From: Stefan Wahren Date: Tue, 7 Mar 2023 18:40:01 +0000 (+0100) Subject: ARM: dts: imx28-apx4devkit: Convert to use label references X-Git-Tag: v6.6.7~3035^2~20^2~12 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d9355d58217b687f02671169040e2934c8726192;p=platform%2Fkernel%2Flinux-starfive.git ARM: dts: imx28-apx4devkit: Convert to use label references This board file still use node name and unit address to reference parts from the imx28.dtsi . This causes a lot of redundancy. So use label references in orer to make it easier to maintain. Signed-off-by: Stefan Wahren Cc: Aapo Vienamo Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b86be32..f9bf40d 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -11,200 +11,6 @@ reg = <0x40000000 0x04000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; - bus-width = <4>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_RDY1__GPIO_0_21 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_JTAG_RTCK__GPIO_4_20 - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - lcdif_pins_apx4: lcdif-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA4__SSP2_D0 - MX28_PAD_SSP0_DATA5__SSP2_D3 - MX28_PAD_SSP0_DATA6__SSP2_CMD - MX28_PAD_SSP0_DATA7__SSP2_SCK - MX28_PAD_SSP2_SS1__SSP2_D1 - MX28_PAD_SSP2_SS2__SSP2_D2 - >; - fsl,drive-strength = ; - fsl,voltage = ; - fsl,pull-up = ; - }; - - mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__SSP2_SCK - >; - fsl,drive-strength = ; - fsl,pull-up = ; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_apx4>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - vback-porch = <32>; - vfront-porch = <13>; - hsync-len = <48>; - vsync-len = <3>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - pcf8563: rtc@51 { - compatible = "phg,pcf8563"; - reg = <0x51>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_2pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -238,3 +44,189 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_JTAG_RTCK__GPIO_4_20 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_SSP0_DATA7__SSP2_SCK + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = ; + fsl,pull-up = ; + }; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +};