From: Mike McCormack Date: Thu, 3 Mar 2011 13:45:08 +0000 (+0900) Subject: staging: rtl8192e: Pass r8192e_priv to phy functions X-Git-Tag: v2.6.39-rc1~469^2~259 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d9ffa6c2e9752bb3c87995e2d97444c713dbc07f;p=platform%2Fupstream%2Fkernel-adaptation-pc.git staging: rtl8192e: Pass r8192e_priv to phy functions Phy functions shouldn't be associated with net_device. Signed-off-by: Mike McCormack Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c index b4d45d6..3cf96aa 100644 --- a/drivers/staging/rtl8192e/r8190_rtl8256.c +++ b/drivers/staging/rtl8192e/r8190_rtl8256.c @@ -23,15 +23,14 @@ * Return: NONE * Note: 8226 support both 20M and 40 MHz *---------------------------------------------------------------------------*/ -void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) //20M or 40M +void PHY_SetRF8256Bandwidth(struct r8192_priv *priv, HT_CHANNEL_WIDTH Bandwidth) //20M or 40M { u8 eRFPath; - struct r8192_priv *priv = ieee80211_priv(dev); //for(eRFPath = RF90_PATH_A; eRFPath NumTotalRFPath; eRFPath++) for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) { - if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath)) continue; switch(Bandwidth) @@ -39,9 +38,9 @@ void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) case HT_CHANNEL_WIDTH_20: if(priv->card_8192_version == VERSION_8190_BD || priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later! { - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7); - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021); + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7); + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021); //cosa add for sd3's request 01/23/2008 //rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab); @@ -55,9 +54,9 @@ void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) case HT_CHANNEL_WIDTH_20_40: if(priv->card_8192_version == VERSION_8190_BD ||priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later! { - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff); - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1); + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff); + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1); } else @@ -80,43 +79,43 @@ void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) * Output: NONE * Return: NONE *---------------------------------------------------------------------------*/ -RT_STATUS PHY_RF8256_Config(struct net_device* dev) +RT_STATUS PHY_RF8256_Config(struct r8192_priv *priv) { - struct r8192_priv *priv = ieee80211_priv(dev); // Initialize general global value // RT_STATUS rtStatus = RT_STATUS_SUCCESS; // TODO: Extend RF_PATH_C and RF_PATH_D in the future priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH; // Config BB and RF - rtStatus = phy_RF8256_Config_ParaFile(dev); + rtStatus = phy_RF8256_Config_ParaFile(priv); return rtStatus; } + /*-------------------------------------------------------------------------- * Overview: Interface to config 8256 * Input: struct net_device* dev * Output: NONE * Return: NONE *---------------------------------------------------------------------------*/ -RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) +RT_STATUS phy_RF8256_Config_ParaFile(struct r8192_priv *priv) { u32 u4RegValue = 0; u8 eRFPath; RT_STATUS rtStatus = RT_STATUS_SUCCESS; BB_REGISTER_DEFINITION_T *pPhyReg; - struct r8192_priv *priv = ieee80211_priv(dev); u32 RegOffSetToBeCheck = 0x3; u32 RegValueToBeCheck = 0x7f1; u32 RF3_Final_Value = 0; u8 ConstRetryTimes = 5, RetryTimes = 5; u8 ret = 0; + //3//----------------------------------------------------------------- //3// <2> Initialize RF //3//----------------------------------------------------------------- for(eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath NumTotalRFPath; eRFPath++) { - if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath)) continue; pPhyReg = &priv->PHYRegDef[eRFPath]; @@ -126,29 +125,29 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) { case RF90_PATH_A: case RF90_PATH_C: - u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV); + u4RegValue = rtl8192_QueryBBReg(priv, pPhyReg->rfintfs, bRFSI_RFENV); break; case RF90_PATH_B : case RF90_PATH_D: - u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16); + u4RegValue = rtl8192_QueryBBReg(priv, pPhyReg->rfintfs, bRFSI_RFENV<<16); break; } /*----Set RF_ENV enable----*/ - rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1); + rtl8192_setBBreg(priv, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1); /*----Set RF_ENV output high----*/ - rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); + rtl8192_setBBreg(priv, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); /* Set bit number of Address and Data for RF register */ - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? + rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 + rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf); + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf); /*----Check RF block (for FPGA platform only)----*/ // TODO: this function should be removed on ASIC , Emily 2007.2.2 - rtStatus = rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath); + rtStatus = rtl8192_phy_checkBBAndRF(priv, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath); if(rtStatus!= RT_STATUS_SUCCESS) { RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath); @@ -163,8 +162,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) case RF90_PATH_A: while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) { - ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); - RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); RetryTimes--; } @@ -172,8 +171,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) case RF90_PATH_B: while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) { - ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); - RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); RetryTimes--; } @@ -181,8 +180,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) case RF90_PATH_C: while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) { - ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); - RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); RetryTimes--; } @@ -190,8 +189,8 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) case RF90_PATH_D: while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0) { - ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath); - RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); + ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath); + RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); RetryTimes--; } @@ -203,11 +202,11 @@ RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev) { case RF90_PATH_A: case RF90_PATH_C: - rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue); + rtl8192_setBBreg(priv, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue); break; case RF90_PATH_B : case RF90_PATH_D: - rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue); + rtl8192_setBBreg(priv, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue); break; } @@ -227,10 +226,9 @@ phy_RF8256_Config_ParaFile_Fail: } -void PHY_SetRF8256CCKTxPower(struct net_device* dev, u8 powerlevel) +void PHY_SetRF8256CCKTxPower(struct r8192_priv *priv, u8 powerlevel) { u32 TxAGC=0; - struct r8192_priv *priv = ieee80211_priv(dev); TxAGC = powerlevel; if(priv->bDynamicTxLowPower == true)//cosa 04282008 for cck long range @@ -242,13 +240,12 @@ void PHY_SetRF8256CCKTxPower(struct net_device* dev, u8 powerlevel) } if(TxAGC > 0x24) TxAGC = 0x24; - rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC); + rtl8192_setBBreg(priv, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC); } -void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel) +void PHY_SetRF8256OFDMTxPower(struct r8192_priv *priv, u8 powerlevel) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 writeVal, powerBase0, powerBase1, writeVal_tmp; u8 index = 0; @@ -290,7 +287,7 @@ void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel) { writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0; } - rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal); + rtl8192_setBBreg(priv, RegOffset[index], 0x7f7f7f7f, writeVal); } } @@ -356,22 +353,22 @@ SetRFPowerState8190(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) write_nic_byte(priv, ANAPAR, 0x37);//160MHz mdelay(1); //enable clock 80/88 MHz - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x4, 0x1); // 0x880[2] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x4, 0x1); // 0x880[2] priv->bHwRfOffAction = 0; //RF-A, RF-B //enable RF-Chip A/B - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4] + rtl8192_setBBreg(priv, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4] //analog to digital on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] //digital to analog on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3] //rx antenna on - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0] + rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0] //rx antenna on - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0] + rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0] //analog to digital part2 on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5] } diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.h b/drivers/staging/rtl8192e/r8190_rtl8256.h index d9347fa..e3297ec 100644 --- a/drivers/staging/rtl8192e/r8190_rtl8256.h +++ b/drivers/staging/rtl8192e/r8190_rtl8256.h @@ -12,15 +12,15 @@ #define RTL819X_TOTAL_RF_PATH 2 /* for 8192E */ -void PHY_SetRF8256Bandwidth(struct net_device *dev, +void PHY_SetRF8256Bandwidth(struct r8192_priv *priv, HT_CHANNEL_WIDTH Bandwidth); -RT_STATUS PHY_RF8256_Config(struct net_device *dev); +RT_STATUS PHY_RF8256_Config(struct r8192_priv *priv); -RT_STATUS phy_RF8256_Config_ParaFile(struct net_device *dev); +RT_STATUS phy_RF8256_Config_ParaFile(struct r8192_priv *priv); -void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel); -void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel); +void PHY_SetRF8256CCKTxPower(struct r8192_priv *priv, u8 powerlevel); +void PHY_SetRF8256OFDMTxPower(struct r8192_priv *priv, u8 powerlevel); bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index 9500898..50480ac 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -752,18 +752,18 @@ void PHY_SetRtl8192eRfOff(struct net_device* dev) struct r8192_priv *priv = ieee80211_priv(dev); //disable RF-Chip A/B - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); + rtl8192_setBBreg(priv, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); //analog to digital off, for power save - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x0); + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x0); //digital to analog off, for power save - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x18, 0x0); //rx antenna off - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0); + rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0xf, 0x0); //rx antenna off - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0); + rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0xf, 0x0); //analog to digital part2 off, for power save - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x4, 0x0); + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x60, 0x0); + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x4, 0x0); // Analog parameter!!Change bias and Lbus control. write_nic_byte(priv, ANAPAR_FOR_8192PciE, 0x07); @@ -2659,7 +2659,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) //3// Initialize BB before MAC //3// RT_TRACE(COMP_INIT, "BB Config Start!\n"); - rtStatus = rtl8192_BBConfig(dev); + rtStatus = rtl8192_BBConfig(priv); if(rtStatus != RT_STATUS_SUCCESS) { RT_TRACE(COMP_ERR, "BB Config failed\n"); @@ -2768,11 +2768,11 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) //2======================================================= // Set PHY related configuration defined in MAC register bank //2======================================================= - rtl8192_phy_configmac(dev); + rtl8192_phy_configmac(priv); if (priv->card_8192_version > (u8) VERSION_8190_BD) { - rtl8192_phy_getTxPower(dev); - rtl8192_phy_setTxPower(dev, priv->chan); + rtl8192_phy_getTxPower(priv); + rtl8192_phy_setTxPower(priv, priv->chan); } //if D or C cut @@ -2811,7 +2811,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) if(priv->ResetProgress == RESET_TYPE_NORESET) { RT_TRACE(COMP_INIT, "RF Config Started!\n"); - rtStatus = rtl8192_phy_RFConfig(dev); + rtStatus = rtl8192_phy_RFConfig(priv); if(rtStatus != RT_STATUS_SUCCESS) { RT_TRACE(COMP_ERR, "RF Config failed\n"); @@ -2819,11 +2819,11 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) } RT_TRACE(COMP_INIT, "RF Config Finished!\n"); } - rtl8192_phy_updateInitGain(dev); + rtl8192_phy_updateInitGain(priv); /*---- Set CCK and OFDM Block "ON"----*/ - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1); - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1); + rtl8192_setBBreg(priv, rFPGA0_RFMOD, bCCKEn, 0x1); + rtl8192_setBBreg(priv, rFPGA0_RFMOD, bOFDMEn, 0x1); //Enable Led write_nic_byte(priv, 0x87, 0x0); @@ -2864,8 +2864,8 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) if(priv->IC_Cut >= IC_VersionCut_D) { - tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord); - tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord); + tmpRegA = rtl8192_QueryBBReg(priv, rOFDM0_XATxIQImbalance, bMaskDWord); + tmpRegC = rtl8192_QueryBBReg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord); for(i = 0; itxbbgain_table[i].txbbgain_value) @@ -2877,7 +2877,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev) } } - TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2); + TempCCk = rtl8192_QueryBBReg(priv, rCCK0_TxFilter1, bMaskByte2); for(i=0 ; iieee80211->dev, rfpath)) + if (!rtl8192_phy_CheckIsLegalRFPath(priv, rfpath)) continue; RT_TRACE(COMP_DBG, "pPreviousstats->RxMIMOSignalStrength[rfpath] = %d\n", pprevious_stats->RxMIMOSignalStrength[rfpath]); //Fixed by Jacken 2008-03-20 @@ -4125,7 +4125,7 @@ static void rtl8192_query_rxphystatus( /*2007.08.30 requested by SD3 Jerry */ if (priv->phy_check_reg824 == 0) { - priv->phy_reg824_bit9 = rtl8192_QueryBBReg(priv->ieee80211->dev, rFPGA0_XA_HSSIParameter2, 0x200); + priv->phy_reg824_bit9 = rtl8192_QueryBBReg(priv, rFPGA0_XA_HSSIParameter2, 0x200); priv->phy_check_reg824 = 1; } diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c index 330e9d9..22bcc92 100644 --- a/drivers/staging/rtl8192e/r8192E_dm.c +++ b/drivers/staging/rtl8192e/r8192E_dm.c @@ -586,20 +586,20 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) if(priv->rfa_txpowertrackingindex_real > 4) { priv->rfa_txpowertrackingindex_real--; - rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value); } priv->rfc_txpowertrackingindex--; if(priv->rfc_txpowertrackingindex_real > 4) { priv->rfc_txpowertrackingindex_real--; - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); } } else { - rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value); - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value); } } else @@ -610,11 +610,11 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) if(priv->rfc_txpowertrackingindex_real > 4) { priv->rfc_txpowertrackingindex_real--; - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); } } else - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value); } } else @@ -625,15 +625,15 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) { priv->rfa_txpowertrackingindex++; priv->rfa_txpowertrackingindex_real++; - rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value); priv->rfc_txpowertrackingindex++; priv->rfc_txpowertrackingindex_real++; - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); } else { - rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value); - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value); } } else @@ -642,10 +642,10 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) { priv->rfc_txpowertrackingindex++; priv->rfc_txpowertrackingindex_real++; - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); } else - rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value); + rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value); } } if (RF_Type == RF_2T4R) @@ -721,7 +721,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) if(!priv->btxpower_trackingInit) { //Query OFDM default setting - tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord); + tmpRegA = rtl8192_QueryBBReg(priv, rOFDM0_XATxIQImbalance, bMaskDWord); for(i=0; i 13) return; @@ -817,7 +817,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) if(priv->OFDM_index != tmpOFDMindex) { priv->OFDM_index = tmpOFDMindex; - rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]); + rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]); RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n", priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]); } @@ -1014,10 +1014,10 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) { //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash //actually write reg0x02 bit1=0, then bit1=1. - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); - rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); + rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); + rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); + rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); + rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); TM_Trigger = 1; return; } @@ -1049,40 +1049,40 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14) TempVal = (u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[0] + (priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[1]<<8)) ; - rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal); //Write 0xa24 ~ 0xa27 TempVal = 0; TempVal = (u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[2] + (priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[3]<<8) + (priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[4]<<16 )+ (priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[5]<<24)); - rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal); //Write 0xa28 0xa29 TempVal = 0; TempVal = (u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[6] + (priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[7]<<8)) ; - rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal); } else { TempVal = (u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[0] + (priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[1]<<8)) ; - rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal); //Write 0xa24 ~ 0xa27 TempVal = 0; TempVal = (u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[2] + (priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[3]<<8) + (priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[4]<<16 )+ (priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[5]<<24)); - rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal); //Write 0xa28 0xa29 TempVal = 0; TempVal = (u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[6] + (priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[7]<<8)) ; - rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal); } @@ -1099,7 +1099,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH //Write 0xa22 0xa23 TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] + (CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ; - rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal); RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n", rCCK0_TxFilter1, TempVal); //Write 0xa24 ~ 0xa27 @@ -1108,7 +1108,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH (CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) + (CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16 )+ (CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24); - rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal); RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n", rCCK0_TxFilter2, TempVal); //Write 0xa28 0xa29 @@ -1116,7 +1116,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] + (CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ; - rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal); RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n", rCCK0_DebugPort, TempVal); } @@ -1127,7 +1127,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] + (CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ; - rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal); RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n", rCCK0_TxFilter1, TempVal); //Write 0xa24 ~ 0xa27 @@ -1136,7 +1136,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH (CCKSwingTable_Ch14[priv->CCK_index][3]<<8) + (CCKSwingTable_Ch14[priv->CCK_index][4]<<16 )+ (CCKSwingTable_Ch14[priv->CCK_index][5]<<24); - rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal); RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n", rCCK0_TxFilter2, TempVal); //Write 0xa28 0xa29 @@ -1144,7 +1144,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] + (CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ; - rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal); + rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal); RT_TRACE(COMP_POWER_TRACKING,"CCK chnl 14, reg 0x%x = 0x%x\n", rCCK0_DebugPort, TempVal); } @@ -1295,7 +1295,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi( if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled {// FW DIG Off for(i=0; i<3; i++) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. + rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. fw_dig++; dm_digtable.dig_state = DM_STA_DIG_OFF; //fw dig off. } @@ -1332,7 +1332,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( dm_digtable.dig_state = DM_STA_DIG_MAX; // Fw DIG On. for(i=0; i<3; i++) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite. + rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite. dm_digtable.dig_algorithm_switch = 0; } @@ -1367,7 +1367,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( dm_digtable.dig_state = DM_STA_DIG_OFF; // 1.1 DIG Off. - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. + rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. // 1.2 Set initial gain. write_nic_byte(priv, rOFDM0_XAAGCCore1, 0x17); @@ -1451,7 +1451,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( //PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346); // 2.5 DIG On. - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite. + rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite. } @@ -2227,8 +2227,8 @@ static void dm_rxpath_sel_byrssi(struct net_device * dev) //record the enabled rssi threshold DM_RxPathSelTable.rf_enable_rssi_th[min_rssi_index] = tmp_max_rssi+5; //disable the BB Rx path, OFDM - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<= DM_RxPathSelTable.rf_enable_rssi_th[i]) { //enable the BB Rx path - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<ieee80211->current_network.channel); - rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel); + rtl8192_phy_setTxPower(priv, priv->ieee80211->current_network.channel); } priv->bLastDTPFlag_High = priv->bDynamicTxHighPower; diff --git a/drivers/staging/rtl8192e/r819xE_phy.c b/drivers/staging/rtl8192e/r819xE_phy.c index 44e1123..e8a8b342 100644 --- a/drivers/staging/rtl8192e/r819xE_phy.c +++ b/drivers/staging/rtl8192e/r819xE_phy.c @@ -564,8 +564,9 @@ static u32 Rtl8192PciERadioD_Array[RadioD_ArrayLength] = { /*************************Define local function prototype**********************/ -static u32 phy_FwRFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset); -static void phy_FwRFSerialWrite(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset,u32 Data); +static u32 phy_FwRFSerialRead(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 Offset); +static void phy_FwRFSerialWrite(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); + /*************************Define local function prototype**********************/ /****************************************************************************** *function: This function read BB parameters from Header file we gen, @@ -590,10 +591,9 @@ static u32 rtl8192_CalculateBitShift(u32 dwBitMask) * output: none * return: 0(illegal, false), 1(legal,true) * ***************************************************************************/ -u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath) +u8 rtl8192_phy_CheckIsLegalRFPath(struct r8192_priv *priv, u32 eRFPath) { u8 ret = 1; - struct r8192_priv *priv = ieee80211_priv(dev); if (priv->rf_type == RF_2T4R) ret = 0; @@ -617,9 +617,8 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath) * return: none * notice: * ****************************************************************************/ -void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData) +void rtl8192_setBBreg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask, u32 dwData) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 OriginalValue, BitShift, NewValue; if(dwBitMask!= bMaskDWord) @@ -640,9 +639,8 @@ void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 * return: u32 Data //the readback register value * notice: * ****************************************************************************/ -u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask) +u32 rtl8192_QueryBBReg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 OriginalValue, BitShift; OriginalValue = read_nic_dword(priv, dwRegAddr); @@ -658,9 +656,9 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask) * return: u32 readback value * notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information. * ****************************************************************************/ -static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset) +static u32 rtl8192_phy_RFSerialRead(struct r8192_priv *priv, + RF90_RADIO_PATH_E eRFPath, u32 Offset) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 ret = 0; u32 NewOffset = 0; BB_REGISTER_DEFINITION_T* pPhyReg = &priv->PHYRegDef[eRFPath]; @@ -670,12 +668,12 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR //switch page for 8256 RF IC //analog to digital off, for protection - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] if (Offset >= 31) { priv->RfReg0Value[eRFPath] |= 0x140; //Switch to Reg_Mode2 for Reg 31-45 - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); + rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); //modify offset NewOffset = Offset -30; } @@ -684,7 +682,7 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR priv->RfReg0Value[eRFPath] |= 0x100; priv->RfReg0Value[eRFPath] &= (~0x40); //Switch to Reg_Mode 1 for Reg16-30 - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); + rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); NewOffset = Offset - 15; } @@ -692,30 +690,30 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR NewOffset = Offset; //put desired read addr to LSSI control Register - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset); + rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset); //Issue a posedge trigger // - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); + rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); + rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); // TODO: we should not delay such a long time. Ask help from SD3 msleep(1); - ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); + ret = rtl8192_QueryBBReg(priv, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); // Switch back to Reg_Mode0; priv->RfReg0Value[eRFPath] &= 0xebf; rtl8192_setBBreg( - dev, + priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); //analog to digital on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] return ret; } @@ -740,28 +738,29 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eR * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) *------------------------------------------------------------------ * ****************************************************************************/ -static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data) +static void rtl8192_phy_RFSerialWrite(struct r8192_priv *priv, + RF90_RADIO_PATH_E eRFPath, u32 Offset, + u32 Data) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 DataAndAddr = 0, NewOffset = 0; BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; Offset &= 0x3f; //analog to digital off, for protection - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] if (Offset >= 31) { priv->RfReg0Value[eRFPath] |= 0x140; - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); + rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); NewOffset = Offset - 30; } else if (Offset >= 16) { priv->RfReg0Value[eRFPath] |= 0x100; priv->RfReg0Value[eRFPath] &= (~0x40); - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); + rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); NewOffset = Offset - 15; } else @@ -771,7 +770,7 @@ static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E DataAndAddr = (Data<<16) | (NewOffset&0x3f); // Write Operation - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); + rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); if(Offset==0x0) @@ -782,19 +781,18 @@ static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E { priv->RfReg0Value[eRFPath] &= 0xebf; rtl8192_setBBreg( - dev, + priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); } //analog to digital on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] } /****************************************************************************** *function: This function set specific bits to RF register - * input: net_device dev - * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * input: RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D * u32 RegAddr //target addr to be modified * u32 BitMask //taget bit pos in the addr to be modified * u32 Data //value to be write @@ -802,13 +800,13 @@ static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E * return: none * notice: * ****************************************************************************/ -void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data) +void rtl8192_phy_SetRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, + u32 RegAddr, u32 BitMask, u32 Data) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 Original_Value, BitShift, New_Value; // u8 time = 0; - if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath)) return; if (priv->eRFPowerState != eRfOn && !priv->being_init_adapter) return; @@ -819,13 +817,13 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 { if (BitMask != bMask12Bits) // RF data is 12 bits only { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); + Original_Value = phy_FwRFSerialRead(priv, eRFPath, RegAddr); BitShift = rtl8192_CalculateBitShift(BitMask); New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value); + phy_FwRFSerialWrite(priv, eRFPath, RegAddr, New_Value); }else - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data); + phy_FwRFSerialWrite(priv, eRFPath, RegAddr, Data); udelay(200); } @@ -833,13 +831,13 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 { if (BitMask != bMask12Bits) // RF data is 12 bits only { - Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); + Original_Value = rtl8192_phy_RFSerialRead(priv, eRFPath, RegAddr); BitShift = rtl8192_CalculateBitShift(BitMask); New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); - rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value); + rtl8192_phy_RFSerialWrite(priv, eRFPath, RegAddr, New_Value); }else - rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data); + rtl8192_phy_RFSerialWrite(priv, eRFPath, RegAddr, Data); } //up(&priv->rf_sem); } @@ -853,23 +851,24 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 * return: u32 Data //the readback register value * notice: * ****************************************************************************/ -u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask) +u32 rtl8192_phy_QueryRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, + u32 RegAddr, u32 BitMask) { u32 Original_Value, Readback_Value, BitShift; - struct r8192_priv *priv = ieee80211_priv(dev); - if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + + if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath)) return 0; if (priv->eRFPowerState != eRfOn && !priv->being_init_adapter) return 0; down(&priv->rf_sem); if (priv->Rf_Mode == RF_OP_By_FW) { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); + Original_Value = phy_FwRFSerialRead(priv, eRFPath, RegAddr); udelay(200); } else { - Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); + Original_Value = rtl8192_phy_RFSerialRead(priv, eRFPath, RegAddr); } BitShift = rtl8192_CalculateBitShift(BitMask); @@ -886,12 +885,9 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3 * return: none * notice: * ***************************************************************************/ -static u32 phy_FwRFSerialRead( - struct net_device* dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset ) +static u32 phy_FwRFSerialRead(struct r8192_priv *priv, + RF90_RADIO_PATH_E eRFPath, u32 Offset) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 Data = 0; u8 time = 0; //DbgPrint("FW RF CTRL\n\r"); @@ -944,14 +940,9 @@ static u32 phy_FwRFSerialRead( * return: none * notice: * ***************************************************************************/ -static void -phy_FwRFSerialWrite( - struct net_device* dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset, - u32 Data ) +static void phy_FwRFSerialWrite(struct r8192_priv *priv, + RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data) { - struct r8192_priv *priv = ieee80211_priv(dev); u8 time = 0; //DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data); @@ -1002,11 +993,10 @@ phy_FwRFSerialWrite( * notice: BB parameters may change all the time, so please make * sure it has been synced with the newest. * ***************************************************************************/ -void rtl8192_phy_configmac(struct net_device* dev) +void rtl8192_phy_configmac(struct r8192_priv *priv) { u32 dwArrayLen = 0, i = 0; u32* pdwArray = NULL; - struct r8192_priv *priv = ieee80211_priv(dev); #ifdef TO_DO_LIST if(Adapter->bInHctTest) { @@ -1038,7 +1028,7 @@ if(Adapter->bInHctTest) //DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n", // ptrArray[i], ptrArray[i+1], ptrArray[i+2]); } - rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]); + rtl8192_setBBreg(priv, pdwArray[i], pdwArray[i+1], pdwArray[i+2]); } } @@ -1051,14 +1041,13 @@ if(Adapter->bInHctTest) * sure it has been synced with the newest. * ***************************************************************************/ -void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType) +void rtl8192_phyConfigBB(struct r8192_priv *priv, u8 ConfigType) { int i; //u8 ArrayLength; u32* Rtl819XPHY_REGArray_Table = NULL; u32* Rtl819XAGCTAB_Array_Table = NULL; u16 AGCTAB_ArrayLen, PHY_REGArrayLen = 0; - struct r8192_priv *priv = ieee80211_priv(dev); #ifdef TO_DO_LIST u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL; if(Adapter->bInHctTest) @@ -1098,7 +1087,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType) { for (i=0; iPHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) @@ -1234,9 +1222,10 @@ static void rtl8192_InitBBRFRegDef(struct net_device* dev) * return: return whether BB and RF is ok(0:OK; 1:Fail) * notice: This function may be removed in the ASIC * ***************************************************************************/ -RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath) +RT_STATUS rtl8192_phy_checkBBAndRF(struct r8192_priv *priv, + HW90_BLOCK_E CheckBlock, + RF90_RADIO_PATH_E eRFPath) { - struct r8192_priv *priv = ieee80211_priv(dev); // BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; RT_STATUS ret = RT_STATUS_SUCCESS; u32 i, CheckTimes = 4, dwRegRead = 0; @@ -1268,10 +1257,10 @@ RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlo case HW90_BLOCK_RF: WriteData[i] &= 0xfff; - rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]); + rtl8192_phy_SetRFReg(priv, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]); // TODO: we should not delay for such a long time. Ask SD3 mdelay(10); - dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord); + dwRegRead = rtl8192_phy_QueryRFReg(priv, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord); mdelay(10); break; @@ -1304,10 +1293,10 @@ RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlo * notice: Initialization value may change all the time, so please make * sure it has been synced with the newest. * ***************************************************************************/ -static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev) +static RT_STATUS rtl8192_BB_Config_ParaFile(struct r8192_priv *priv) { - struct r8192_priv *priv = ieee80211_priv(dev); RT_STATUS rtStatus = RT_STATUS_SUCCESS; + u8 bRegValue = 0, eCheckItem = 0; u32 dwRegValue = 0; /************************************** @@ -1326,7 +1315,7 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev) // TODO: this function should be removed on ASIC , Emily 2007.2.2 for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++) { - rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path + rtStatus = rtl8192_phy_checkBBAndRF(priv, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path if(rtStatus != RT_STATUS_SUCCESS) { RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1); @@ -1334,10 +1323,10 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev) } } /*---- Set CCK and OFDM Block "OFF"----*/ - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0); + rtl8192_setBBreg(priv, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0); /*----BB Register Initilazation----*/ //==m==>Set PHY REG From Header<==m== - rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG); + rtl8192_phyConfigBB(priv, BaseBand_Config_PHY_REG); /*----Set BB reset de-Active----*/ dwRegValue = read_nic_dword(priv, CPU_GEN); @@ -1345,7 +1334,7 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev) /*----BB AGC table Initialization----*/ //==m==>Set PHY REG From Header<==m== - rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB); + rtl8192_phyConfigBB(priv, BaseBand_Config_AGC_TAB); if (priv->card_8192_version > VERSION_8190_BD) { @@ -1358,13 +1347,13 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev) } else dwRegValue = 0x0; //Antenna gain offset doesn't make sense in RF 1T2R. - rtl8192_setBBreg(dev, rFPGA0_TxGainStage, + rtl8192_setBBreg(priv, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), dwRegValue); //XSTALLCap dwRegValue = priv->CrystalCap; - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap92x, dwRegValue); + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, bXtalCap92x, dwRegValue); } // Check if the CCK HighPower is turned ON. @@ -1380,12 +1369,12 @@ static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev) * notice: Initialization value may change all the time, so please make * sure it has been synced with the newest. * ***************************************************************************/ -RT_STATUS rtl8192_BBConfig(struct net_device* dev) +RT_STATUS rtl8192_BBConfig(struct r8192_priv *priv) { - rtl8192_InitBBRFRegDef(dev); + rtl8192_InitBBRFRegDef(priv); //config BB&RF. As hardCode based initialization has not been well //implemented, so use file first.FIXME:should implement it for hardcode? - return rtl8192_BB_Config_ParaFile(dev); + return rtl8192_BB_Config_ParaFile(priv); } /****************************************************************************** @@ -1394,10 +1383,8 @@ RT_STATUS rtl8192_BBConfig(struct net_device* dev) * output: none * return: none * ***************************************************************************/ -void rtl8192_phy_getTxPower(struct net_device* dev) +void rtl8192_phy_getTxPower(struct r8192_priv *priv) { - struct r8192_priv *priv = ieee80211_priv(dev); - priv->MCSTxPowerLevelOriginalOffset[0] = read_nic_dword(priv, rTxAGC_Rate18_06); priv->MCSTxPowerLevelOriginalOffset[1] = @@ -1435,9 +1422,8 @@ void rtl8192_phy_getTxPower(struct net_device* dev) * output: none * return: none * ***************************************************************************/ -void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel) +void rtl8192_phy_setTxPower(struct r8192_priv *priv, u8 channel) { - struct r8192_priv *priv = ieee80211_priv(dev); u8 powerlevel = 0,powerlevelOFDM24G = 0; char ant_pwr_diff; u32 u4RegValue; @@ -1477,7 +1463,7 @@ void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel) priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]); - rtl8192_setBBreg(dev, rFPGA0_TxGainStage, + rtl8192_setBBreg(priv, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue); } } @@ -1532,8 +1518,8 @@ void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel) pHalData->CurrentCckTxPwrIdx = powerlevel; pHalData->CurrentOfdm24GTxPwrIdx = powerlevelOFDM24G; #endif - PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement - PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); + PHY_SetRF8256CCKTxPower(priv, powerlevel); //need further implement + PHY_SetRF8256OFDMTxPower(priv, powerlevelOFDM24G); } /****************************************************************************** @@ -1542,9 +1528,9 @@ void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel) * output: none * return: only 8256 is supported * ***************************************************************************/ -RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev) +RT_STATUS rtl8192_phy_RFConfig(struct r8192_priv *priv) { - return PHY_RF8256_Config(dev); + return PHY_RF8256_Config(priv); } /****************************************************************************** @@ -1553,7 +1539,7 @@ RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev) * output: none * return: As Windows has not implemented this, wait for complement * ***************************************************************************/ -void rtl8192_phy_updateInitGain(struct net_device* dev) +void rtl8192_phy_updateInitGain(struct r8192_priv *priv) { } @@ -1564,7 +1550,8 @@ void rtl8192_phy_updateInitGain(struct net_device* dev) * return: return code show if RF configuration is successful(0:pass, 1:fail) * Note: Delay may be required for RF configuration * ***************************************************************************/ -u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath) +u8 rtl8192_phy_ConfigRFWithHeaderFile(struct r8192_priv *priv, + RF90_RADIO_PATH_E eRFPath) { int i; @@ -1579,7 +1566,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E msleep(100); continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioA_Array[i], bMask12Bits, Rtl819XRadioA_Array[i+1]); + rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioA_Array[i], bMask12Bits, Rtl819XRadioA_Array[i+1]); //msleep(1); } @@ -1591,7 +1578,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E msleep(100); continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioB_Array[i], bMask12Bits, Rtl819XRadioB_Array[i+1]); + rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioB_Array[i], bMask12Bits, Rtl819XRadioB_Array[i+1]); //msleep(1); } @@ -1603,7 +1590,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E msleep(100); continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioC_Array[i], bMask12Bits, Rtl819XRadioC_Array[i+1]); + rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioC_Array[i], bMask12Bits, Rtl819XRadioC_Array[i+1]); //msleep(1); } @@ -1615,7 +1602,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E msleep(100); continue; } - rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioD_Array[i], bMask12Bits, Rtl819XRadioD_Array[i+1]); + rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioD_Array[i], bMask12Bits, Rtl819XRadioD_Array[i+1]); //msleep(1); } @@ -1635,14 +1622,13 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E * return: none * Note: * ***************************************************************************/ -static void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) +static void rtl8192_SetTxPowerLevel(struct r8192_priv *priv, u8 channel) { - struct r8192_priv *priv = ieee80211_priv(dev); u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; - PHY_SetRF8256CCKTxPower(dev, powerlevel); - PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); + PHY_SetRF8256CCKTxPower(priv, powerlevel); + PHY_SetRF8256OFDMTxPower(priv, powerlevelOFDM24G); } /**************************************************************************************** @@ -1701,9 +1687,9 @@ static u8 rtl8192_phy_SetSwChnlCmdArray( * return: true if finished, false otherwise * Note: Wait for simpler function to replace it //wb * ***************************************************************************/ -static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u8* step, u32* delay) +static u8 rtl8192_phy_SwChnlStepByStep(struct r8192_priv *priv, u8 channel, + u8* stage, u8* step, u32* delay) { - struct r8192_priv *priv = ieee80211_priv(dev); // PCHANNEL_ACCESS_SETTING pChnlAccessSetting; SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; u32 PreCommonCmdCnt; @@ -1792,7 +1778,7 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* s { case CmdID_SetTxPowerLevel: if(priv->card_8192_version > (u8)VERSION_8190_BD) //xiong: consider it later! - rtl8192_SetTxPowerLevel(dev,channel); + rtl8192_SetTxPowerLevel(priv, channel); break; case CmdID_WritePortUlong: write_nic_dword(priv, CurrentCmd->Para1, CurrentCmd->Para2); @@ -1805,7 +1791,7 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* s break; case CmdID_RF_WriteReg: for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bMask12Bits, CurrentCmd->Para2<<7); + rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bMask12Bits, CurrentCmd->Para2<<7); break; default: break; @@ -1828,12 +1814,11 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* s * return: noin * Note: We should not call this function directly * ***************************************************************************/ -static void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) +static void rtl8192_phy_FinishSwChnlNow(struct r8192_priv *priv, u8 channel) { - struct r8192_priv *priv = ieee80211_priv(dev); u32 delay = 0; - while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) + while (!rtl8192_phy_SwChnlStepByStep(priv, channel, &priv->SwChnlStage, &priv->SwChnlStep, &delay)) { if(delay>0) msleep(delay);//or mdelay? need further consideration @@ -1848,16 +1833,13 @@ static void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) * output: none * return: noin * ***************************************************************************/ -void rtl8192_SwChnl_WorkItem(struct net_device *dev) +void rtl8192_SwChnl_WorkItem(struct r8192_priv *priv) { - - struct r8192_priv *priv = ieee80211_priv(dev); - RT_TRACE(COMP_TRACE, "==> SwChnlCallback819xUsbWorkItem()\n"); RT_TRACE(COMP_TRACE, "=====>--%s(), set chan:%d, priv:%p\n", __FUNCTION__, priv->chan, priv); - rtl8192_phy_FinishSwChnlNow(dev , priv->chan); + rtl8192_phy_FinishSwChnlNow(priv, priv->chan); RT_TRACE(COMP_TRACE, "<== SwChnlCallback819xUsbWorkItem()\n"); } @@ -1916,19 +1898,16 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel) priv->SwChnlStage=0; priv->SwChnlStep=0; -// schedule_work(&(priv->SwChnlWorkItem)); -// rtl8192_SwChnl_WorkItem(dev); - if(priv->up) { -// queue_work(priv->priv_wq,&(priv->SwChnlWorkItem)); - rtl8192_SwChnl_WorkItem(dev); - } + if (priv->up) + rtl8192_SwChnl_WorkItem(priv); + priv->SwChnlInProgress = false; return true; } -static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct net_device *dev ) +static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct r8192_priv *priv) { - struct r8192_priv *priv = ieee80211_priv(dev); + struct net_device *dev = priv->ieee80211->dev; switch(priv->CurrentChannelBW) { @@ -1987,9 +1966,9 @@ static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct net_device *dev ) } } -static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct net_device *dev) +static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct r8192_priv *priv) { - struct r8192_priv *priv = ieee80211_priv(dev); + struct net_device *dev = priv->ieee80211->dev; if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) priv->bcck_in_ch14 = TRUE; @@ -2016,15 +1995,14 @@ static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct net_device *dev) dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); } -static void CCK_Tx_Power_Track_BW_Switch(struct net_device *dev) +static void CCK_Tx_Power_Track_BW_Switch(struct r8192_priv *priv) { - struct r8192_priv *priv = ieee80211_priv(dev); //if(pHalData->bDcut == TRUE) if(priv->IC_Cut >= IC_VersionCut_D) - CCK_Tx_Power_Track_BW_Switch_TSSI(dev); + CCK_Tx_Power_Track_BW_Switch_TSSI(priv); else - CCK_Tx_Power_Track_BW_Switch_ThermalMeter(dev); + CCK_Tx_Power_Track_BW_Switch_ThermalMeter(priv); } @@ -2039,10 +2017,8 @@ static void CCK_Tx_Power_Track_BW_Switch(struct net_device *dev) * Note: I doubt whether SetBWModeInProgress flag is necessary as we can * test whether current work in the queue or not.//do I? * ***************************************************************************/ -void rtl8192_SetBWModeWorkItem(struct net_device *dev) +void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv) { - - struct r8192_priv *priv = ieee80211_priv(dev); u8 regBwOpMode; RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n", @@ -2081,8 +2057,8 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) { case HT_CHANNEL_WIDTH_20: // Add by Vivi 20071119 - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); - rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(priv, rFPGA0_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(priv, rFPGA1_RFMOD, bRFMOD, 0x0); // rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1); // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207 @@ -2096,14 +2072,14 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) write_nic_dword(priv, rCCK0_DebugPort, 0x00000204); } else - CCK_Tx_Power_Track_BW_Switch(dev); + CCK_Tx_Power_Track_BW_Switch(priv); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1); + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x00100000, 1); break; case HT_CHANNEL_WIDTH_20_40: // Add by Vivi 20071119 - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); - rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(priv, rFPGA0_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(priv, rFPGA1_RFMOD, bRFMOD, 0x1); //rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); //rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0); //rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); @@ -2119,14 +2095,14 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) write_nic_dword(priv, rCCK0_DebugPort, 0x00000409); } else - CCK_Tx_Power_Track_BW_Switch(dev); + CCK_Tx_Power_Track_BW_Switch(priv); // Set Control channel to upper or lower. These settings are required only for 40MHz - rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); - rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); + rtl8192_setBBreg(priv, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); + rtl8192_setBBreg(priv, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0); + rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x00100000, 0); break; default: RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n" ,priv->CurrentChannelBW); @@ -2136,7 +2112,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 //<3>Set RF related register - PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); + PHY_SetRF8256Bandwidth(priv, priv->CurrentChannelBW); atomic_dec(&(priv->ieee80211->atm_swbw)); priv->SetBWModeInProgress= false; @@ -2176,7 +2152,7 @@ void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EX //queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem)); // schedule_work(&(priv->SetBWModeWorkItem)); - rtl8192_SetBWModeWorkItem(dev); + rtl8192_SetBWModeWorkItem(priv); } @@ -2198,13 +2174,13 @@ void InitialGain819xPci(struct net_device *dev, u8 Operation) initial_gain = SCAN_RX_INITIAL_GAIN;//pHalData->DefaultInitialGain[0];// BitMask = bMaskByte0; if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF - priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask); - priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask); - priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask); - priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask); + rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // FW DIG OFF + priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XAAGCCore1, BitMask); + priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XBAGCCore1, BitMask); + priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XCAGCCore1, BitMask); + priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XDAGCCore1, BitMask); BitMask = bMaskByte2; - priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask); + priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(priv, rCCK0_CCA, BitMask); RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1); RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1); @@ -2224,14 +2200,14 @@ void InitialGain819xPci(struct net_device *dev, u8 Operation) RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n"); BitMask = 0x7f; //Bit0~ Bit6 if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF + rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // FW DIG OFF - rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1); - rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1); - rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1); - rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1); + rtl8192_setBBreg(priv, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1); + rtl8192_setBBreg(priv, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1); + rtl8192_setBBreg(priv, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1); + rtl8192_setBBreg(priv, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1); BitMask = bMaskByte2; - rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca); + rtl8192_setBBreg(priv, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca); RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1); RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1); @@ -2239,11 +2215,11 @@ void InitialGain819xPci(struct net_device *dev, u8 Operation) RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1); RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca); - rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel); + rtl8192_phy_setTxPower(priv, priv->ieee80211->current_network.channel); if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON + rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1); // FW DIG ON break; default: RT_TRACE(COMP_SCAN, "Unknown IG Operation.\n"); diff --git a/drivers/staging/rtl8192e/r819xE_phy.h b/drivers/staging/rtl8192e/r819xE_phy.h index c676c3a..46008ee 100644 --- a/drivers/staging/rtl8192e/r819xE_phy.h +++ b/drivers/staging/rtl8192e/r819xE_phy.h @@ -82,39 +82,39 @@ typedef enum _RF90_RADIO_PATH { #define bMaskLWord 0x0000ffff #define bMaskDWord 0xffffffff -u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath); +u8 rtl8192_phy_CheckIsLegalRFPath(struct r8192_priv *priv, u32 eRFPath); -void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, +void rtl8192_setBBreg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask, u32 dwData); -u32 rtl8192_QueryBBReg(struct net_device *dev, u32 dwRegAddr, +u32 rtl8192_QueryBBReg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask); -void rtl8192_phy_SetRFReg(struct net_device *dev, +void rtl8192_phy_SetRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data); -u32 rtl8192_phy_QueryRFReg(struct net_device *dev, +u32 rtl8192_phy_QueryRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask); -void rtl8192_phy_configmac(struct net_device *dev); +void rtl8192_phy_configmac(struct r8192_priv *priv); -void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType); +void rtl8192_phyConfigBB(struct r8192_priv *priv, u8 ConfigType); -RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device *dev, +RT_STATUS rtl8192_phy_checkBBAndRF(struct r8192_priv *priv, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath); -RT_STATUS rtl8192_BBConfig(struct net_device *dev); +RT_STATUS rtl8192_BBConfig(struct r8192_priv *priv); -void rtl8192_phy_getTxPower(struct net_device *dev); +void rtl8192_phy_getTxPower(struct r8192_priv *priv); -void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel); +void rtl8192_phy_setTxPower(struct r8192_priv *priv, u8 channel); -RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev); +RT_STATUS rtl8192_phy_RFConfig(struct r8192_priv *priv); -void rtl8192_phy_updateInitGain(struct net_device* dev); +void rtl8192_phy_updateInitGain(struct r8192_priv *priv); -u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, +u8 rtl8192_phy_ConfigRFWithHeaderFile(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath); u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel); @@ -122,9 +122,9 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel); void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset); -void rtl8192_SwChnl_WorkItem(struct net_device *dev); +void rtl8192_SwChnl_WorkItem(struct r8192_priv *priv); -void rtl8192_SetBWModeWorkItem(struct net_device *dev); +void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv); void InitialGain819xPci(struct net_device *dev, u8 Operation);