From: Luan Yuan Date: Wed, 8 May 2019 08:07:14 +0000 (+0800) Subject: common: lcd: support yeke panel [1/1] X-Git-Tag: khadas-vims-v0.9.6-release~474 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e2161bb34659dbadcb684febea027fb13b79c377;p=platform%2Fkernel%2Flinux-amlogic.git common: lcd: support yeke panel [1/1] PD#SWPL-8219 Problem: not support lcd panel in ac202 Solution: support lcd panel. Verify: verify by ac202. Change-Id: Ib462a3536c21f0a55c0e0ff947f01c8f52ef3f13 Signed-off-by: Luan Yuan --- diff --git a/arch/arm/boot/dts/amlogic/mesonsm1_skt-panel.dtsi b/arch/arm/boot/dts/amlogic/mesonsm1_skt-panel.dtsi index 5975cea..0a209ba 100644 --- a/arch/arm/boot/dts/amlogic/mesonsm1_skt-panel.dtsi +++ b/arch/arm/boot/dts/amlogic/mesonsm1_skt-panel.dtsi @@ -17,7 +17,7 @@ / { lcd{ - compatible = "amlogic, sm1"; + compatible = "amlogic, lcd-sm1"; dev_name = "lcd"; mode = "tablet"; status = "okay"; @@ -48,9 +48,9 @@ * power value:(0=output low, 1=output high, 2=input) * power delay:(unit in ms) */ - lcd_cpu-gpios = <&gpio GPIOZ_9 GPIO_ACTIVE_HIGH - &gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; - lcd_cpu_gpio_names = "GPIOZ_9","GPIOZ_8"; + lcd_cpu-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH + &gpio GPIOH_7 GPIO_ACTIVE_HIGH>; + lcd_cpu_gpio_names = "GPIOH_4","GPIOH_7"; lcd_0{ model_name = "B080XAN01"; @@ -152,6 +152,50 @@ 0xff 0 0 0>; backlight_index = <0>; }; + lcd_7{ + model_name = "EK79007"; + interface = "mipi"; + basic_setting = <1024 600 /*h_active, v_active*/ + 1354 636 /*h_period, v_period*/ + 8 /*lcd_bits*/ + 119 80>; /*screen_widht, screen_height*/ + lcd_timing = <10 160 0 /*hs_width,hs_bp,hs_pol*/ + 1 23 0>; /*vs_width,vs_bp,vs_pol*/ + clk_attr = <0 /*fr_adj_type(0=clock,1=htotal,2=vtotal)*/ + 0 /*clk_ss_level*/ + 1 /*clk_auto_generate*/ + 51668640>; /*pixel_clk(unit in Hz)*/ + mipi_attr = <4 /*lane_num*/ + 1000 /*bit_rate_max(MHz)*/ + 0 /*factor(*100, default 0 for auto)*/ + 1 /*operation_mode_init(0=video, 1=command)*/ + 0 /*operation_mode_display(0=video, 1=command)*/ + 2 /* + *video_mode_type + *(0=sync_pulse,1=sync_event,2=burst) + */ + 1 /*clk_always_hs(0=disable,1=enable)*/ + 0>; /*phy_switch(0=auto,1=standard,2=slow)*/ + /* dsi_init: data_type, num, data... */ + dsi_init_on = <0xff 0xff>; /* ending flag */ + dsi_init_off = <0xff 0xff>; /* ending flag */ + /* extern_init: 0xff for invalid */ + extern_init = <6>; + /* power step: type,index,value,delay(ms) */ + power_on_step = < + 0 0 1 10 + 0 1 0 100 + 0 0 0 200 + 0 1 1 100 + 2 0 0 100 + 0xff 0 0 0>; + power_off_step = < + 2 0 0 0 + 0 1 0 100 + 0 0 1 100 + 0xff 0 0 0>; + backlight_index = <0>; + }; }; lcd_extern{ @@ -418,6 +462,26 @@ 0xff 150 /* delay 150ms */ 0xff 0xff>; /*ending*/ }; + extern_6{ + index = <6>; + extern_name = "mipi_default"; /* LD055LF1 */ + status = "okay"; + type = <2>; /* 0=i2c, 1=spi, 2=mipi */ + cmd_size = <0xff>; + init_on = < + 0x15 2 0x80 0xAC + 0x15 2 0x81 0xB8 + 0x15 2 0x82 0x09 + 0x15 2 0x83 0x78 + 0x15 2 0x84 0x7F + 0x15 2 0x85 0xBB + 0x15 2 0x86 0x70 + 0xff 40 + 0xff 0xff>; /*ending*/ + init_off = < + 0xff 200 /* delay 50ms */ + 0xff 0xff>; /*ending*/ + }; }; backlight{ @@ -425,14 +489,12 @@ dev_name = "backlight"; status = "okay"; key_valid = <0>; - pinctrl-names = "pwm_on","pwm_off"; + pinctrl-names = "pwm_on"; pinctrl-0 = <&pwm_f_pins2>; - pinctrl-1 = <&bl_pwm_off_pins>; pinctrl_version = <2>; /* for uboot */ bl_pwm_config = <&bl_pwm_conf>; - bl-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH - &gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - bl_gpio_names = "GPIOH_4","GPIOH_5"; + bl-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + bl_gpio_names = "GPIOH_5"; /* pwm port: PWM_A, PWM_B, PWM_C, PWM_D, PWM_E, PWM_F, PWM_VS*/ /* power index:(point gpios_index, 0xff=invalid) @@ -447,14 +509,15 @@ bl_level_attr = <255 10 /*max, min*/ 128 128>; /*mid, mid_mapping*/ bl_ctrl_method = <1>; /* 1=pwm, 2=pwm_combo, 4=extern */ - bl_power_attr = <0 /*en_gpio_index*/ - 1 0 /*on_value, off_value*/ - 200 200>; /*on_delay(ms), off_delay(ms)*/ + //bl_power_attr = <0 /*en_gpio_index*/ + // 1 0 /*on_value, off_value*/ + // 200 200>; /*on_delay(ms), off_delay(ms)*/ bl_pwm_port = "PWM_F"; - bl_pwm_attr = <0 /*pwm_method*/ - 180 /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/ + bl_pwm_attr = <1 /*pwm_method*/ + /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/ + 25000 100 25>; /*duty_max(%), duty_min(%)*/ - bl_pwm_power = <1 1 /*pwm_gpio_index, pwm_gpio_off*/ + bl_pwm_power = <0 0 /*pwm_gpio_index, pwm_gpio_off*/ 10 10>; /*pwm_on_delay(ms), pwm_off_delay(ms)*/ bl_pwm_en_sequence_reverse = <0>; /* 1 for reverse */ }; diff --git a/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202.dts b/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202.dts index a71aecd..acd77ac 100644 --- a/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202.dts +++ b/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202.dts @@ -1241,7 +1241,7 @@ interrupt-names = "irq_spdifin"; pinctrl-names = "spdif_pins"; - pinctrl-0 = <&spdifout &spdifin>; + pinctrl-0 = <&spdifout>; /* bob remove &spdifin*/ status = "okay"; }; @@ -1551,12 +1551,15 @@ }; }; - spdifin: spdifin { - mux {/* GPIOH_5 */ - groups = "spdif_in_h"; - function = "spdif_in"; - }; - }; + /* GPIOH_5 */ + /* bob remove spdifin + *spdifin: spdifin { + * mux {/* GPIOH_5 + * groups = "spdif_in_h"; + * function = "spdif_in"; + * }; + *}; + */ pdmin: pdmin { mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */ @@ -1569,13 +1572,15 @@ }; }; - bl_pwm_off_pins:bl_pwm_off_pin { - mux { - pins = "GPIOH_5"; - function = "gpio_periphs"; - output-high; - }; - }; + /* + *bl_pwm_off_pins:bl_pwm_off_pin { + * mux { + * pins = "GPIOH_5"; + * function = "gpio_periphs"; + * output-high; + * }; + *}; + */ clk12_24_z_pins:clk12_24_z_pins { mux { diff --git a/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts b/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts index c3b3066..e8ffe1d 100644 --- a/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts +++ b/arch/arm/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts @@ -1241,7 +1241,7 @@ interrupt-names = "irq_spdifin"; pinctrl-names = "spdif_pins"; - pinctrl-0 = <&spdifout &spdifin>; + pinctrl-0 = <&spdifout>;/* bob remove &spdifin*/ status = "okay"; }; @@ -1551,12 +1551,15 @@ }; }; - spdifin: spdifin { - mux {/* GPIOH_5 */ - groups = "spdif_in_h"; - function = "spdif_in"; - }; - }; + /*GPIOH_5 */ + /*bob remove spdifin + *spdifin: spdifin { + * mux {/* GPIOH_5 + * groups = "spdif_in_h"; + * function = "spdif_in"; + * }; + *}; + */ pdmin: pdmin { mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */ @@ -1569,13 +1572,15 @@ }; }; - bl_pwm_off_pins:bl_pwm_off_pin { - mux { - pins = "GPIOH_5"; - function = "gpio_periphs"; - output-high; - }; - }; + /* + *bl_pwm_off_pins:bl_pwm_off_pin { + * mux { + * pins = "GPIOH_5"; + * function = "gpio_periphs"; + * output-high; + * }; + *}; + */ clk12_24_z_pins:clk12_24_z_pins { mux { diff --git a/arch/arm64/boot/dts/amlogic/mesonsm1_skt-panel.dtsi b/arch/arm64/boot/dts/amlogic/mesonsm1_skt-panel.dtsi index e12ca02..623f5272 100644 --- a/arch/arm64/boot/dts/amlogic/mesonsm1_skt-panel.dtsi +++ b/arch/arm64/boot/dts/amlogic/mesonsm1_skt-panel.dtsi @@ -1,6 +1,17 @@ /* + * arch/arm64/boot/dts/amlogic/mesonsm1_skt-panel.dtsi * - * Copyright (C) 2019 Amlogic, Inc. All rights reserved. + * Copyright (C) 2016 Amlogic, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. * */ @@ -36,9 +47,9 @@ * power value:(0=output low, 1=output high, 2=input) * power delay:(unit in ms) */ - lcd_cpu-gpios = <&gpio GPIOZ_9 GPIO_ACTIVE_HIGH - &gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; - lcd_cpu_gpio_names = "GPIOZ_9","GPIOZ_8"; + lcd_cpu-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH + &gpio GPIOH_7 GPIO_ACTIVE_HIGH>; + lcd_cpu_gpio_names = "GPIOH_4","GPIOH_7"; lcd_0{ model_name = "B080XAN01"; @@ -140,6 +151,50 @@ 0xff 0 0 0>; backlight_index = <0>; }; + lcd_7{ + model_name = "EK79007"; + interface = "mipi"; + basic_setting = <1024 600 /*h_active, v_active*/ + 1354 636 /*h_period, v_period*/ + 8 /*lcd_bits*/ + 119 80>; /*screen_widht, screen_height*/ + lcd_timing = <10 160 0 /*hs_width,hs_bp,hs_pol*/ + 1 23 0>; /*vs_width,vs_bp,vs_pol*/ + clk_attr = <0 /*fr_adj_type(0=clock,1=htotal,2=vtotal)*/ + 0 /*clk_ss_level*/ + 1 /*clk_auto_generate*/ + 51668640>; /*pixel_clk(unit in Hz)*/ + mipi_attr = <4 /*lane_num*/ + 1000 /*bit_rate_max(MHz)*/ + 0 /*factor(*100, default 0 for auto)*/ + 1 /*operation_mode_init(0=video, 1=command)*/ + 0 /*operation_mode_display(0=video, 1=command)*/ + 2 /* + *video_mode_type + *(0=sync_pulse,1=sync_event,2=burst) + */ + 1 /*clk_always_hs(0=disable,1=enable)*/ + 0>; /*phy_switch(0=auto,1=standard,2=slow)*/ + /* dsi_init: data_type, num, data... */ + dsi_init_on = <0xff 0xff>; /* ending flag */ + dsi_init_off = <0xff 0xff>; /* ending flag */ + /* extern_init: 0xff for invalid */ + extern_init = <6>; + /* power step: type,index,value,delay(ms) */ + power_on_step = < + 0 0 1 10 + 0 1 0 100 + 0 0 0 200 + 0 1 1 100 + 2 0 0 100 + 0xff 0 0 0>; + power_off_step = < + 2 0 0 0 + 0 1 0 100 + 0 0 1 100 + 0xff 0 0 0>; + backlight_index = <0>; + }; }; lcd_extern{ @@ -405,20 +460,38 @@ 0xfd 1 150 /* delay 150ms */ 0xff 0>; /*ending*/ }; + extern_6{ + index = <6>; + extern_name = "mipi_default"; /* LD055LF1 */ + status = "okay"; + type = <2>; /* 0=i2c, 1=spi, 2=mipi */ + cmd_size = <0xff>; + init_on = < + 0x15 2 0x80 0xAC + 0x15 2 0x81 0xB8 + 0x15 2 0x82 0x09 + 0x15 2 0x83 0x78 + 0x15 2 0x84 0x7F + 0x15 2 0x85 0xBB + 0x15 2 0x86 0x70 + 0xff 40 + 0xff 0xff>; /*ending*/ + init_off = < + 0xff 200 /* delay 50ms */ + 0xff 0xff>; /*ending*/ + }; }; backlight{ compatible = "amlogic, backlight-sm1"; status = "okay"; key_valid = <0>; - pinctrl-names = "pwm_on","pwm_off"; + pinctrl-names = "pwm_on"; pinctrl-0 = <&pwm_f_pins2>; - pinctrl-1 = <&bl_pwm_off_pins>; pinctrl_version = <2>; /* for uboot */ bl_pwm_config = <&bl_pwm_conf>; - bl-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH - &gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - bl_gpio_names = "GPIOH_4","GPIOH_5"; + bl-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + bl_gpio_names = "GPIOH_5"; /* pwm port: PWM_A, PWM_B, PWM_C, PWM_D, PWM_E, PWM_F, PWM_VS*/ /* power index:(point gpios_index, 0xff=invalid) @@ -433,14 +506,15 @@ bl_level_attr = <255 10 /*max, min*/ 128 128>; /*mid, mid_mapping*/ bl_ctrl_method = <1>; /* 1=pwm, 2=pwm_combo, 4=extern */ - bl_power_attr = <0 /*en_gpio_index*/ - 1 0 /*on_value, off_value*/ - 200 200>; /*on_delay(ms), off_delay(ms)*/ + //bl_power_attr = <0 /*en_gpio_index*/ + // 1 0 /*on_value, off_value*/ + // 200 200>; /*on_delay(ms), off_delay(ms)*/ bl_pwm_port = "PWM_F"; - bl_pwm_attr = <0 /*pwm_method*/ - 180 /*pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/ + bl_pwm_attr = <1 /*pwm_method*/ + /*180pwm_freq(pwm:Hz, pwm_vs:multiple of vs)*/ + 25000 100 25>; /*duty_max(%), duty_min(%)*/ - bl_pwm_power = <1 1 /*pwm_gpio_index, pwm_gpio_off*/ + bl_pwm_power = <0 0 /*pwm_gpio_index, pwm_gpio_off*/ 10 10>; /*pwm_on_delay(ms), pwm_off_delay(ms)*/ bl_pwm_en_sequence_reverse = <0>; /* 1 for reverse */ }; diff --git a/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202.dts b/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202.dts index e847862..04d6cad 100644 --- a/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202.dts +++ b/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202.dts @@ -1538,12 +1538,15 @@ }; }; - spdifin: spdifin { - mux {/* GPIOH_5 */ - groups = "spdif_in_h"; - function = "spdif_in"; - }; - }; + /*GPIOH_5 */ + /*bob remove spdifin + *spdifin: spdifin { + * mux {/* GPIOH_5 + * groups = "spdif_in_h"; + * function = "spdif_in"; + * }; + *}; + */ pdmin: pdmin { mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */ @@ -1556,13 +1559,15 @@ }; }; - bl_pwm_off_pins:bl_pwm_off_pin { - mux { - pins = "GPIOH_5"; - function = "gpio_periphs"; - output-high; - }; - }; + /* + *bl_pwm_off_pins:bl_pwm_off_pin { + * mux { + * pins = "GPIOH_5"; + * function = "gpio_periphs"; + * output-high; + * }; + *}; + */ clk12_24_z_pins:clk12_24_z_pins { mux { diff --git a/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts b/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts index b89f492..7314024 100644 --- a/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts +++ b/arch/arm64/boot/dts/amlogic/sm1_s905d3_ac202_1g.dts @@ -1538,12 +1538,15 @@ }; }; - spdifin: spdifin { - mux {/* GPIOH_5 */ - groups = "spdif_in_h"; - function = "spdif_in"; - }; - }; + /*GPIOH_5 */ + /*bob remove spdifin + *spdifin: spdifin { + * mux {/* GPIOH_5 + * groups = "spdif_in_h"; + * function = "spdif_in"; + * }; + *}; + */ pdmin: pdmin { mux { /* GPIOA_5, GPIOA_6, GPIOA_8, GPIOA_9, GPIOA_7 */ @@ -1556,13 +1559,15 @@ }; }; - bl_pwm_off_pins:bl_pwm_off_pin { - mux { - pins = "GPIOH_5"; - function = "gpio_periphs"; - output-high; - }; - }; + /* + *bl_pwm_off_pins:bl_pwm_off_pin { + * mux { + * pins = "GPIOH_5"; + * function = "gpio_periphs"; + * output-high; + * }; + *}; + */ clk12_24_z_pins:clk12_24_z_pins { mux {