From: Jacob Keller Date: Fri, 8 Jun 2012 06:59:17 +0000 (+0000) Subject: ixgbe: clean up ixgbe_get_settings ethtool function X-Git-Tag: v3.6-rc1~125^2~472^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=db01896398ae6beba41fc14f1a90d55fd21e6738;p=profile%2Fivi%2Fkernel-adaptation-intel-automotive.git ixgbe: clean up ixgbe_get_settings ethtool function This patch cleans up the method used for determining the link speed of devices. The old method re-wrote some logic already existing in a mac.ops function which should be used instead. The result is much simpler to understand and removes a strange double-check of logic, as well as reducing code redundancy. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 3178f1e..bbc7da5 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -154,100 +154,60 @@ static int ixgbe_get_settings(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; + ixgbe_link_speed supported_link; u32 link_speed = 0; + bool autoneg; bool link_up; - ecmd->supported = SUPPORTED_10000baseT_Full; - ecmd->autoneg = AUTONEG_ENABLE; - ecmd->transceiver = XCVR_EXTERNAL; - if ((hw->phy.media_type == ixgbe_media_type_copper) || - (hw->phy.multispeed_fiber)) { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg); - - switch (hw->mac.type) { - case ixgbe_mac_X540: - ecmd->supported |= SUPPORTED_100baseT_Full; - break; - default: - break; - } - - ecmd->advertising = ADVERTISED_Autoneg; - if (hw->phy.autoneg_advertised) { - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_100_FULL) - ecmd->advertising |= ADVERTISED_100baseT_Full; - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_10GB_FULL) - ecmd->advertising |= ADVERTISED_10000baseT_Full; - if (hw->phy.autoneg_advertised & - IXGBE_LINK_SPEED_1GB_FULL) - ecmd->advertising |= ADVERTISED_1000baseT_Full; - } else { - /* - * Default advertised modes in case - * phy.autoneg_advertised isn't set. - */ - ecmd->advertising |= (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full); - if (hw->mac.type == ixgbe_mac_X540) - ecmd->advertising |= ADVERTISED_100baseT_Full; - } - - if (hw->phy.media_type == ixgbe_media_type_copper) { - ecmd->supported |= SUPPORTED_TP; - ecmd->advertising |= ADVERTISED_TP; - ecmd->port = PORT_TP; - } else { - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising |= ADVERTISED_FIBRE; - ecmd->port = PORT_FIBRE; - } - } else if (hw->phy.media_type == ixgbe_media_type_backplane) { - /* Set as FIBRE until SERDES defined in kernel */ - if (hw->device_id == IXGBE_DEV_ID_82598_BX) { - ecmd->supported = (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - ecmd->autoneg = AUTONEG_DISABLE; - } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) || - (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_Autoneg | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - } else { - ecmd->supported |= (SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE); - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_1000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - } + hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg); + + /* set the supported link speeds */ + if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->supported |= SUPPORTED_10000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) + ecmd->supported |= SUPPORTED_1000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_100_FULL) + ecmd->supported |= SUPPORTED_100baseT_Full; + + /* set the advertised speeds */ + if (hw->phy.autoneg_advertised) { + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising |= ADVERTISED_10000baseT_Full; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + ecmd->advertising |= ADVERTISED_1000baseT_Full; } else { - ecmd->supported |= SUPPORTED_FIBRE; - ecmd->advertising = (ADVERTISED_10000baseT_Full | - ADVERTISED_FIBRE); - ecmd->port = PORT_FIBRE; - ecmd->autoneg = AUTONEG_DISABLE; + /* default modes in case phy.autoneg_advertised isn't set */ + if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising |= ADVERTISED_10000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) + ecmd->advertising |= ADVERTISED_1000baseT_Full; + if (supported_link & IXGBE_LINK_SPEED_100_FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; } - /* Get PHY type */ + if (autoneg) { + ecmd->supported |= SUPPORTED_Autoneg; + ecmd->advertising |= ADVERTISED_Autoneg; + ecmd->autoneg = AUTONEG_ENABLE; + } else + ecmd->autoneg = AUTONEG_DISABLE; + + ecmd->transceiver = XCVR_EXTERNAL; + + /* Determine the remaining settings based on the PHY type. */ switch (adapter->hw.phy.type) { case ixgbe_phy_tn: case ixgbe_phy_aq: case ixgbe_phy_cu_unknown: - /* Copper 10G-BASET */ + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; ecmd->port = PORT_TP; break; case ixgbe_phy_qt: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_FIBRE; break; case ixgbe_phy_nl: @@ -257,42 +217,59 @@ static int ixgbe_get_settings(struct net_device *netdev, case ixgbe_phy_sfp_avago: case ixgbe_phy_sfp_intel: case ixgbe_phy_sfp_unknown: - switch (adapter->hw.phy.sfp_type) { /* SFP+ devices, further checking needed */ + switch (adapter->hw.phy.sfp_type) { case ixgbe_sfp_type_da_cu: case ixgbe_sfp_type_da_cu_core0: case ixgbe_sfp_type_da_cu_core1: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_DA; break; case ixgbe_sfp_type_sr: case ixgbe_sfp_type_lr: case ixgbe_sfp_type_srlr_core0: case ixgbe_sfp_type_srlr_core1: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_FIBRE; break; case ixgbe_sfp_type_not_present: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_NONE; break; case ixgbe_sfp_type_1g_cu_core0: case ixgbe_sfp_type_1g_cu_core1: + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; ecmd->port = PORT_TP; - ecmd->supported = SUPPORTED_TP; - ecmd->advertising = (ADVERTISED_1000baseT_Full | - ADVERTISED_TP); + break; + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; break; case ixgbe_sfp_type_unknown: default: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_OTHER; break; } break; case ixgbe_phy_xaui: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_NONE; break; case ixgbe_phy_unknown: case ixgbe_phy_generic: case ixgbe_phy_sfp_unsupported: default: + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; ecmd->port = PORT_OTHER; break; }