 = context; + + return iqs7222_report(iqs7222) ? IRQ_NONE : IRQ_HANDLED; +} + +static int iqs7222_probe(struct i2c_client *client) +{ + struct iqs7222_private *iqs7222; + unsigned long irq_flags; + int error, irq; + + iqs7222 = devm_kzalloc(&client->dev, sizeof(*iqs7222), GFP_KERNEL); + if (!iqs7222) + return -ENOMEM; + + i2c_set_clientdata(client, iqs7222); + iqs7222->client = client; + + iqs7222->keypad = devm_input_allocate_device(&client->dev); + if (!iqs7222->keypad) + return -ENOMEM; + + iqs7222->keypad->name = client->name; + iqs7222->keypad->id.bustype = BUS_I2C; + + /* + * The RDY pin behaves as an interrupt, but must also be polled ahead + * of unsolicited I2C communication. As such, it is first opened as a + * GPIO and then passed to gpiod_to_irq() to register the interrupt. + */ + iqs7222->irq_gpio = devm_gpiod_get(&client->dev, "irq", GPIOD_IN); + if (IS_ERR(iqs7222->irq_gpio)) { + error = PTR_ERR(iqs7222->irq_gpio); + dev_err(&client->dev, "Failed to request IRQ GPIO: %d\n", + error); + return error; + } + + iqs7222->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(iqs7222->reset_gpio)) { + error = PTR_ERR(iqs7222->reset_gpio); + dev_err(&client->dev, "Failed to request reset GPIO: %d\n", + error); + return error; + } + + error = iqs7222_hard_reset(iqs7222); + if (error) + return error; + + error = iqs7222_dev_info(iqs7222); + if (error) + return error; + + error = iqs7222_dev_init(iqs7222, READ); + if (error) + return error; + + error = iqs7222_parse_all(iqs7222); + if (error) + return error; + + error = iqs7222_dev_init(iqs7222, WRITE); + if (error) + return error; + + error = iqs7222_report(iqs7222); + if (error) + return error; + + error = input_register_device(iqs7222->keypad); + if (error) { + dev_err(&client->dev, "Failed to register device: %d\n", error); + return error; + } + + irq = gpiod_to_irq(iqs7222->irq_gpio); + if (irq < 0) + return irq; + + irq_flags = gpiod_is_active_low(iqs7222->irq_gpio) ? IRQF_TRIGGER_LOW + : IRQF_TRIGGER_HIGH; + irq_flags |= IRQF_ONESHOT; + + error = devm_request_threaded_irq(&client->dev, irq, NULL, iqs7222_irq, + irq_flags, client->name, iqs7222); + if (error) + dev_err(&client->dev, "Failed to request IRQ: %d\n", error); + + return error; +} + +static const struct of_device_id iqs7222_of_match[] = { + { .compatible = "azoteq,iqs7222a" }, + { .compatible = "azoteq,iqs7222b" }, + { .compatible = "azoteq,iqs7222c" }, + { } +}; +MODULE_DEVICE_TABLE(of, iqs7222_of_match); + +static struct i2c_driver iqs7222_i2c_driver = { + .driver = { + .name = "iqs7222", + .of_match_table = iqs7222_of_match, + }, + .probe_new = iqs7222_probe, +}; +module_i2c_driver(iqs7222_i2c_driver); + +MODULE_AUTHOR("Jeff LaBundy "); +MODULE_DESCRIPTION("Azoteq IQS7222A/B/C Capacitive Touch Controller"); +MODULE_LICENSE("GPL");