From: Peng Fan Date: Sun, 6 Sep 2015 07:02:34 +0000 (+0800) Subject: imx: mx6ul: support mx6ul 9x9 evk board X-Git-Tag: v2015.10-rc4~80 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d9cbb264e8c277af0ae8c55bac01b8564dfc3f9c;p=platform%2Fkernel%2Fu-boot.git imx: mx6ul: support mx6ul 9x9 evk board This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan Cc: Stefano Babic --- diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 8b0120f..b3f7eaf 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -104,6 +104,14 @@ config TARGET_MX6SXSABRESD select DM select DM_THERMAL +config TARGET_MX6UL_9X9_EVK + bool "mx6ul_9x9_evk" + select MX6UL + select CPU_V7 + select DM + select DM_THERMAL + select SUPPORT_SPL + config TARGET_MX6UL_14X14_EVK bool "mx6ul_14x14_evk" select MX6UL diff --git a/board/freescale/mx6ul_14x14_evk/Kconfig b/board/freescale/mx6ul_14x14_evk/Kconfig index 393aca6..eda02c9 100644 --- a/board/freescale/mx6ul_14x14_evk/Kconfig +++ b/board/freescale/mx6ul_14x14_evk/Kconfig @@ -1,4 +1,4 @@ -if TARGET_MX6UL_14X14_EVK +if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK config SYS_BOARD default "mx6ul_14x14_evk" diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index c09d84e..612fb78 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -23,6 +23,9 @@ #include #include #include +#include +#include +#include "../common/pfuze.h" #include #include @@ -210,11 +213,56 @@ struct i2c_pads_info i2c_pad_info1 = { .gp = IMX_GPIO_NR(1, 29), }, }; + +#ifdef CONFIG_POWER +#define I2C_PMIC 0 +int power_init_board(void) +{ + if (is_mx6ul_9x9_evk()) { + struct pmic *pfuze; + int ret; + unsigned int reg, rev_id; + + ret = power_pfuze3000_init(I2C_PMIC); + if (ret) + return ret; + + pfuze = pmic_get("PFUZE3000"); + ret = pmic_probe(pfuze); + if (ret) + return ret; + + pmic_reg_read(pfuze, PFUZE3000_DEVICEID, ®); + pmic_reg_read(pfuze, PFUZE3000_REVID, &rev_id); + printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", + reg, rev_id); + + /* disable Low Power Mode during standby mode */ + pmic_reg_read(pfuze, PFUZE3000_LDOGCTL, ®); + reg |= 0x1; + pmic_reg_write(pfuze, PFUZE3000_LDOGCTL, reg); + + /* SW1B step ramp up time from 2us to 4us/25mV */ + reg = 0x40; + pmic_reg_write(pfuze, PFUZE3000_SW1BCONF, reg); + + /* SW1B mode to APS/PFM */ + reg = 0xc; + pmic_reg_write(pfuze, PFUZE3000_SW1BMODE, reg); + + /* SW1B standby voltage set to 0.975V */ + reg = 0xb; + pmic_reg_write(pfuze, PFUZE3000_SW1BSTBY, reg); + } + + return 0; +} +#endif #endif int dram_init(void) { - gd->ram_size = PHYS_SDRAM_SIZE; + gd->ram_size = imx_ddr_size(); return 0; } @@ -614,6 +662,15 @@ int board_late_init(void) add_board_boot_modes(board_boot_modes); #endif +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + setenv("board_name", "EVK"); + + if (is_mx6ul_9x9_evk()) + setenv("board_rev", "9X9"); + else + setenv("board_rev", "14X14"); +#endif + return 0; } @@ -624,7 +681,10 @@ u32 get_board_rev(void) int checkboard(void) { - puts("Board: MX6UL 14x14 EVK\n"); + if (is_mx6ul_9x9_evk()) + puts("Board: MX6UL 9x9 EVK\n"); + else + puts("Board: MX6UL 14x14 EVK\n"); return 0; } @@ -634,7 +694,76 @@ int checkboard(void) #include #include -const struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { + +static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { + .grp_addds = 0x00000030, + .grp_ddrmode_ctl = 0x00020000, + .grp_b0ds = 0x00000030, + .grp_ctlds = 0x00000030, + .grp_b1ds = 0x00000030, + .grp_ddrpke = 0x00000000, + .grp_ddrmode = 0x00020000, +#ifdef CONFIG_TARGET_MX6UL_9X9_EVK + .grp_ddr_type = 0x00080000, +#else + .grp_ddr_type = 0x000c0000, +#endif +}; + +#ifdef CONFIG_TARGET_MX6UL_9X9_EVK +static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { + .dram_dqm0 = 0x00000030, + .dram_dqm1 = 0x00000030, + .dram_ras = 0x00000030, + .dram_cas = 0x00000030, + .dram_odt0 = 0x00000000, + .dram_odt1 = 0x00000000, + .dram_sdba2 = 0x00000000, + .dram_sdclk_0 = 0x00000030, + .dram_sdqs0 = 0x00003030, + .dram_sdqs1 = 0x00003030, + .dram_reset = 0x00000030, +}; + +static struct mx6_mmdc_calibration mx6_mmcd_calib = { + .p0_mpwldectrl0 = 0x00000000, + .p0_mpdgctrl0 = 0x20000000, + .p0_mprddlctl = 0x4040484f, + .p0_mpwrdlctl = 0x40405247, + .mpzqlp2ctl = 0x1b4700c7, +}; + +static struct mx6_lpddr2_cfg mem_ddr = { + .mem_speed = 800, + .density = 2, + .width = 16, + .banks = 4, + .rowaddr = 14, + .coladdr = 10, + .trcd_lp = 1500, + .trppb_lp = 1500, + .trpab_lp = 2000, + .trasmin = 4250, +}; + +struct mx6_ddr_sysinfo ddr_sysinfo = { + .dsize = 0, + .cs_density = 18, + .ncs = 1, + .cs1_mirror = 0, + .walat = 0, + .ralat = 5, + .mif3_mode = 3, + .bi_on = 1, + .rtt_wr = 0, /* LPDDR2 does not need rtt_wr rtt_nom */ + .rtt_nom = 0, + .sde_to_rst = 0, /* LPDDR2 does not need this field */ + .rst_to_cke = 0x10, /* JEDEC value for LPDDR2: 200us */ + .ddr_type = DDR_TYPE_LPDDR2, +}; + +#else +static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { .dram_dqm0 = 0x00000030, .dram_dqm1 = 0x00000030, .dram_ras = 0x00000030, @@ -648,24 +777,29 @@ const struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = { .dram_reset = 0x00000030, }; -const struct mx6ul_iomux_grp_regs mx6_grp_ioregs = { - .grp_addds = 0x00000030, - .grp_ddrmode_ctl = 0x00020000, - .grp_b0ds = 0x00000030, - .grp_ctlds = 0x00000030, - .grp_b1ds = 0x00000030, - .grp_ddrpke = 0x00000000, - .grp_ddrmode = 0x00020000, - .grp_ddr_type = 0x000c0000, -}; - -const struct mx6_mmdc_calibration mx6_mmcd_calib = { +static struct mx6_mmdc_calibration mx6_mmcd_calib = { .p0_mpwldectrl0 = 0x00070007, .p0_mpdgctrl0 = 0x41490145, .p0_mprddlctl = 0x40404546, .p0_mpwrdlctl = 0x4040524D, }; +struct mx6_ddr_sysinfo ddr_sysinfo = { + .dsize = 0, + .cs_density = 20, + .ncs = 1, + .cs1_mirror = 0, + .rtt_wr = 2, + .rtt_nom = 1, /* RTT_Nom = RZQ/2 */ + .walat = 1, /* Write additional latency */ + .ralat = 5, /* Read additional latency */ + .mif3_mode = 3, /* Command prediction working mode */ + .bi_on = 1, /* Bank interleaving enabled */ + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ + .ddr_type = DDR_TYPE_DDR3, +}; + static struct mx6_ddr3_cfg mem_ddr = { .mem_speed = 800, .density = 4, @@ -678,6 +812,7 @@ static struct mx6_ddr3_cfg mem_ddr = { .trcmin = 4875, .trasmin = 3500, }; +#endif static void ccgr_init(void) { @@ -695,24 +830,8 @@ static void ccgr_init(void) static void spl_dram_init(void) { - struct mx6_ddr_sysinfo sysinfo = { - .dsize = 0, - .cs_density = 20, - .ncs = 1, - .cs1_mirror = 0, - .rtt_wr = 2, - .rtt_nom = 1, /* RTT_Nom = RZQ/2 */ - .walat = 1, /* Write additional latency */ - .ralat = 5, /* Read additional latency */ - .mif3_mode = 3, /* Command prediction working mode */ - .bi_on = 1, /* Bank interleaving enabled */ - .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ - .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ - .ddr_type = DDR_TYPE_DDR3, - }; - mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr); + mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr); } void board_init_f(ulong dummy) diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig new file mode 100644 index 0000000..e54609d --- /dev/null +++ b/configs/mx6ul_9x9_evk_defconfig @@ -0,0 +1,8 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_MX6UL_9X9_EVK=y +CONFIG_SPL=y +CONFIG_CMD_NET=y +CONFIG_CMD_PING=y +CONFIG_CMD_DHCP=y diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 670b1c2..a5c13f7 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -14,12 +14,16 @@ #include "mx6_common.h" #include +#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) + /* SPL options */ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #include "imx6_spl.h" +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #define CONFIG_ROM_UNIFIED_SECTIONS #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO @@ -61,9 +65,13 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 -#endif -#define PHYS_SDRAM_SIZE SZ_512M +/* PMIC only for 9X9 EVK */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE3000 +#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 +#endif #undef CONFIG_CMD_IMLS @@ -75,7 +83,7 @@ "console=ttymxc0\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ - "fdt_file=imx6ul-14x14-evk.dtb\0" \ + "fdt_file=undefined\0" \ "fdt_addr=0x83000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ @@ -129,9 +137,19 @@ "fi; " \ "else " \ "bootz; " \ - "fi;\0" + "fi;\0" \ + "findfdt="\ + "if test $fdt_file = undefined; then " \ + "if test $board_name = EVK && test $board_rev = 9X9; then " \ + "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \ + "if test $board_name = EVK && test $board_rev = 14X14; then " \ + "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \ + "if test $fdt_file = undefined; then " \ + "echo WARNING: Could not determine dtb to use; fi; " \ + "fi;\0" \ #define CONFIG_BOOTCOMMAND \ + "run findfdt;" \ "mmc dev ${mmcdev};" \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \