From: Suchang Ko Date: Tue, 12 May 2015 06:34:43 +0000 (+0900) Subject: ARM: at91/dt: sama5d4: add spi1, spi2 dt nodes X-Git-Tag: v4.9.8~4041^2~9^2~30 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=df2453fe0d635eaf59c9e56b9091efbc71b65281;p=platform%2Fkernel%2Flinux-rpi3.git ARM: at91/dt: sama5d4: add spi1, spi2 dt nodes Add sama5d4 spi1, spi2 dt nodes & pinctrl. Signed-off-by: Suchang Ko [nicolas.ferre@atmel.com: split patch, reorder & whitespace fixes] Signed-off-by: Nicolas Ferre --- diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index dcde334..cb312c9 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1142,6 +1142,46 @@ status = "disabled"; }; + spi1: spi@fc018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc018000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi2: spi@fc01c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc01c000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(14))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + clocks = <&spi2_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + tcb1: timer@fc020000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xfc020000 0x100>; @@ -1699,6 +1739,26 @@ }; }; + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + ; + }; + }; + + spi2 { + pinctrl_spi2: spi2-0 { + atmel,pins = + ; + }; + }; + uart0 { pinctrl_uart0: uart0-0 { atmel,pins =