From: Praneeth Bajjuri Date: Thu, 10 Jun 2021 00:43:42 +0000 (-0500) Subject: net: phy: dp83867: perform soft reset and retain established link X-Git-Tag: v5.15.73~11783^2~49 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=da9ef50f545f86ffe6ff786174d26500c4db737a;p=platform%2Fkernel%2Flinux-rpi.git net: phy: dp83867: perform soft reset and retain established link Current logic is performing hard reset and causing the programmed registers to be wiped out. as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf 8.6.26 Control Register (CTRL) do SW_RESTART to perform a reset not including the registers, If performed when link is already present, it will drop the link and trigger re-auto negotiation. Signed-off-by: Praneeth Bajjuri Signed-off-by: Geet Modi Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 9bd9a5c0b1db..6bbc81ad295f 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -826,16 +826,12 @@ static int dp83867_phy_reset(struct phy_device *phydev) { int err; - err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET); + err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESTART); if (err < 0) return err; usleep_range(10, 20); - /* After reset FORCE_LINK_GOOD bit is set. Although the - * default value should be unset. Disable FORCE_LINK_GOOD - * for the phy to work properly. - */ return phy_modify(phydev, MII_DP83867_PHYCTRL, DP83867_PHYCR_FORCE_LINK_GOOD, 0); }