From: Xingyu Chen <xingyu.chen@amlogic.com>
Date: Fri, 8 Dec 2017 01:54:18 +0000 (+0800)
Subject: ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC
X-Git-Tag: v4.19~1679^2~22^2~2
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=de05ded6a99ff4382c9d2d4b746306bb6b9cf907;p=platform%2Fkernel%2Flinux-rpi.git

ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC

Add new pinctrl DT info for the Amlogic's Meson-AXG SoC.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
[khilman: dropped unnecessary include]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 01beb21..d356ce74 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -171,6 +171,32 @@
 			#mbox-cells = <1>;
 		};
 
+		periphs: periphs@ff634000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff634000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+
+			pinctrl_periphs: pinctrl@480 {
+				compatible = "amlogic,meson-axg-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@480 {
+					reg = <0x0 0x00480 0x0 0x40>,
+						<0x0 0x004e8 0x0 0x14>,
+						<0x0 0x00520 0x0 0x14>,
+						<0x0 0x00430 0x0 0x3c>;
+					reg-names = "mux", "pull", "pull-enable", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_periphs 0 0 86>;
+				};
+			};
+		};
+
 		sram: sram@fffc0000 {
 			compatible = "amlogic,meson-axg-sram", "mmio-sram";
 			reg = <0x0 0xfffc0000 0x0 0x20000>;
@@ -196,6 +222,23 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
+			pinctrl_aobus: pinctrl@14 {
+				compatible = "amlogic,meson-axg-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x00014 0x0 0x8>,
+						<0x0 0x0002c 0x0 0x4>,
+						<0x0 0x00024 0x0 0x8>;
+					reg-names = "mux", "pull", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_aobus 0 0 15>;
+				};
+			};
+
 			uart_AO: serial@3000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;