From: Vincent Mailhol Date: Fri, 10 Jun 2022 14:30:07 +0000 (+0900) Subject: net: Kconfig: move the CAN device menu to the "Device Drivers" section X-Git-Tag: v6.6.17~6916^2~282^2~5^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d7786af59860a113d62150c4328674e896da7810;p=platform%2Fkernel%2Flinux-rpi.git net: Kconfig: move the CAN device menu to the "Device Drivers" section The devices are meant to be under the "Device Drivers" category of the menuconfig. The CAN subsystem is currently one of the rare exception with all of its devices under the "Networking support" category. The CAN_DEV menuentry gets moved to fix this discrepancy. The CAN menu is added just before MCTP in order to be consistent with the current order under the "Networking support" menu. A dependency on CAN is added to CAN_DEV so that the CAN devices only show up if the CAN subsystem is enabled. Link: https://lore.kernel.org/all/20220610143009.323579-6-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Acked-by: Max Staudt Tested-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index b2a4f998..5de2438 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -499,6 +499,8 @@ config NET_SB1000 source "drivers/net/phy/Kconfig" +source "drivers/net/can/Kconfig" + source "drivers/net/mctp/Kconfig" source "drivers/net/mdio/Kconfig" diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 5335f3a..806f151 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -3,6 +3,7 @@ menuconfig CAN_DEV tristate "CAN Device Drivers" default y + depends on CAN help Controller Area Network (CAN) is serial communications protocol up to 1Mbit/s for its original release (now known as Classical CAN) and up diff --git a/net/can/Kconfig b/net/can/Kconfig index a9ac5ff..cb56be8 100644 --- a/net/can/Kconfig +++ b/net/can/Kconfig @@ -15,7 +15,8 @@ menuconfig CAN PF_CAN is contained in . If you want CAN support you should say Y here and also to the - specific driver for your controller(s) below. + specific driver for your controller(s) under the Network device + support section. if CAN @@ -69,6 +70,4 @@ config CAN_ISOTP If you want to perform automotive vehicle diagnostic services (UDS), say 'y'. -source "drivers/net/can/Kconfig" - endif