From: Steve Rae Date: Wed, 29 Jun 2016 20:42:01 +0000 (-0700) Subject: mmc: increase MMC SDHCI read status timeout X-Git-Tag: v2016.07-rc3~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d90bb439335386b3ae6ada89b89720cc66ec9352;p=platform%2Fkernel%2Fu-boot.git mmc: increase MMC SDHCI read status timeout Otherwise, ocassionally see errors like this: Flashing sparse image at offset 2078720 Flashing Sparse Image sdhci_send_command: Timeout for status update! mmc fail to send stop cmd write_sparse_image: Write failed, block #2181088 [0] This does not affect the actual writing speed, which is controlled by the default value: CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT It only increases the retries when reading: SDHCI_INT_STATUS to avoid the timeout error. Signed-off-by: Steve Rae Reviewed-by: Stefan Roese Tested-by: Masahiro Yamada Tested-by: Jaehoon Chung --- diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 5c71ab8d05..604f18dcc9 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -127,6 +127,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, #define CONFIG_SDHCI_CMD_MAX_TIMEOUT 3200 #endif #define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT 100 +#define SDHCI_READ_STATUS_TIMEOUT 1000 static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) @@ -243,9 +244,9 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, if (stat & SDHCI_INT_ERROR) break; } while (((stat & mask) != mask) && - (get_timer(start) < CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT)); + (get_timer(start) < SDHCI_READ_STATUS_TIMEOUT)); - if (get_timer(start) >= CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT) { + if (get_timer(start) >= SDHCI_READ_STATUS_TIMEOUT) { if (host->quirks & SDHCI_QUIRK_BROKEN_R1B) return 0; else {