From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 31 May 2005 20:33:21 +0000 (-0400)
Subject: [PATCH] USB UHCI: Detect invalid ports
X-Git-Tag: v2.6.13-rc1~45^2~12^2~12
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=e07fefa6b212f43c40fdbc1a62de690d91a4b617;p=platform%2Fkernel%2Flinux-stable.git

[PATCH] USB UHCI: Detect invalid ports

This patch changes the way uhci-hcd detects valid ports.  The
specification doesn't mention any way to find out how many ports a
controller has, so the driver has to use some heuristics, reading the port
status and control register and deciding whether the value makes sense.
With this patch the driver will recognize a typical failure mode (all bits
set to one) for nonexistent ports and won't assume there are always at
least 2 ports -- such an assumption seems silly if the heuristics have
already shown that the ports don't exist.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index fdf54295da73..0d5d2545bf07 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -495,24 +495,24 @@ static int uhci_reset(struct usb_hcd *hcd)
 
 	/* The UHCI spec says devices must have 2 ports, and goes on to say
 	 * they may have more but gives no way to determine how many there
-	 * are.  However, according to the UHCI spec, Bit 7 of the port
+	 * are.  However according to the UHCI spec, Bit 7 of the port
 	 * status and control register is always set to 1.  So we try to
-	 * use this to our advantage.
+	 * use this to our advantage.  Another common failure mode when
+	 * a nonexistent register is addressed is to return all ones, so
+	 * we test for that also.
 	 */
 	for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
 		unsigned int portstatus;
 
 		portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2));
-		if (!(portstatus & 0x0080))
+		if (!(portstatus & 0x0080) || portstatus == 0xffff)
 			break;
 	}
 	if (debug)
 		dev_info(uhci_dev(uhci), "detected %d ports\n", port);
 
-	/* Anything less than 2 or greater than 7 is weird,
-	 * so we'll ignore it.
-	 */
-	if (port < 2 || port > UHCI_RH_MAXCHILD) {
+	/* Anything greater than 7 is weird so we'll ignore it. */
+	if (port > UHCI_RH_MAXCHILD) {
 		dev_info(uhci_dev(uhci), "port count misdetected? "
 				"forcing to 2 ports\n");
 		port = 2;