From: Emil Tantilov Date: Tue, 8 Feb 2011 09:42:41 +0000 (+0000) Subject: ixgbe: cleanup logic related to HW semaphores X-Git-Tag: v2.6.39-rc1~468^2~170^2~18 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=dbf893ee85369debaa05b3c222a40c8ac5273a06;p=profile%2Fivi%2Fkernel-x86-ivi.git ixgbe: cleanup logic related to HW semaphores This change cleans up much of the logic related to the hardware semaphores on the adapters. There were a number of issues with timings that needed to be addressed. Signed-off-by: Emil Tantilov Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index ebbda7d1525..345c32eab4a 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -603,7 +603,6 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) ixgbe_shift_out_eeprom_bits(hw, data, 16); ixgbe_standby_eeprom(hw); - msleep(hw->eeprom.semaphore_delay); /* Done with writing - release the EEPROM */ ixgbe_release_eeprom(hw); } @@ -747,7 +746,7 @@ s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) { s32 status = 0; - u32 eec = 0; + u32 eec; u32 i; if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) @@ -776,15 +775,15 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); status = IXGBE_ERR_EEPROM; } - } - /* Setup EEPROM for Read/Write */ - if (status == 0) { - /* Clear CS and SK */ - eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); + /* Setup EEPROM for Read/Write */ + if (status == 0) { + /* Clear CS and SK */ + eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); + } } return status; } @@ -798,13 +797,10 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) { s32 status = IXGBE_ERR_EEPROM; - u32 timeout; + u32 timeout = 2000; u32 i; u32 swsm; - /* Set timeout value based on size of EEPROM */ - timeout = hw->eeprom.word_size + 1; - /* Get SMBI software semaphore between device drivers first */ for (i = 0; i < timeout; i++) { /* @@ -816,7 +812,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) status = 0; break; } - msleep(1); + udelay(50); } /* Now get the semaphore between SW/FW through the SWESMBI bit */ @@ -844,11 +840,14 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) * was not granted because we don't have access to the EEPROM */ if (i >= timeout) { - hw_dbg(hw, "Driver can't access the Eeprom - Semaphore " + hw_dbg(hw, "SWESMBI Software EEPROM semaphore " "not granted.\n"); ixgbe_release_eeprom_semaphore(hw); status = IXGBE_ERR_EEPROM; } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); } return status; @@ -1081,10 +1080,13 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + /* Delay before attempt to obtain semaphore again to allow FW access */ + msleep(hw->eeprom.semaphore_delay); } /** - * ixgbe_calc_eeprom_checksum - Calculates and returns the checksum + * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum * @hw: pointer to hardware structure **/ u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) @@ -2206,6 +2208,10 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) s32 timeout = 200; while (timeout) { + /* + * SW EEPROM semaphore bit is used for access to all + * SW_FW_SYNC/GSSR bits (not just EEPROM) + */ if (ixgbe_get_eeprom_semaphore(hw)) return IXGBE_ERR_SWFW_SYNC; @@ -2223,7 +2229,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) } if (!timeout) { - hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n"); + hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); return IXGBE_ERR_SWFW_SYNC; }