From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 6 Dec 2019 10:51:13 +0000 (+0100)
Subject: arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform
X-Git-Tag: v2020.10~412^2~20
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=dab3fa6fe07769e77378f919ed4a17e54eec0f6c;p=platform%2Fkernel%2Fu-boot.git

arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform

These options are taken from zcu102/104 platforms. Also use OF_SEPARATE
instead of OF_BOARD. Maybe at some point this option will be taken back but
as of now board detection is not ready.

export DEVICE_TREE="zynqmp-zcu102-revA"
make xilinx_zynqmp_virt_defconfig
make -j

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index c7e365d..276794b 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_SYS_TEXT_BASE=0x8000000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
@@ -16,10 +17,14 @@ CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_CMD_BOOTMENU=y
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_BIND=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_FPGA_LOADBP=y
@@ -29,15 +34,17 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_SDRAM=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_BOARD=y
-CONFIG_ENV_IS_IN_FAT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
@@ -53,7 +60,9 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
+CONFIG_GPIO_HOG=y
 CONFIG_XILINX_GPIO=y
+CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
 CONFIG_I2C_MUX=y
@@ -65,29 +74,41 @@ CONFIG_I2C_EEPROM=y
 CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_SYS_I2C_EEPROM_ADDR=0x0
 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_ARASAN=y
+CONFIG_SYS_NAND_MAX_CHIPS=2
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SF_DUAL_FLASH=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHY_MARVELL=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_PHY_NATSEMI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_TI=y
 CONFIG_PHY_VITESSE=y
+CONFIG_PHY_XILINX_GMII2RGMII=y
 CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_SPI=y
+CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQMP_GQSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -101,4 +122,12 @@ CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
 CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
 CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
 CONFIG_USB_FUNCTION_THOR=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_WDT=y
+CONFIG_WDT_CDNS=y
+CONFIG_SPL_GZIP=y
+CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y