From: Laurent Pinchart Date: Wed, 31 Aug 2022 08:26:52 +0000 (+0300) Subject: drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode X-Git-Tag: v6.6.17~3937^2~23^2~1754 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e43d5864f36ab32f831b1af7bc2171031e58e2ac;p=platform%2Fkernel%2Flinux-rpi.git drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode Despite the SN65DSI86 being an eDP bridge, on some systems its output is routed to a DisplayPort connector. Enable DisplayPort mode when the next component in the display pipeline is detected as a DisplayPort connector, and disable eDP features in that case. Signed-off-by: Laurent Pinchart Reworked to set bridge type based on the next bridge/connector. Signed-off-by: Kieran Bingham Reviewed-by: Laurent Pinchart Reviewed-by: Douglas Anderson Signed-off-by: Tomi Valkeinen -- Changes since v1/RFC: - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to devm_drm_of_get_bridge" - eDP/DP mode determined from the next bridge connector type. Changes since v2: - Remove setting of Standard DP Scrambler Seed. (It's read-only). - Prevent setting DP_EDP_CONFIGURATION_SET in ti_sn_bridge_atomic_enable() - Use Doug's suggested text for disabling ASSR on DP mode. Changes since v3: - Remove ASSR_CONTROL definition Changes since v4: - Refactor code to configure the DP/eDP scrambler in one place. Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-3-tomi.valkeinen@ideasonboard.com --- diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 09d3c65..6e053e2 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -92,6 +92,8 @@ #define SN_DATARATE_CONFIG_REG 0x94 #define DP_DATARATE_MASK GENMASK(7, 5) #define DP_DATARATE(x) ((x) << 5) +#define SN_TRAINING_SETTING_REG 0x95 +#define SCRAMBLE_DISABLE BIT(4) #define SN_ML_TX_MODE_REG 0x96 #define ML_TX_MAIN_LINK_OFF 0 #define ML_TX_NORMAL_MODE BIT(0) @@ -1070,12 +1072,23 @@ static void ti_sn_bridge_atomic_enable(struct drm_bridge *bridge, /* * The SN65DSI86 only supports ASSR Display Authentication method and - * this method is enabled by default. An eDP panel must support this + * this method is enabled for eDP panels. An eDP panel must support this * authentication method. We need to enable this method in the eDP panel * at DisplayPort address 0x0010A prior to link training. + * + * As only ASSR is supported by SN65DSI86, for full DisplayPort displays + * we need to disable the scrambler. */ - drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET, - DP_ALTERNATE_SCRAMBLER_RESET_ENABLE); + if (pdata->bridge.type == DRM_MODE_CONNECTOR_eDP) { + drm_dp_dpcd_writeb(&pdata->aux, DP_EDP_CONFIGURATION_SET, + DP_ALTERNATE_SCRAMBLER_RESET_ENABLE); + + regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG, + SCRAMBLE_DISABLE, 0); + } else { + regmap_update_bits(pdata->regmap, SN_TRAINING_SETTING_REG, + SCRAMBLE_DISABLE, SCRAMBLE_DISABLE); + } bpp = ti_sn_bridge_get_bpp(connector); /* Set the DP output format (18 bpp or 24 bpp) */ @@ -1241,6 +1254,8 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev, pdata->bridge.funcs = &ti_sn_bridge_funcs; pdata->bridge.of_node = np; + pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort + ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP; drm_bridge_add(&pdata->bridge);