From: Weijie Gao <weijie.gao@mediatek.com>
Date: Thu, 20 Dec 2018 08:12:54 +0000 (+0800)
Subject: arm: dts: add ethernet related node for MT7623 SoC
X-Git-Tag: v2019.04-rc1~44^2~49
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d9506a6fdd0269f86c7a1fe5bbee7191acc3d1c8;p=platform%2Fkernel%2Fu-boot.git

arm: dts: add ethernet related node for MT7623 SoC

This patch adds ethernet gmac node for MT7623 with MT7530 gigabit switch.

Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
---

diff --git a/arch/arm/dts/mt7623.dtsi b/arch/arm/dts/mt7623.dtsi
index f50f4ef..448d1d7 100644
--- a/arch/arm/dts/mt7623.dtsi
+++ b/arch/arm/dts/mt7623.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/mt7623-power.h>
+#include <dt-bindings/reset/mtk-reset.h>
 #include "skeleton.dtsi"
 
 / {
@@ -248,8 +249,26 @@
 	};
 
 	ethsys: syscon@1b000000 {
-		compatible = "mediatek,mt7623-ethsys";
+		compatible = "mediatek,mt7623-ethsys", "syscon";
 		reg = <0x1b000000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7623-eth", "syscon";
+		reg = <0x1b100000 0x20000>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		power-domains = <&scpsys MT7623_POWER_DOMAIN_ETH>;
+		resets = <&ethsys ETHSYS_FE_RST>,
+			 <&ethsys ETHSYS_MCM_RST>;
+		reset-names = "fe", "mcm";
+		mediatek,ethsys = <&ethsys>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
index 84a77fd..51628bb 100644
--- a/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/dts/mt7623n-bananapi-bpi-r2.dts
@@ -67,6 +67,19 @@
 	};
 };
 
+&eth {
+	status = "okay";
+	mediatek,gmac-id = <0>;
+	phy-mode = "rgmii";
+	mediatek,switch = "mt7530";
+	reset-gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_default>;