From: Linus Walleij Date: Thu, 13 Feb 2020 14:15:24 +0000 (+0100) Subject: ARM: dts: Add devicetree for Integrator/AP with IM-PD1 X-Git-Tag: v5.15~3695^2~52^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d67ef24adf3c3fbaed62c31551d6e36f24fece16;p=platform%2Fkernel%2Flinux-starfive.git ARM: dts: Add devicetree for Integrator/AP with IM-PD1 This adds a device tree for the Integrator/AP with the IM-PD1 logic module mounted, using the new logic module bindings. Signed-off-by: Linus Walleij --- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd992..22c234e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \ hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ + integratorap-im-pd1.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_IXP4XX) += \ intel-ixp42x-linksys-nslu2.dtb \ diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts new file mode 100644 index 0000000..1412a1a --- /dev/null +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for the ARM Integrator/AP platform + * with the IM-PD1 example logical module mounted. + */ + +#include "integratorap.dts" + +/ { + model = "ARM Integrator/AP with IM-PD1"; + compatible = "arm,integrator-ap"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + impd1_ram: vram@c2000000 { + /* 1 MB of designated video RAM on the IM-PD1 */ + compatible = "shared-dma-pool"; + reg = <0xc2000000 0x00100000>; + no-map; + }; + }; +}; + +&lm0 { + syscon@0 { + compatible = "arm,im-pd1-syscon", "syscon"; + reg = <0x00000000 0x1000>; + + vco1: clock@00 { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + + vco2: clock@04 { + compatible = "arm,impd1-vco2"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x04>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO2"; + }; + }; + + /* Also used for the Smart Card Interface SCI */ + impd1_uartclk: clock@1_4 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV4"; + }; + + /* For the SSP the clock is divided by 64 */ + impd1_sspclk: clock@1_64 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <64>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV64"; + }; + + /* Fixed regulator for the MMC */ + impd1_3v3: regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* Push buttons on the IM-PD1 */ + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + debounce-interval = <50>; + linux,code = ; + label = "UP"; + gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>; + }; + button@1 { + debounce-interval = <50>; + linux,code = ; + label = "DOWN"; + gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>; + }; + button@2 { + debounce-interval = <50>; + linux,code = ; + label = "LEFT"; + gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + button@3 { + debounce-interval = <50>; + linux,code = ; + label = "UP"; + gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + button@4 { + debounce-interval = <50>; + linux,code = ; + label = "ESC"; + gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>; + }; + button@5 { + debounce-interval = <50>; + linux,code = ; + label = "ENTER"; + gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>; + }; + }; + + + bridge { + compatible = "ti,ths8134b", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + + uart@100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00100000 0x1000>; + interrupts-extended = <&impd1_vic 1>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart@200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00200000 0x1000>; + interrupts-extended = <&impd1_vic 2>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp@300000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x00300000 0x1000>; + interrupts-extended = <&impd1_vic 3>; + clocks = <&impd1_sspclk>, <&sysclk>; + clock-names = "spiclk", "apb_pclk"; + }; + + impd1_gpio0: gpio@400000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00400000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 4>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + impd1_gpio1: gpio@500000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00500000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 5>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + rtc@600000 { + compatible = "arm,pl030", "arm,primecell"; + reg = <0x00600000 0x1000>; + interrupts-extended = <&impd1_vic 6>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + mmc@700000 { + compatible = "arm,pl181", "arm,primecell"; + reg = <0x00700000 0x1000>; + interrupts-extended = <&impd1_vic 7>, + <&impd1_vic 8>; + clocks = <&sysclk>, <&sysclk>; + clock-names = "mclk", "apb_pclk"; + bus-width = <1>; + max-frequency = <515633>; + vmmc-supply = <&impd1_3v3>; + wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>; + cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>; + }; + + aaci@800000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x00800000 0x1000>; + interrupts-extended = <&impd1_vic 9>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + display@1000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x01000000 0x1000>; + interrupts-extended = <&impd1_vic 11>; + clocks = <&vco1>, <&sysclk>; + clock-names = "clcdclk", "apb_pclk"; + /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ + max-memory-bandwidth = <40000000>; + memory-region = <&impd1_ram>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + clcd_pads_vga_dac: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + }; + + impd1_vic: interrupt-controller@3000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x03000000 0x1000>; + /* Valid interrupts, 0-9 and 11 */ + valid-mask = <0x00000bff>; + /* LM site 0 has IRQ 9 on the PIC */ + interrupts-extended = <&pic 9>; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 198d661..67d1f9b 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -4,7 +4,9 @@ */ /dts-v1/; -/include/ "integrator.dtsi" +#include "integrator.dtsi" +#include +#include / { model = "ARM Integrator/AP"; @@ -107,9 +109,6 @@ syscon { compatible = "arm,integrator-ap-syscon", "syscon"; reg = <0x11000000 0x100>; - interrupt-parent = <&pic>; - /* These are the logical module IRQs */ - interrupts = <9>, <10>, <11>, <12>; /* * SYSCLK clocks PCIv3 bridge, system controller and the @@ -239,4 +238,50 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; }; + + /* + * Logic module bus, we support up to 4 logical modules + * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000 + * and use interrupts 9, 10, 11 and 12 respectively. + */ + bus@c0000000 { + compatible = "arm,integrator-ap-lm"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc0000000 0xc0000000 0x40000000>; + dma-ranges; + + lm0: bus@c0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xc0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xc0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm1: bus@d0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xd0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xd0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm2: bus@e0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xe0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xe0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm3: bus@f0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xf0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; };