From: Lokesh Vutla Date: Fri, 16 Mar 2018 13:22:21 +0000 (+0530) Subject: configs: omapl138: Enable DM and DT X-Git-Tag: v2018.05-rc1~12 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d6d8c4d4cc4bc59c17eabc5ffa43a4d304daa535;p=platform%2Fkernel%2Fu-boot.git configs: omapl138: Enable DM and DT Enable Driver Model and Device-tree support for omapl138 board in U-Boot. Also enable DM_SERIAL and DM_I2C. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 0a2af11..2c1bdb2 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -10,11 +10,11 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk" CONFIG_BOOTDELAY=3 CONFIG_LOGLEVEL=3 CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y @@ -28,9 +28,13 @@ CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DIAG=y CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_BOOTP_DNS=y +CONFIG_DM=y +CONFIG_DM_I2C=y +CONFIG_DM_I2C_COMPAT=y CONFIG_NAND=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y @@ -39,6 +43,6 @@ CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_DAVINCI_SPI=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 2a390bf..77b89bc 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -20,6 +20,14 @@ #define CONFIG_USE_NAND /* +* Disable DM_* for SPL build and can be re-enabled after adding +* DM support in SPL +*/ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_DM_I2C +#undef CONFIG_DM_I2C_COMPAT +#endif +/* * SoC Configuration */ #define CONFIG_MACH_OMAPL138_LCDK @@ -105,11 +113,14 @@ /* * Serial Driver info */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#if !defined(CONFIG_DM_SERIAL) #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#endif #define CONFIG_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE @@ -126,7 +137,6 @@ /* * I2C Configuration */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_DAVINCI #define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */