From: Matti Vaittinen Date: Fri, 8 May 2020 15:46:17 +0000 (+0300) Subject: dt-bindings: battery: add new battery parameters X-Git-Tag: v5.15~3628^2~45 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e3420b49949c79d6182dd8128fa7a3958da01b07;p=platform%2Fkernel%2Flinux-starfive.git dt-bindings: battery: add new battery parameters Add: - trickle-charge-current-microamp: Some chargers have 3 charging stages. First one when battery is almost empty is often called as trickle-charge. Last state when battery has been "woken up" is usually called as fast-charge. In addition to this some chargers have a 'middle state' which ROHM BD99954 data-sheet describes as pre-charge. Some batteries can benefit from this 3-phase charging [citation needed]. Introduce trickle-charge-current-microamp so that batteries can give charging current limit for all three states. - precharge-upper-limit-microvolt: When battery voltage has reached certain limit we change from trickle-charge to next charging state (pre-charge for BD99954). Allow battery to specify this limit. - re-charge-voltage-microvolt: Allow giving a battery specific voltage limit for chargers which can automatically re-start charging when battery has discharghed down to this limit. - over-voltage-threshold-microvolt Allow specifying voltage threshold after which the battery is assumed to be faulty. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring Signed-off-by: Sebastian Reichel --- diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 3049cf8..5e29595 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -11,15 +11,21 @@ different type. This prevents unpredictable, potentially harmful, behavior should a replacement that changes the battery type occur without a corresponding update to the dtb. +Please note that not all charger drivers respect all of the properties. + Required Properties: - compatible: Must be "simple-battery" Optional Properties: + - over-voltage-threshold-microvolt: battery over-voltage limit + - re-charge-voltage-microvolt: limit to automatically start charging again - voltage-min-design-microvolt: drained battery voltage - voltage-max-design-microvolt: fully charged battery voltage - energy-full-design-microwatt-hours: battery design energy - charge-full-design-microamp-hours: battery design capacity + - trickle-charge-current-microamp: current for trickle-charge phase - precharge-current-microamp: current for pre-charge phase + - precharge-upper-limit-microvolt: limit when to change to constant charging - charge-term-current-microamp: current for charge termination phase - constant-charge-current-max-microamp: maximum constant input current - constant-charge-voltage-max-microvolt: maximum constant input voltage