From: James Hogan Date: Thu, 20 Jun 2013 09:26:27 +0000 (+0100) Subject: pinctrl-tz1090: add TZ1090 pinctrl driver X-Git-Tag: upstream/snapshot3+hdmi~4800^2~7 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d5025f9f535108ba44c7f00573a2a34c18a3ea2b;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git pinctrl-tz1090: add TZ1090 pinctrl driver Add a pin control driver for the main pins on the TZ1090 SoC. This doesn't include the low-power pins as they're controlled separately via the Powerdown Controller (PDC) registers. Signed-off-by: James Hogan Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley Cc: Linus Walleij Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt new file mode 100644 index 0000000..39bfd9c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -0,0 +1,232 @@ +ImgTec TZ1090 pin controller + +Required properties: +- compatible: "img,tz1090-pinctrl" +- reg: Should contain the register physical address and length of the pad + configuration registers (CR_PADS_* and CR_IF_CTL0). + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +TZ1090's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. For this reason, even seemingly boolean +values are actually tristates in this binding: unspecified, off, or on. +Unspecified is represented as an absent property, and off/on are represented as +integer values 0 and 1. + +Required subnode-properties: +- tz1090,pins : An array of strings. Each string contains the name of a pin or + group. Valid values for these names are listed below. + +Optional subnode-properties: +- tz1090,function: A string containing the name of the function to mux to the + pin or group. Valid values for function names are listed below, including + which pingroups can be muxed to them. +- supported generic pinconfig properties (for further details see + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt): + - bias-disable + - bias-high-impedance + - bias-bus-hold + - bias-pull-up + - bias-pull-down + - input-schmitt-enable + - input-schmitt-disable + - slew-rate: Integer, control slew rate of pins. + 0: slow (half frequency) + 1: fast + - drive-strength: Integer, control drive strength of pins in mA. + 2: 2mA + 4: 4mA + 8: 8mA + 12: 12mA + + +Note that many of these properties are only valid for certain specific pins +or groups. See the TZ1090 TRM for complete details regarding which groups +support which functionality. The Linux pinctrl driver may also be a useful +reference. + +Valid values for pin and group names are: + + gpio pins: + + These all support bias-high-impediance, bias-pull-up, bias-pull-down, and + bias-bus-hold (which can also be provided to any of the groups below to set + it for all pins in that group). + + They also all support the some form of muxing. Any pins which are contained + in one of the mux groups (see below) can be muxed only to the functions + supported by the mux group. All other pins can be muxed to the "perip" + function which which enables them with their intended peripheral. + + Different pins in the same mux group cannot be muxed to different functions, + however it is possible to mux only a subset of the pins in a mux group to a + particular function and leave the remaining pins unmuxed. This is useful if + the board connects certain pins in a group to other devices to be controlled + by GPIO, and you don't want the usual peripheral to have any control of the + pin. + + ant_sel0, ant_sel1, gain0, gain1, gain2, gain3, gain4, gain5, gain6, gain7, + i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, i2s_lrclk_out, + i2s_mclk, pa_on, pdm_a, pdm_b, pdm_c, pdm_d, pll_on, rx_hp, rx_on, + scb0_sclk, scb0_sdat, scb1_sclk, scb1_sdat, scb2_sclk, scb2_sdat, sdh_cd, + sdh_clk_in, sdh_wp, sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3, + spi0_cs0, spi0_cs1, spi0_cs2, spi0_din, spi0_dout, spi0_mclk, spi1_cs0, + spi1_cs1, spi1_cs2, spi1_din, spi1_dout, spi1_mclk, tft_blank_ls, tft_blue0, + tft_blue1, tft_blue2, tft_blue3, tft_blue4, tft_blue5, tft_blue6, tft_blue7, + tft_green0, tft_green1, tft_green2, tft_green3, tft_green4, tft_green5, + tft_green6, tft_green7, tft_hsync_nr, tft_panelclk, tft_pwrsave, tft_red0, + tft_red1, tft_red2, tft_red3, tft_red4, tft_red5, tft_red6, tft_red7, + tft_vd12acb, tft_vdden_gd, tft_vsync_ns, tx_on, uart0_cts, uart0_rts, + uart0_rxd, uart0_txd, uart1_rxd, uart1_txd. + + bias-high-impediance: supported. + bias-pull-up: supported. + bias-pull-down: supported. + bias-bus-hold: supported. + function: perip or those supported by pin's mux group. + + other pins: + + These other pins are part of various pin groups below, but can't be + controlled as GPIOs. They do however support bias-high-impediance, + bias-pull-up, bias-pull-down, and bias-bus-hold (which can also be provided + to any of the groups below to set it for all pins in that group). + + clk_out0, clk_out1, tck, tdi, tdo, tms, trst. + + bias-high-impediance: supported. + bias-pull-up: supported. + bias-pull-down: supported. + bias-bus-hold: supported. + + mux groups: + + These all support function, and some support drive configs. + + afe + pins: tx_on, rx_on, pll_on, pa_on, rx_hp, ant_sel0, + ant_sel1, gain0, gain1, gain2, gain3, gain4, + gain5, gain6, gain7. + function: afe, ts_out_0. + input-schmitt-enable: supported. + input-schmitt-disable: supported. + slew-rate: supported. + drive-strength: supported. + pdm_d + pins: pdm_d. + function: pdm_dac, usb_vbus. + sdh + pins: sdh_cd, sdh_wp, sdh_clk_in. + function: sdh, sdio. + sdio + pins: sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, + sdio_d3. + function: sdio, sdh. + spi1_cs2 + pins: spi1_cs2. + function: spi1_cs2, usb_vbus. + tft + pins: tft_red0, tft_red1, tft_red2, tft_red3, + tft_red4, tft_red5, tft_red6, tft_red7, + tft_green0, tft_green1, tft_green2, tft_green3, + tft_green4, tft_green5, tft_green6, tft_green7, + tft_blue0, tft_blue1, tft_blue2, tft_blue3, + tft_blue4, tft_blue5, tft_blue6, tft_blue7, + tft_vdden_gd, tft_panelclk, tft_blank_ls, + tft_vsync_ns, tft_hsync_nr, tft_vd12acb, + tft_pwrsave. + function: tft, ext_dac, not_iqadc_stb, iqdac_stb, ts_out_1, + lcd_trace, phy_ringosc. + input-schmitt-enable: supported. + input-schmitt-disable: supported. + slew-rate: supported. + drive-strength: supported. + + drive groups: + + These all support input-schmitt-enable, input-schmitt-disable, slew-rate, + and drive-strength. + + jtag + pins: tck, trst, tdi, tdo, tms. + scb1 + pins: scb1_sdat, scb1_sclk. + scb2 + pins: scb2_sdat, scb2_sclk. + spi0 + pins: spi0_mclk, spi0_cs0, spi0_cs1, spi0_cs2, spi0_dout, spi0_din. + spi1 + pins: spi1_mclk, spi1_cs0, spi1_cs1, spi1_cs2, spi1_dout, spi1_din. + uart + pins: uart0_txd, uart0_rxd, uart0_rts, uart0_cts, + uart1_txd, uart1_rxd. + drive_i2s + pins: clk_out1, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, + i2s_lrclk_out, i2s_bclk_out, i2s_mclk. + drive_pdm + pins: clk_out0, pdm_b, pdm_a. + drive_scb0 + pins: scb0_sclk, scb0_sdat, pdm_d, pdm_c. + drive_sdio + pins: sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3, + sdh_wp, sdh_cd, sdh_clk_in. + + convenience groups: + + These are just convenient groupings of pins and don't support any drive + configs. + + uart0 + pins: uart0_cts, uart0_rts, uart0_rxd, uart0_txd. + uart1 + pins: uart1_rxd, uart1_txd. + scb0 + pins: scb0_sclk, scb0_sdat. + i2s + pins: i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, + i2s_lrclk_out, i2s_mclk. + +Example: + + pinctrl: pinctrl@02005800 { + #gpio-range-cells = <3>; + compatible = "img,tz1090-pinctrl"; + reg = <0x02005800 0xe4>; + }; + +Example board file extract: + + &pinctrl { + uart0_default: uart0 { + uart0_cfg { + tz1090,pins = "uart0_rxd", + "uart0_txd"; + tz1090,function = "perip"; + }; + }; + tft_default: tft { + tft_cfg { + tz1090,pins = "tft"; + tz1090,function = "tft"; + }; + }; + }; + + uart@02004b00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_default>; + }; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index e01976f..acdaa08 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -212,6 +212,12 @@ config PINCTRL_TEGRA114 bool select PINCTRL_TEGRA +config PINCTRL_TZ1090 + bool "Toumaz Xenif TZ1090 pin control driver" + depends on SOC_TZ1090 + select PINMUX + select GENERIC_PINCONF + config PINCTRL_U300 bool "U300 pin controller driver" depends on ARCH_U300 diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 9031afd..37ff29e 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o +obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c new file mode 100644 index 0000000..02ff3a2 --- /dev/null +++ b/drivers/pinctrl/pinctrl-tz1090.c @@ -0,0 +1,2077 @@ +/* + * Pinctrl driver for the Toumaz Xenif TZ1090 SoC + * + * Copyright (c) 2013, Imagination Technologies Ltd. + * + * Derived from Tegra code: + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * + * Derived from code: + * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2010 NVIDIA Corporation + * Copyright (C) 2009-2011 ST-Ericsson AB + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The registers may be shared with other threads/cores, so we need to use the + * metag global lock2 for atomicity. + */ +#include + +#include "core.h" +#include "pinconf.h" + +/* Register offsets from bank base address */ +#define REG_PINCTRL_SELECT 0x10 +#define REG_PINCTRL_SCHMITT 0x90 +#define REG_PINCTRL_PU_PD 0xa0 +#define REG_PINCTRL_SR 0xc0 +#define REG_PINCTRL_DR 0xd0 +#define REG_PINCTRL_IF_CTL 0xe0 + +/* REG_PINCTRL_PU_PD field values */ +#define REG_PU_PD_TRISTATE 0 +#define REG_PU_PD_UP 1 +#define REG_PU_PD_DOWN 2 +#define REG_PU_PD_REPEATER 3 + +/* REG_PINCTRL_DR field values */ +#define REG_DR_2mA 0 +#define REG_DR_4mA 1 +#define REG_DR_8mA 2 +#define REG_DR_12mA 3 + +/** + * struct tz1090_function - TZ1090 pinctrl mux function + * @name: The name of the function, exported to pinctrl core. + * @groups: An array of pin groups that may select this function. + * @ngroups: The number of entries in @groups. + */ +struct tz1090_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +/** + * struct tz1090_muxdesc - TZ1090 individual mux description + * @funcs: Function for each mux value. + * @reg: Mux register offset. 0 if unsupported. + * @bit: Mux register bit. 0 if unsupported. + * @width: Mux field width. 0 if unsupported. + * + * A representation of a group of signals (possibly just one signal) in the + * TZ1090 which can be muxed to a set of functions or sub muxes. + */ +struct tz1090_muxdesc { + int funcs[5]; + u16 reg; + u8 bit; + u8 width; +}; + +/** + * struct tz1090_pingroup - TZ1090 pin group + * @name: Name of pin group. + * @pins: Array of pin numbers in this pin group. + * @npins: Number of pins in this pin group. + * @mux: Top level mux. + * @drv: Drive control supported, 0 if unsupported. + * This means Schmitt, Slew, and Drive strength. + * @slw_bit: Slew register bit. 0 if unsupported. + * The same bit is used for Schmitt, and Drive (*2). + * @func: Currently muxed function. + * @func_count: Number of pins using current mux function. + * + * A representation of a group of pins (possibly just one pin) in the TZ1090 + * pin controller. Each group allows some parameter or parameters to be + * configured. The most common is mux function selection. + */ +struct tz1090_pingroup { + const char *name; + const unsigned int *pins; + unsigned int npins; + struct tz1090_muxdesc mux; + + bool drv; + u8 slw_bit; + + int func; + unsigned int func_count; +}; + +/* + * Most pins affected by the pinmux can also be GPIOs. Define these first. + * These must match how the GPIO driver names/numbers its pins. + */ + +enum tz1090_pin { + /* GPIO pins */ + TZ1090_PIN_SDIO_CLK, + TZ1090_PIN_SDIO_CMD, + TZ1090_PIN_SDIO_D0, + TZ1090_PIN_SDIO_D1, + TZ1090_PIN_SDIO_D2, + TZ1090_PIN_SDIO_D3, + TZ1090_PIN_SDH_CD, + TZ1090_PIN_SDH_WP, + TZ1090_PIN_SPI0_MCLK, + TZ1090_PIN_SPI0_CS0, + TZ1090_PIN_SPI0_CS1, + TZ1090_PIN_SPI0_CS2, + TZ1090_PIN_SPI0_DOUT, + TZ1090_PIN_SPI0_DIN, + TZ1090_PIN_SPI1_MCLK, + TZ1090_PIN_SPI1_CS0, + TZ1090_PIN_SPI1_CS1, + TZ1090_PIN_SPI1_CS2, + TZ1090_PIN_SPI1_DOUT, + TZ1090_PIN_SPI1_DIN, + TZ1090_PIN_UART0_RXD, + TZ1090_PIN_UART0_TXD, + TZ1090_PIN_UART0_CTS, + TZ1090_PIN_UART0_RTS, + TZ1090_PIN_UART1_RXD, + TZ1090_PIN_UART1_TXD, + TZ1090_PIN_SCB0_SDAT, + TZ1090_PIN_SCB0_SCLK, + TZ1090_PIN_SCB1_SDAT, + TZ1090_PIN_SCB1_SCLK, + TZ1090_PIN_SCB2_SDAT, + TZ1090_PIN_SCB2_SCLK, + TZ1090_PIN_I2S_MCLK, + TZ1090_PIN_I2S_BCLK_OUT, + TZ1090_PIN_I2S_LRCLK_OUT, + TZ1090_PIN_I2S_DOUT0, + TZ1090_PIN_I2S_DOUT1, + TZ1090_PIN_I2S_DOUT2, + TZ1090_PIN_I2S_DIN, + TZ1090_PIN_PDM_A, + TZ1090_PIN_PDM_B, + TZ1090_PIN_PDM_C, + TZ1090_PIN_PDM_D, + TZ1090_PIN_TFT_RED0, + TZ1090_PIN_TFT_RED1, + TZ1090_PIN_TFT_RED2, + TZ1090_PIN_TFT_RED3, + TZ1090_PIN_TFT_RED4, + TZ1090_PIN_TFT_RED5, + TZ1090_PIN_TFT_RED6, + TZ1090_PIN_TFT_RED7, + TZ1090_PIN_TFT_GREEN0, + TZ1090_PIN_TFT_GREEN1, + TZ1090_PIN_TFT_GREEN2, + TZ1090_PIN_TFT_GREEN3, + TZ1090_PIN_TFT_GREEN4, + TZ1090_PIN_TFT_GREEN5, + TZ1090_PIN_TFT_GREEN6, + TZ1090_PIN_TFT_GREEN7, + TZ1090_PIN_TFT_BLUE0, + TZ1090_PIN_TFT_BLUE1, + TZ1090_PIN_TFT_BLUE2, + TZ1090_PIN_TFT_BLUE3, + TZ1090_PIN_TFT_BLUE4, + TZ1090_PIN_TFT_BLUE5, + TZ1090_PIN_TFT_BLUE6, + TZ1090_PIN_TFT_BLUE7, + TZ1090_PIN_TFT_VDDEN_GD, + TZ1090_PIN_TFT_PANELCLK, + TZ1090_PIN_TFT_BLANK_LS, + TZ1090_PIN_TFT_VSYNC_NS, + TZ1090_PIN_TFT_HSYNC_NR, + TZ1090_PIN_TFT_VD12ACB, + TZ1090_PIN_TFT_PWRSAVE, + TZ1090_PIN_TX_ON, + TZ1090_PIN_RX_ON, + TZ1090_PIN_PLL_ON, + TZ1090_PIN_PA_ON, + TZ1090_PIN_RX_HP, + TZ1090_PIN_GAIN0, + TZ1090_PIN_GAIN1, + TZ1090_PIN_GAIN2, + TZ1090_PIN_GAIN3, + TZ1090_PIN_GAIN4, + TZ1090_PIN_GAIN5, + TZ1090_PIN_GAIN6, + TZ1090_PIN_GAIN7, + TZ1090_PIN_ANT_SEL0, + TZ1090_PIN_ANT_SEL1, + TZ1090_PIN_SDH_CLK_IN, + + /* Non-GPIO pins */ + TZ1090_PIN_TCK, + TZ1090_PIN_TRST, + TZ1090_PIN_TDI, + TZ1090_PIN_TDO, + TZ1090_PIN_TMS, + TZ1090_PIN_CLK_OUT0, + TZ1090_PIN_CLK_OUT1, + + NUM_GPIOS = TZ1090_PIN_TCK, +}; + +/* Pin names */ + +static const struct pinctrl_pin_desc tz1090_pins[] = { + /* GPIO pins */ + PINCTRL_PIN(TZ1090_PIN_SDIO_CLK, "sdio_clk"), + PINCTRL_PIN(TZ1090_PIN_SDIO_CMD, "sdio_cmd"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D0, "sdio_d0"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D1, "sdio_d1"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D2, "sdio_d2"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D3, "sdio_d3"), + PINCTRL_PIN(TZ1090_PIN_SDH_CD, "sdh_cd"), + PINCTRL_PIN(TZ1090_PIN_SDH_WP, "sdh_wp"), + PINCTRL_PIN(TZ1090_PIN_SPI0_MCLK, "spi0_mclk"), + PINCTRL_PIN(TZ1090_PIN_SPI0_CS0, "spi0_cs0"), + PINCTRL_PIN(TZ1090_PIN_SPI0_CS1, "spi0_cs1"), + PINCTRL_PIN(TZ1090_PIN_SPI0_CS2, "spi0_cs2"), + PINCTRL_PIN(TZ1090_PIN_SPI0_DOUT, "spi0_dout"), + PINCTRL_PIN(TZ1090_PIN_SPI0_DIN, "spi0_din"), + PINCTRL_PIN(TZ1090_PIN_SPI1_MCLK, "spi1_mclk"), + PINCTRL_PIN(TZ1090_PIN_SPI1_CS0, "spi1_cs0"), + PINCTRL_PIN(TZ1090_PIN_SPI1_CS1, "spi1_cs1"), + PINCTRL_PIN(TZ1090_PIN_SPI1_CS2, "spi1_cs2"), + PINCTRL_PIN(TZ1090_PIN_SPI1_DOUT, "spi1_dout"), + PINCTRL_PIN(TZ1090_PIN_SPI1_DIN, "spi1_din"), + PINCTRL_PIN(TZ1090_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(TZ1090_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(TZ1090_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(TZ1090_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(TZ1090_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(TZ1090_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(TZ1090_PIN_SCB0_SDAT, "scb0_sdat"), + PINCTRL_PIN(TZ1090_PIN_SCB0_SCLK, "scb0_sclk"), + PINCTRL_PIN(TZ1090_PIN_SCB1_SDAT, "scb1_sdat"), + PINCTRL_PIN(TZ1090_PIN_SCB1_SCLK, "scb1_sclk"), + PINCTRL_PIN(TZ1090_PIN_SCB2_SDAT, "scb2_sdat"), + PINCTRL_PIN(TZ1090_PIN_SCB2_SCLK, "scb2_sclk"), + PINCTRL_PIN(TZ1090_PIN_I2S_MCLK, "i2s_mclk"), + PINCTRL_PIN(TZ1090_PIN_I2S_BCLK_OUT, "i2s_bclk_out"), + PINCTRL_PIN(TZ1090_PIN_I2S_LRCLK_OUT, "i2s_lrclk_out"), + PINCTRL_PIN(TZ1090_PIN_I2S_DOUT0, "i2s_dout0"), + PINCTRL_PIN(TZ1090_PIN_I2S_DOUT1, "i2s_dout1"), + PINCTRL_PIN(TZ1090_PIN_I2S_DOUT2, "i2s_dout2"), + PINCTRL_PIN(TZ1090_PIN_I2S_DIN, "i2s_din"), + PINCTRL_PIN(TZ1090_PIN_PDM_A, "pdm_a"), + PINCTRL_PIN(TZ1090_PIN_PDM_B, "pdm_b"), + PINCTRL_PIN(TZ1090_PIN_PDM_C, "pdm_c"), + PINCTRL_PIN(TZ1090_PIN_PDM_D, "pdm_d"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED0, "tft_red0"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED1, "tft_red1"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED2, "tft_red2"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED3, "tft_red3"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED4, "tft_red4"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED5, "tft_red5"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED6, "tft_red6"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED7, "tft_red7"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN0, "tft_green0"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN1, "tft_green1"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN2, "tft_green2"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN3, "tft_green3"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN4, "tft_green4"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN5, "tft_green5"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN6, "tft_green6"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN7, "tft_green7"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE0, "tft_blue0"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE1, "tft_blue1"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE2, "tft_blue2"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE3, "tft_blue3"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE4, "tft_blue4"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE5, "tft_blue5"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE6, "tft_blue6"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE7, "tft_blue7"), + PINCTRL_PIN(TZ1090_PIN_TFT_VDDEN_GD, "tft_vdden_gd"), + PINCTRL_PIN(TZ1090_PIN_TFT_PANELCLK, "tft_panelclk"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLANK_LS, "tft_blank_ls"), + PINCTRL_PIN(TZ1090_PIN_TFT_VSYNC_NS, "tft_vsync_ns"), + PINCTRL_PIN(TZ1090_PIN_TFT_HSYNC_NR, "tft_hsync_nr"), + PINCTRL_PIN(TZ1090_PIN_TFT_VD12ACB, "tft_vd12acb"), + PINCTRL_PIN(TZ1090_PIN_TFT_PWRSAVE, "tft_pwrsave"), + PINCTRL_PIN(TZ1090_PIN_TX_ON, "tx_on"), + PINCTRL_PIN(TZ1090_PIN_RX_ON, "rx_on"), + PINCTRL_PIN(TZ1090_PIN_PLL_ON, "pll_on"), + PINCTRL_PIN(TZ1090_PIN_PA_ON, "pa_on"), + PINCTRL_PIN(TZ1090_PIN_RX_HP, "rx_hp"), + PINCTRL_PIN(TZ1090_PIN_GAIN0, "gain0"), + PINCTRL_PIN(TZ1090_PIN_GAIN1, "gain1"), + PINCTRL_PIN(TZ1090_PIN_GAIN2, "gain2"), + PINCTRL_PIN(TZ1090_PIN_GAIN3, "gain3"), + PINCTRL_PIN(TZ1090_PIN_GAIN4, "gain4"), + PINCTRL_PIN(TZ1090_PIN_GAIN5, "gain5"), + PINCTRL_PIN(TZ1090_PIN_GAIN6, "gain6"), + PINCTRL_PIN(TZ1090_PIN_GAIN7, "gain7"), + PINCTRL_PIN(TZ1090_PIN_ANT_SEL0, "ant_sel0"), + PINCTRL_PIN(TZ1090_PIN_ANT_SEL1, "ant_sel1"), + PINCTRL_PIN(TZ1090_PIN_SDH_CLK_IN, "sdh_clk_in"), + + /* Non-GPIO pins */ + PINCTRL_PIN(TZ1090_PIN_TCK, "tck"), + PINCTRL_PIN(TZ1090_PIN_TRST, "trst"), + PINCTRL_PIN(TZ1090_PIN_TDI, "tdi"), + PINCTRL_PIN(TZ1090_PIN_TDO, "tdo"), + PINCTRL_PIN(TZ1090_PIN_TMS, "tms"), + PINCTRL_PIN(TZ1090_PIN_CLK_OUT0, "clk_out0"), + PINCTRL_PIN(TZ1090_PIN_CLK_OUT1, "clk_out1"), +}; + +/* Pins in each pin group */ + +static const unsigned int spi1_cs2_pins[] = { + TZ1090_PIN_SPI1_CS2, +}; + +static const unsigned int pdm_d_pins[] = { + TZ1090_PIN_PDM_D, +}; + +static const unsigned int tft_pins[] = { + TZ1090_PIN_TFT_RED0, + TZ1090_PIN_TFT_RED1, + TZ1090_PIN_TFT_RED2, + TZ1090_PIN_TFT_RED3, + TZ1090_PIN_TFT_RED4, + TZ1090_PIN_TFT_RED5, + TZ1090_PIN_TFT_RED6, + TZ1090_PIN_TFT_RED7, + TZ1090_PIN_TFT_GREEN0, + TZ1090_PIN_TFT_GREEN1, + TZ1090_PIN_TFT_GREEN2, + TZ1090_PIN_TFT_GREEN3, + TZ1090_PIN_TFT_GREEN4, + TZ1090_PIN_TFT_GREEN5, + TZ1090_PIN_TFT_GREEN6, + TZ1090_PIN_TFT_GREEN7, + TZ1090_PIN_TFT_BLUE0, + TZ1090_PIN_TFT_BLUE1, + TZ1090_PIN_TFT_BLUE2, + TZ1090_PIN_TFT_BLUE3, + TZ1090_PIN_TFT_BLUE4, + TZ1090_PIN_TFT_BLUE5, + TZ1090_PIN_TFT_BLUE6, + TZ1090_PIN_TFT_BLUE7, + TZ1090_PIN_TFT_VDDEN_GD, + TZ1090_PIN_TFT_PANELCLK, + TZ1090_PIN_TFT_BLANK_LS, + TZ1090_PIN_TFT_VSYNC_NS, + TZ1090_PIN_TFT_HSYNC_NR, + TZ1090_PIN_TFT_VD12ACB, + TZ1090_PIN_TFT_PWRSAVE, +}; + +static const unsigned int afe_pins[] = { + TZ1090_PIN_TX_ON, + TZ1090_PIN_RX_ON, + TZ1090_PIN_PLL_ON, + TZ1090_PIN_PA_ON, + TZ1090_PIN_RX_HP, + TZ1090_PIN_ANT_SEL0, + TZ1090_PIN_ANT_SEL1, + TZ1090_PIN_GAIN0, + TZ1090_PIN_GAIN1, + TZ1090_PIN_GAIN2, + TZ1090_PIN_GAIN3, + TZ1090_PIN_GAIN4, + TZ1090_PIN_GAIN5, + TZ1090_PIN_GAIN6, + TZ1090_PIN_GAIN7, +}; + +static const unsigned int sdio_pins[] = { + TZ1090_PIN_SDIO_CLK, + TZ1090_PIN_SDIO_CMD, + TZ1090_PIN_SDIO_D0, + TZ1090_PIN_SDIO_D1, + TZ1090_PIN_SDIO_D2, + TZ1090_PIN_SDIO_D3, +}; + +static const unsigned int sdh_pins[] = { + TZ1090_PIN_SDH_CD, + TZ1090_PIN_SDH_WP, + TZ1090_PIN_SDH_CLK_IN, +}; + +static const unsigned int spi0_pins[] = { + TZ1090_PIN_SPI0_MCLK, + TZ1090_PIN_SPI0_CS0, + TZ1090_PIN_SPI0_CS1, + TZ1090_PIN_SPI0_CS2, + TZ1090_PIN_SPI0_DOUT, + TZ1090_PIN_SPI0_DIN, +}; + +static const unsigned int spi1_pins[] = { + TZ1090_PIN_SPI1_MCLK, + TZ1090_PIN_SPI1_CS0, + TZ1090_PIN_SPI1_CS1, + TZ1090_PIN_SPI1_CS2, + TZ1090_PIN_SPI1_DOUT, + TZ1090_PIN_SPI1_DIN, +}; + +static const unsigned int uart0_pins[] = { + TZ1090_PIN_UART0_RTS, + TZ1090_PIN_UART0_CTS, + TZ1090_PIN_UART0_TXD, + TZ1090_PIN_UART0_RXD, +}; + +static const unsigned int uart1_pins[] = { + TZ1090_PIN_UART1_TXD, + TZ1090_PIN_UART1_RXD, +}; + +static const unsigned int uart_pins[] = { + TZ1090_PIN_UART1_TXD, + TZ1090_PIN_UART1_RXD, + TZ1090_PIN_UART0_RTS, + TZ1090_PIN_UART0_CTS, + TZ1090_PIN_UART0_TXD, + TZ1090_PIN_UART0_RXD, +}; + +static const unsigned int scb0_pins[] = { + TZ1090_PIN_SCB0_SDAT, + TZ1090_PIN_SCB0_SCLK, +}; + +static const unsigned int scb1_pins[] = { + TZ1090_PIN_SCB1_SDAT, + TZ1090_PIN_SCB1_SCLK, +}; + +static const unsigned int scb2_pins[] = { + TZ1090_PIN_SCB2_SDAT, + TZ1090_PIN_SCB2_SCLK, +}; + +static const unsigned int i2s_pins[] = { + TZ1090_PIN_I2S_MCLK, + TZ1090_PIN_I2S_BCLK_OUT, + TZ1090_PIN_I2S_LRCLK_OUT, + TZ1090_PIN_I2S_DOUT0, + TZ1090_PIN_I2S_DOUT1, + TZ1090_PIN_I2S_DOUT2, + TZ1090_PIN_I2S_DIN, +}; + +static const unsigned int jtag_pins[] = { + TZ1090_PIN_TCK, + TZ1090_PIN_TRST, + TZ1090_PIN_TDI, + TZ1090_PIN_TDO, + TZ1090_PIN_TMS, +}; + +/* Pins in each drive pin group */ + +static const unsigned int drive_sdio_pins[] = { + TZ1090_PIN_SDIO_CLK, + TZ1090_PIN_SDIO_CMD, + TZ1090_PIN_SDIO_D0, + TZ1090_PIN_SDIO_D1, + TZ1090_PIN_SDIO_D2, + TZ1090_PIN_SDIO_D3, + TZ1090_PIN_SDH_WP, + TZ1090_PIN_SDH_CD, + TZ1090_PIN_SDH_CLK_IN, +}; + +static const unsigned int drive_i2s_pins[] = { + TZ1090_PIN_CLK_OUT1, + TZ1090_PIN_I2S_DIN, + TZ1090_PIN_I2S_DOUT0, + TZ1090_PIN_I2S_DOUT1, + TZ1090_PIN_I2S_DOUT2, + TZ1090_PIN_I2S_LRCLK_OUT, + TZ1090_PIN_I2S_BCLK_OUT, + TZ1090_PIN_I2S_MCLK, +}; + +static const unsigned int drive_scb0_pins[] = { + TZ1090_PIN_SCB0_SCLK, + TZ1090_PIN_SCB0_SDAT, + TZ1090_PIN_PDM_D, + TZ1090_PIN_PDM_C, +}; + +static const unsigned int drive_pdm_pins[] = { + TZ1090_PIN_CLK_OUT0, + TZ1090_PIN_PDM_B, + TZ1090_PIN_PDM_A, +}; + +/* Pin groups each function can be muxed to */ + +/* + * The magic "perip" function allows otherwise non-muxing pins to be enabled in + * peripheral mode. + */ +static const char * const perip_groups[] = { + /* non-muxing convenient gpio pingroups */ + "uart", + "uart0", + "uart1", + "spi0", + "spi1", + "scb0", + "scb1", + "scb2", + "i2s", + /* individual pins not part of a pin mux group */ + "spi0_mclk", + "spi0_cs0", + "spi0_cs1", + "spi0_cs2", + "spi0_dout", + "spi0_din", + "spi1_mclk", + "spi1_cs0", + "spi1_cs1", + "spi1_dout", + "spi1_din", + "uart0_rxd", + "uart0_txd", + "uart0_cts", + "uart0_rts", + "uart1_rxd", + "uart1_txd", + "scb0_sdat", + "scb0_sclk", + "scb1_sdat", + "scb1_sclk", + "scb2_sdat", + "scb2_sclk", + "i2s_mclk", + "i2s_bclk_out", + "i2s_lrclk_out", + "i2s_dout0", + "i2s_dout1", + "i2s_dout2", + "i2s_din", + "pdm_a", + "pdm_b", + "pdm_c", +}; + +static const char * const sdh_sdio_groups[] = { + "sdh", + "sdio", + /* sdh pins */ + "sdh_cd", + "sdh_wp", + "sdh_clk_in", + /* sdio pins */ + "sdio_clk", + "sdio_cmd", + "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", +}; + +static const char * const spi1_cs2_groups[] = { + "spi1_cs2", +}; + +static const char * const pdm_dac_groups[] = { + "pdm_d", +}; + +static const char * const usb_vbus_groups[] = { + "spi1_cs2", + "pdm_d", +}; + +static const char * const afe_groups[] = { + "afe", + /* afe pins */ + "tx_on", + "rx_on", + "pll_on", + "pa_on", + "rx_hp", + "ant_sel0", + "ant_sel1", + "gain0", + "gain1", + "gain2", + "gain3", + "gain4", + "gain5", + "gain6", + "gain7", +}; + +static const char * const tft_groups[] = { + "tft", + /* tft pins */ + "tft_red0", + "tft_red1", + "tft_red2", + "tft_red3", + "tft_red4", + "tft_red5", + "tft_red6", + "tft_red7", + "tft_green0", + "tft_green1", + "tft_green2", + "tft_green3", + "tft_green4", + "tft_green5", + "tft_green6", + "tft_green7", + "tft_blue0", + "tft_blue1", + "tft_blue2", + "tft_blue3", + "tft_blue4", + "tft_blue5", + "tft_blue6", + "tft_blue7", + "tft_vdden_gd", + "tft_panelclk", + "tft_blank_ls", + "tft_vsync_ns", + "tft_hsync_nr", + "tft_vd12acb", + "tft_pwrsave", +}; + +/* Mux functions that can be used by a mux */ + +enum tz1090_mux { + /* internal placeholder */ + TZ1090_MUX_NA = -1, + /* magic per-non-muxing-GPIO-pin peripheral mode mux */ + TZ1090_MUX_PERIP, + /* SDH/SDIO mux */ + TZ1090_MUX_SDH, + TZ1090_MUX_SDIO, + /* USB_VBUS muxes */ + TZ1090_MUX_SPI1_CS2, + TZ1090_MUX_PDM_DAC, + TZ1090_MUX_USB_VBUS, + /* AFE mux */ + TZ1090_MUX_AFE, + TZ1090_MUX_TS_OUT_0, + /* EXT_DAC mux */ + TZ1090_MUX_DAC, + TZ1090_MUX_NOT_IQADC_STB, + TZ1090_MUX_IQDAC_STB, + /* TFT mux */ + TZ1090_MUX_TFT, + TZ1090_MUX_EXT_DAC, + TZ1090_MUX_TS_OUT_1, + TZ1090_MUX_LCD_TRACE, + TZ1090_MUX_PHY_RINGOSC, +}; + +#define FUNCTION(mux, fname, group) \ + [(TZ1090_MUX_ ## mux)] = { \ + .name = #fname, \ + .groups = group##_groups, \ + .ngroups = ARRAY_SIZE(group##_groups), \ + } +/* For intermediate functions with submuxes */ +#define NULL_FUNCTION(mux, fname) \ + [(TZ1090_MUX_ ## mux)] = { \ + .name = #fname, \ + } + +/* Must correlate with enum tz1090_mux */ +static const struct tz1090_function tz1090_functions[] = { + /* FUNCTION function name pingroups */ + FUNCTION(PERIP, perip, perip), + FUNCTION(SDH, sdh, sdh_sdio), + FUNCTION(SDIO, sdio, sdh_sdio), + FUNCTION(SPI1_CS2, spi1_cs2, spi1_cs2), + FUNCTION(PDM_DAC, pdm_dac, pdm_dac), + FUNCTION(USB_VBUS, usb_vbus, usb_vbus), + FUNCTION(AFE, afe, afe), + FUNCTION(TS_OUT_0, ts_out_0, afe), + FUNCTION(DAC, ext_dac, tft), + FUNCTION(NOT_IQADC_STB, not_iqadc_stb, tft), + FUNCTION(IQDAC_STB, iqdac_stb, tft), + FUNCTION(TFT, tft, tft), + NULL_FUNCTION(EXT_DAC, _ext_dac), + FUNCTION(TS_OUT_1, ts_out_1, tft), + FUNCTION(LCD_TRACE, lcd_trace, tft), + FUNCTION(PHY_RINGOSC, phy_ringosc, tft), +}; + +/* Sub muxes */ + +/** + * MUX() - Initialise a mux description. + * @f0: Function 0 (TZ1090_MUX_ is prepended, NA for none) + * @f1: Function 1 (TZ1090_MUX_ is prepended, NA for none) + * @f2: Function 2 (TZ1090_MUX_ is prepended, NA for none) + * @f3: Function 3 (TZ1090_MUX_ is prepended, NA for none) + * @f4: Function 4 (TZ1090_MUX_ is prepended, NA for none) + * @mux_r: Mux register (REG_PINCTRL_ is prepended) + * @mux_b: Bit number in register that the mux field begins + * @mux_w: Width of mux field in register + */ +#define MUX(f0, f1, f2, f3, f4, mux_r, mux_b, mux_w) \ + { \ + .funcs = { \ + TZ1090_MUX_ ## f0, \ + TZ1090_MUX_ ## f1, \ + TZ1090_MUX_ ## f2, \ + TZ1090_MUX_ ## f3, \ + TZ1090_MUX_ ## f4, \ + }, \ + .reg = (REG_PINCTRL_ ## mux_r), \ + .bit = (mux_b), \ + .width = (mux_w), \ + } + +/** + * DEFINE_SUBMUX() - Defines a submux description separate from a pin group. + * @mux: Mux name (_submux is appended) + * @f0: Function 0 (TZ1090_MUX_ is prepended, NA for none) + * @f1: Function 1 (TZ1090_MUX_ is prepended, NA for none) + * @f2: Function 2 (TZ1090_MUX_ is prepended, NA for none) + * @f3: Function 3 (TZ1090_MUX_ is prepended, NA for none) + * @f4: Function 4 (TZ1090_MUX_ is prepended, NA for none) + * @mux_r: Mux register (REG_PINCTRL_ is prepended) + * @mux_b: Bit number in register that the mux field begins + * @mux_w: Width of mux field in register + * + * A sub mux is a nested mux that can be bound to a magic function number used + * by another mux description. For example value 4 of the top level mux might + * correspond to a function which has a submux pointed to in tz1090_submux[]. + * The outer mux can then take on any function in the top level mux or the + * submux, and if a submux function is chosen both muxes are updated to route + * the signal from the submux. + * + * The submux can be defined with DEFINE_SUBMUX and pointed to from + * tz1090_submux[] using SUBMUX. + */ +#define DEFINE_SUBMUX(mux, f0, f1, f2, f3, f4, mux_r, mux_b, mux_w) \ + static struct tz1090_muxdesc mux ## _submux = \ + MUX(f0, f1, f2, f3, f4, mux_r, mux_b, mux_w) + +/** + * SUBMUX() - Link a submux to a function number. + * @f: Function name (TZ1090_MUX_ is prepended) + * @submux: Submux name (_submux is appended) + * + * For use in tz1090_submux[] initialisation to link an intermediate function + * number to a particular submux description. It indicates that when the + * function is chosen the signal is connected to the submux. + */ +#define SUBMUX(f, submux) [(TZ1090_MUX_ ## f)] = &(submux ## _submux) + +/** + * MUX_PG() - Initialise a pin group with mux control + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + * @f0: Function 0 (TZ1090_MUX_ is prepended, NA for none) + * @f1: Function 1 (TZ1090_MUX_ is prepended, NA for none) + * @f2: Function 2 (TZ1090_MUX_ is prepended, NA for none) + * @f3: Function 3 (TZ1090_MUX_ is prepended, NA for none) + * @f4: Function 4 (TZ1090_MUX_ is prepended, NA for none) + * @mux_r: Mux register (REG_PINCTRL_ is prepended) + * @mux_b: Bit number in register that the mux field begins + * @mux_w: Width of mux field in register + */ +#define MUX_PG(pg_name, f0, f1, f2, f3, f4, \ + mux_r, mux_b, mux_w) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .mux = MUX(f0, f1, f2, f3, f4, \ + mux_r, mux_b, mux_w), \ + } + +/** + * SIMPLE_PG() - Initialise a simple convenience pin group + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + * + * A simple pin group is simply used for binding pins together so they can be + * referred to by a single name instead of having to list every pin + * individually. + */ +#define SIMPLE_PG(pg_name) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + } + +/** + * DRV_PG() - Initialise a pin group with drive control + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + * @slw_b: Slew register bit. + * The same bit is used for Schmitt, and Drive (*2). + */ +#define DRV_PG(pg_name, slw_b) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .drv = true, \ + .slw_bit = (slw_b), \ + } + +/* + * Define main muxing pin groups + */ + +/* submuxes */ + +/* name f0, f1, f2, f3, f4, mux r/b/w */ +DEFINE_SUBMUX(ext_dac, DAC, NOT_IQADC_STB, IQDAC_STB, NA, NA, IF_CTL, 6, 2); + +/* bind submuxes to internal functions */ +static struct tz1090_muxdesc *tz1090_submux[] = { + SUBMUX(EXT_DAC, ext_dac), +}; + +/* + * These are the pin mux groups. Pin muxing can be enabled and disabled for each + * pin individually so these groups are internal. The mapping of pins to pin mux + * group is below (tz1090_mux_pins). + */ +static struct tz1090_pingroup tz1090_mux_groups[] = { + /* Muxing pin groups */ + /* pg_name, f0, f1, f2, f3, f4, mux r/b/w */ + MUX_PG(sdh, SDH, SDIO, NA, NA, NA, IF_CTL, 20, 2), + MUX_PG(sdio, SDIO, SDH, NA, NA, NA, IF_CTL, 16, 2), + MUX_PG(spi1_cs2, SPI1_CS2, USB_VBUS, NA, NA, NA, IF_CTL, 10, 2), + MUX_PG(pdm_d, PDM_DAC, USB_VBUS, NA, NA, NA, IF_CTL, 8, 2), + MUX_PG(afe, AFE, TS_OUT_0, NA, NA, NA, IF_CTL, 4, 2), + MUX_PG(tft, TFT, EXT_DAC, TS_OUT_1, LCD_TRACE, PHY_RINGOSC, IF_CTL, 0, 3), +}; + +/* + * This is the mapping from GPIO pins to pin mux groups in tz1090_mux_groups[]. + * Pins which aren't muxable to multiple peripherals are set to + * TZ1090_MUX_GROUP_MAX to enable the "perip" function to enable/disable + * peripheral control of the pin. + * + * This array is initialised in tz1090_init_mux_pins(). + */ +static u8 tz1090_mux_pins[NUM_GPIOS]; + +/* TZ1090_MUX_GROUP_MAX is used in tz1090_mux_pins[] for non-muxing pins */ +#define TZ1090_MUX_GROUP_MAX ARRAY_SIZE(tz1090_mux_groups) + +/** + * tz1090_init_mux_pins() - Initialise GPIO pin to mux group mapping. + * + * Initialises the tz1090_mux_pins[] array to be the inverse of the pin lists in + * each pin mux group in tz1090_mux_groups[]. + * + * It is assumed that no pin mux groups overlap (share pins). + */ +static void __init tz1090_init_mux_pins(void) +{ + unsigned int g, p; + const struct tz1090_pingroup *grp; + const unsigned int *pin; + + for (p = 0; p < NUM_GPIOS; ++p) + tz1090_mux_pins[p] = TZ1090_MUX_GROUP_MAX; + + grp = tz1090_mux_groups; + for (g = 0, grp = tz1090_mux_groups; + g < ARRAY_SIZE(tz1090_mux_groups); ++g, ++grp) + for (pin = grp->pins, p = 0; p < grp->npins; ++p, ++pin) + tz1090_mux_pins[*pin] = g; +} + +/* + * These are the externally visible pin groups. Some of them allow group control + * of drive configuration. Some are just simple convenience pingroups. All the + * internal pin mux groups in tz1090_mux_groups[] are mirrored here with the + * same pins. + * Pseudo pin groups follow in the group numbers after this array for each GPIO + * pin. Any group used for muxing must have all pins belonging to the same pin + * mux group. + */ +static struct tz1090_pingroup tz1090_groups[] = { + /* Pin groups with drive control (with no out of place pins) */ + /* pg_name, slw/schmitt/drv b */ + DRV_PG(jtag, 11 /* 11, 22 */), + DRV_PG(tft, 10 /* 10, 20 */), + DRV_PG(scb2, 9 /* 9, 18 */), + DRV_PG(spi0, 7 /* 7, 14 */), + DRV_PG(uart, 5 /* 5, 10 */), + DRV_PG(scb1, 4 /* 4, 8 */), + DRV_PG(spi1, 3 /* 3, 6 */), + DRV_PG(afe, 0 /* 0, 0 */), + + /* + * Drive specific pin groups (with odd combinations of pins which makes + * the pin group naming somewhat arbitrary) + */ + /* pg_name, slw/schmitt/drv b */ + DRV_PG(drive_sdio, 8 /* 8, 16 */), /* sdio_* + sdh_* */ + DRV_PG(drive_i2s, 6 /* 6, 12 */), /* i2s_* + clk_out1 */ + DRV_PG(drive_scb0, 2 /* 2, 4 */), /* scb0_* + pdm_{c,d} */ + DRV_PG(drive_pdm, 1 /* 1, 2 */), /* pdm_{a,b} + clk_out0 */ + + /* Convenience pin groups */ + /* pg_name */ + SIMPLE_PG(uart0), + SIMPLE_PG(uart1), + SIMPLE_PG(scb0), + SIMPLE_PG(i2s), + SIMPLE_PG(sdh), + SIMPLE_PG(sdio), + + /* pseudo-pingroups for each GPIO pin follow */ +}; + +/** + * struct tz1090_pmx - Private pinctrl data + * @dev: Platform device + * @pctl: Pin control device + * @regs: Register region + * @lock: Lock protecting coherency of pin_en, gpio_en, and SELECT regs + * @pin_en: Pins that have been enabled (32 pins packed into each element) + * @gpio_en: GPIOs that have been enabled (32 pins packed into each element) + */ +struct tz1090_pmx { + struct device *dev; + struct pinctrl_dev *pctl; + void __iomem *regs; + spinlock_t lock; + u32 pin_en[3]; + u32 gpio_en[3]; +}; + +static inline u32 pmx_read(struct tz1090_pmx *pmx, u32 reg) +{ + return ioread32(pmx->regs + reg); +} + +static inline void pmx_write(struct tz1090_pmx *pmx, u32 val, u32 reg) +{ + iowrite32(val, pmx->regs + reg); +} + +/* + * Pin control operations + */ + +/* each GPIO pin has it's own pseudo pingroup containing only itself */ + +static int tz1090_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(tz1090_groups) + NUM_GPIOS; +} + +static const char *tz1090_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int group) +{ + if (group < ARRAY_SIZE(tz1090_groups)) { + /* normal pingroup */ + return tz1090_groups[group].name; + } else { + /* individual gpio pin pseudo-pingroup */ + unsigned int pin = group - ARRAY_SIZE(tz1090_groups); + return tz1090_pins[pin].name; + } +} + +static int tz1090_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int group, + const unsigned int **pins, + unsigned int *num_pins) +{ + if (group < ARRAY_SIZE(tz1090_groups)) { + /* normal pingroup */ + *pins = tz1090_groups[group].pins; + *num_pins = tz1090_groups[group].npins; + } else { + /* individual gpio pin pseudo-pingroup */ + unsigned int pin = group - ARRAY_SIZE(tz1090_groups); + *pins = &tz1090_pins[pin].number; + *num_pins = 1; + } + + return 0; +} + +#ifdef CONFIG_DEBUG_FS +static void tz1090_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned int offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} +#endif + +static int reserve_map(struct device *dev, struct pinctrl_map **map, + unsigned int *reserved_maps, unsigned int *num_maps, + unsigned int reserve) +{ + unsigned int old_num = *reserved_maps; + unsigned int new_num = *num_maps + reserve; + struct pinctrl_map *new_map; + + if (old_num >= new_num) + return 0; + + new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL); + if (!new_map) { + dev_err(dev, "krealloc(map) failed\n"); + return -ENOMEM; + } + + memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map)); + + *map = new_map; + *reserved_maps = new_num; + + return 0; +} + +static int add_map_mux(struct pinctrl_map **map, unsigned int *reserved_maps, + unsigned int *num_maps, const char *group, + const char *function) +{ + if (WARN_ON(*num_maps == *reserved_maps)) + return -ENOSPC; + + (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[*num_maps].data.mux.group = group; + (*map)[*num_maps].data.mux.function = function; + (*num_maps)++; + + return 0; +} + +static int add_map_configs(struct device *dev, + struct pinctrl_map **map, + unsigned int *reserved_maps, unsigned int *num_maps, + const char *group, unsigned long *configs, + unsigned int num_configs) +{ + unsigned long *dup_configs; + + if (WARN_ON(*num_maps == *reserved_maps)) + return -ENOSPC; + + dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), + GFP_KERNEL); + if (!dup_configs) { + dev_err(dev, "kmemdup(configs) failed\n"); + return -ENOMEM; + } + + (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_GROUP; + (*map)[*num_maps].data.configs.group_or_pin = group; + (*map)[*num_maps].data.configs.configs = dup_configs; + (*map)[*num_maps].data.configs.num_configs = num_configs; + (*num_maps)++; + + return 0; +} + +static void tz1090_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, + unsigned int num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) + kfree(map[i].data.configs.configs); + + kfree(map); +} + +static int tz1090_pinctrl_dt_subnode_to_map(struct device *dev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *reserved_maps, + unsigned int *num_maps) +{ + int ret; + const char *function; + unsigned long *configs = NULL; + unsigned int num_configs = 0; + unsigned int reserve; + struct property *prop; + const char *group; + + ret = of_property_read_string(np, "tz1090,function", &function); + if (ret < 0) { + /* EINVAL=missing, which is fine since it's optional */ + if (ret != -EINVAL) + dev_err(dev, "could not parse property function\n"); + function = NULL; + } + + ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs); + if (ret) + return ret; + + reserve = 0; + if (function != NULL) + reserve++; + if (num_configs) + reserve++; + ret = of_property_count_strings(np, "tz1090,pins"); + if (ret < 0) { + dev_err(dev, "could not parse property pins\n"); + goto exit; + } + reserve *= ret; + + ret = reserve_map(dev, map, reserved_maps, num_maps, reserve); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "tz1090,pins", prop, group) { + if (function) { + ret = add_map_mux(map, reserved_maps, num_maps, + group, function); + if (ret < 0) + goto exit; + } + + if (num_configs) { + ret = add_map_configs(dev, map, reserved_maps, + num_maps, group, configs, + num_configs); + if (ret < 0) + goto exit; + } + } + + ret = 0; + +exit: + kfree(configs); + return ret; +} + +static int tz1090_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, + unsigned int *num_maps) +{ + unsigned int reserved_maps; + struct device_node *np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np_config, np) { + ret = tz1090_pinctrl_dt_subnode_to_map(pctldev->dev, np, map, + &reserved_maps, + num_maps); + if (ret < 0) { + tz1090_pinctrl_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + + return 0; +} + +static struct pinctrl_ops tz1090_pinctrl_ops = { + .get_groups_count = tz1090_pinctrl_get_groups_count, + .get_group_name = tz1090_pinctrl_get_group_name, + .get_group_pins = tz1090_pinctrl_get_group_pins, +#ifdef CONFIG_DEBUG_FS + .pin_dbg_show = tz1090_pinctrl_pin_dbg_show, +#endif + .dt_node_to_map = tz1090_pinctrl_dt_node_to_map, + .dt_free_map = tz1090_pinctrl_dt_free_map, +}; + +/* + * Pin mux operations + */ + +static int tz1090_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(tz1090_functions); +} + +static const char *tz1090_pinctrl_get_func_name(struct pinctrl_dev *pctldev, + unsigned int function) +{ + return tz1090_functions[function].name; +} + +static int tz1090_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, + unsigned int function, + const char * const **groups, + unsigned int * const num_groups) +{ + /* pingroup functions */ + *groups = tz1090_functions[function].groups; + *num_groups = tz1090_functions[function].ngroups; + return 0; +} + +/** + * tz1090_pinctrl_select() - update bit in SELECT register + * @pmx: Pinmux data + * @pin: Pin number (must be within GPIO range) + */ +static void tz1090_pinctrl_select(struct tz1090_pmx *pmx, + unsigned int pin) +{ + u32 reg, reg_shift, select, val; + unsigned int pmx_index, pmx_shift; + unsigned long flags; + + /* uses base 32 instead of base 30 */ + pmx_index = pin >> 5; + pmx_shift = pin & 0x1f; + + /* select = !perip || gpio */ + select = ((~pmx->pin_en[pmx_index] | + pmx->gpio_en[pmx_index]) >> pmx_shift) & 1; + + /* find register and bit offset (base 30) */ + reg = REG_PINCTRL_SELECT + 4*(pin / 30); + reg_shift = pin % 30; + + /* modify gpio select bit */ + __global_lock2(flags); + val = pmx_read(pmx, reg); + val &= ~BIT(reg_shift); + val |= select << reg_shift; + pmx_write(pmx, val, reg); + __global_unlock2(flags); +} + +/** + * tz1090_pinctrl_gpio_select() - enable/disable GPIO usage for a pin + * @pmx: Pinmux data + * @pin: Pin number + * @gpio_select: true to enable pin as GPIO, + * false to leave control to whatever function is enabled + * + * Records that GPIO usage is enabled/disabled so that enabling a function + * doesn't override the SELECT register bit. + */ +static void tz1090_pinctrl_gpio_select(struct tz1090_pmx *pmx, + unsigned int pin, + bool gpio_select) +{ + unsigned int index, shift; + u32 gpio_en; + + if (pin >= NUM_GPIOS) + return; + + /* uses base 32 instead of base 30 */ + index = pin >> 5; + shift = pin & 0x1f; + + spin_lock(&pmx->lock); + + /* keep a record whether gpio is selected */ + gpio_en = pmx->gpio_en[index]; + gpio_en &= ~BIT(shift); + if (gpio_select) + gpio_en |= BIT(shift); + pmx->gpio_en[index] = gpio_en; + + /* update the select bit */ + tz1090_pinctrl_select(pmx, pin); + + spin_unlock(&pmx->lock); +} + +/** + * tz1090_pinctrl_perip_select() - enable/disable peripheral interface for a pin + * @pmx: Pinmux data + * @pin: Pin number + * @perip_select: true to enable peripheral interface when not GPIO, + * false to leave pin in GPIO mode + * + * Records that peripheral usage is enabled/disabled so that SELECT register can + * be set appropriately when GPIO is disabled. + */ +static void tz1090_pinctrl_perip_select(struct tz1090_pmx *pmx, + unsigned int pin, + bool perip_select) +{ + unsigned int index, shift; + u32 pin_en; + + if (pin >= NUM_GPIOS) + return; + + /* uses base 32 instead of base 30 */ + index = pin >> 5; + shift = pin & 0x1f; + + spin_lock(&pmx->lock); + + /* keep a record whether peripheral is selected */ + pin_en = pmx->pin_en[index]; + pin_en &= ~BIT(shift); + if (perip_select) + pin_en |= BIT(shift); + pmx->pin_en[index] = pin_en; + + /* update the select bit */ + tz1090_pinctrl_select(pmx, pin); + + spin_unlock(&pmx->lock); +} + +/** + * tz1090_pinctrl_enable_mux() - Switch a pin mux group to a function. + * @pmx: Pinmux data + * @desc: Pinmux description + * @function: Function to switch to + * + * Enable a particular function on a pin mux group. Since pin mux descriptions + * are nested this function is recursive. + */ +static int tz1090_pinctrl_enable_mux(struct tz1090_pmx *pmx, + const struct tz1090_muxdesc *desc, + unsigned int function) +{ + const int *fit; + unsigned long flags; + int mux; + unsigned int func, ret; + u32 reg, mask; + + /* find the mux value for this function, searching recursively */ + for (mux = 0, fit = desc->funcs; + mux < ARRAY_SIZE(desc->funcs); ++mux, ++fit) { + func = *fit; + if (func == function) + goto found_mux; + + /* maybe it's a sub-mux */ + if (func < ARRAY_SIZE(tz1090_submux) && tz1090_submux[func]) { + ret = tz1090_pinctrl_enable_mux(pmx, + tz1090_submux[func], + function); + if (!ret) + goto found_mux; + } + } + + return -EINVAL; +found_mux: + + /* Set up the mux */ + if (desc->width) { + mask = (BIT(desc->width) - 1) << desc->bit; + __global_lock2(flags); + reg = pmx_read(pmx, desc->reg); + reg &= ~mask; + reg |= (mux << desc->bit) & mask; + pmx_write(pmx, reg, desc->reg); + __global_unlock2(flags); + } + + return 0; +} + +/** + * tz1090_pinctrl_enable() - Enable a function on a pin group. + * @pctldev: Pin control data + * @function: Function index to enable + * @group: Group index to enable + * + * Enable a particular function on a group of pins. The per GPIO pin pseudo pin + * groups can be used (in which case the pin will be enabled in peripheral mode + * and if it belongs to a pin mux group the mux will be switched if it isn't + * already in use. Some convenience pin groups can also be used in which case + * the effect is the same as enabling the function on each individual pin in the + * group. + */ +static int tz1090_pinctrl_enable(struct pinctrl_dev *pctldev, + unsigned int function, unsigned int group) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + struct tz1090_pingroup *grp; + int ret; + unsigned int pin_num, mux_group, i, npins; + const unsigned int *pins; + + /* group of pins? */ + if (group < ARRAY_SIZE(tz1090_groups)) { + grp = &tz1090_groups[group]; + npins = grp->npins; + pins = grp->pins; + /* + * All pins in the group must belong to the same mux group, + * which allows us to just use the mux group of the first pin. + * By explicitly listing permitted pingroups for each function + * the pinmux core should ensure this is always the case. + */ + } else { + pin_num = group - ARRAY_SIZE(tz1090_groups); + npins = 1; + pins = &pin_num; + } + mux_group = tz1090_mux_pins[*pins]; + + /* no mux group, but can still be individually muxed to peripheral */ + if (mux_group >= TZ1090_MUX_GROUP_MAX) { + if (function == TZ1090_MUX_PERIP) + goto mux_pins; + return -EINVAL; + } + + /* mux group already set to a different function? */ + grp = &tz1090_mux_groups[mux_group]; + if (grp->func_count && grp->func != function) { + dev_err(pctldev->dev, + "%s: can't mux pin(s) to '%s', group already muxed to '%s'\n", + __func__, tz1090_functions[function].name, + tz1090_functions[grp->func].name); + return -EBUSY; + } + + dev_dbg(pctldev->dev, "%s: muxing %u pin(s) in '%s' to '%s'\n", + __func__, npins, grp->name, tz1090_functions[function].name); + + /* if first pin in mux group to be enabled, enable the group mux */ + if (!grp->func_count) { + grp->func = function; + ret = tz1090_pinctrl_enable_mux(pmx, &grp->mux, function); + if (ret) + return ret; + } + /* add pins to ref count and mux individually to peripheral */ + grp->func_count += npins; +mux_pins: + for (i = 0; i < npins; ++i) + tz1090_pinctrl_perip_select(pmx, pins[i], true); + + return 0; +} + +/** + * tz1090_pinctrl_disable() - Disable a function on a pin group. + * @pctldev: Pin control data + * @function: Function index to disable + * @group: Group index to disable + * + * Disable a particular function on a group of pins. The per GPIO pin pseudo pin + * groups can be used (in which case the pin will be taken out of peripheral + * mode. Some convenience pin groups can also be used in which case the effect + * is the same as enabling the function on each individual pin in the group. + */ +static void tz1090_pinctrl_disable(struct pinctrl_dev *pctldev, + unsigned int function, unsigned int group) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + struct tz1090_pingroup *grp; + unsigned int pin_num, mux_group, i, npins; + const unsigned int *pins; + + /* group of pins? */ + if (group < ARRAY_SIZE(tz1090_groups)) { + grp = &tz1090_groups[group]; + npins = grp->npins; + pins = grp->pins; + /* + * All pins in the group must belong to the same mux group, + * which allows us to just use the mux group of the first pin. + * By explicitly listing permitted pingroups for each function + * the pinmux core should ensure this is always the case. + */ + } else { + pin_num = group - ARRAY_SIZE(tz1090_groups); + npins = 1; + pins = &pin_num; + } + mux_group = tz1090_mux_pins[*pins]; + + /* no mux group, but can still be individually muxed to peripheral */ + if (mux_group >= TZ1090_MUX_GROUP_MAX) { + if (function == TZ1090_MUX_PERIP) + goto unmux_pins; + return; + } + + /* mux group already set to a different function? */ + grp = &tz1090_mux_groups[mux_group]; + dev_dbg(pctldev->dev, "%s: unmuxing %u pin(s) in '%s' from '%s'\n", + __func__, npins, grp->name, tz1090_functions[function].name); + + /* subtract pins from ref count and unmux individually */ + WARN_ON(grp->func_count < npins); + grp->func_count -= npins; +unmux_pins: + for (i = 0; i < npins; ++i) + tz1090_pinctrl_perip_select(pmx, pins[i], false); +} + +/** + * tz1090_pinctrl_gpio_request_enable() - Put pin in GPIO mode. + * @pctldev: Pin control data + * @range: GPIO range + * @pin: Pin number + * + * Puts a particular pin into GPIO mode, disabling peripheral control until it's + * disabled again. + */ +static int tz1090_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + tz1090_pinctrl_gpio_select(pmx, pin, true); + return 0; +} + +/** + * tz1090_pinctrl_gpio_disable_free() - Take pin out of GPIO mode. + * @pctldev: Pin control data + * @range: GPIO range + * @pin: Pin number + * + * Take a particular pin out of GPIO mode. If the pin is enabled for a + * peripheral it will return to peripheral mode. + */ +static void tz1090_pinctrl_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + tz1090_pinctrl_gpio_select(pmx, pin, false); +} + +static struct pinmux_ops tz1090_pinmux_ops = { + .get_functions_count = tz1090_pinctrl_get_funcs_count, + .get_function_name = tz1090_pinctrl_get_func_name, + .get_function_groups = tz1090_pinctrl_get_func_groups, + .enable = tz1090_pinctrl_enable, + .disable = tz1090_pinctrl_disable, + .gpio_request_enable = tz1090_pinctrl_gpio_request_enable, + .gpio_disable_free = tz1090_pinctrl_gpio_disable_free, +}; + +/* + * Pin config operations + */ + +struct tz1090_pinconf_pullup { + unsigned char index; + unsigned char shift; +}; + +/* The mapping of pin to pull up/down register index and shift */ +static struct tz1090_pinconf_pullup tz1090_pinconf_pullup[] = { + {5, 22}, /* 0 - TZ1090_PIN_SDIO_CLK */ + {0, 14}, /* 1 - TZ1090_PIN_SDIO_CMD */ + {0, 6}, /* 2 - TZ1090_PIN_SDIO_D0 */ + {0, 8}, /* 3 - TZ1090_PIN_SDIO_D1 */ + {0, 10}, /* 4 - TZ1090_PIN_SDIO_D2 */ + {0, 12}, /* 5 - TZ1090_PIN_SDIO_D3 */ + {0, 2}, /* 6 - TZ1090_PIN_SDH_CD */ + {0, 4}, /* 7 - TZ1090_PIN_SDH_WP */ + {0, 16}, /* 8 - TZ1090_PIN_SPI0_MCLK */ + {0, 18}, /* 9 - TZ1090_PIN_SPI0_CS0 */ + {0, 20}, /* 10 - TZ1090_PIN_SPI0_CS1 */ + {0, 22}, /* 11 - TZ1090_PIN_SPI0_CS2 */ + {0, 24}, /* 12 - TZ1090_PIN_SPI0_DOUT */ + {0, 26}, /* 13 - TZ1090_PIN_SPI0_DIN */ + {0, 28}, /* 14 - TZ1090_PIN_SPI1_MCLK */ + {0, 30}, /* 15 - TZ1090_PIN_SPI1_CS0 */ + {1, 0}, /* 16 - TZ1090_PIN_SPI1_CS1 */ + {1, 2}, /* 17 - TZ1090_PIN_SPI1_CS2 */ + {1, 4}, /* 18 - TZ1090_PIN_SPI1_DOUT */ + {1, 6}, /* 19 - TZ1090_PIN_SPI1_DIN */ + {1, 8}, /* 20 - TZ1090_PIN_UART0_RXD */ + {1, 10}, /* 21 - TZ1090_PIN_UART0_TXD */ + {1, 12}, /* 22 - TZ1090_PIN_UART0_CTS */ + {1, 14}, /* 23 - TZ1090_PIN_UART0_RTS */ + {1, 16}, /* 24 - TZ1090_PIN_UART1_RXD */ + {1, 18}, /* 25 - TZ1090_PIN_UART1_TXD */ + {1, 20}, /* 26 - TZ1090_PIN_SCB0_SDAT */ + {1, 22}, /* 27 - TZ1090_PIN_SCB0_SCLK */ + {1, 24}, /* 28 - TZ1090_PIN_SCB1_SDAT */ + {1, 26}, /* 29 - TZ1090_PIN_SCB1_SCLK */ + + {1, 28}, /* 30 - TZ1090_PIN_SCB2_SDAT */ + {1, 30}, /* 31 - TZ1090_PIN_SCB2_SCLK */ + {2, 0}, /* 32 - TZ1090_PIN_I2S_MCLK */ + {2, 2}, /* 33 - TZ1090_PIN_I2S_BCLK_OUT */ + {2, 4}, /* 34 - TZ1090_PIN_I2S_LRCLK_OUT */ + {2, 6}, /* 35 - TZ1090_PIN_I2S_DOUT0 */ + {2, 8}, /* 36 - TZ1090_PIN_I2S_DOUT1 */ + {2, 10}, /* 37 - TZ1090_PIN_I2S_DOUT2 */ + {2, 12}, /* 38 - TZ1090_PIN_I2S_DIN */ + {4, 12}, /* 39 - TZ1090_PIN_PDM_A */ + {4, 14}, /* 40 - TZ1090_PIN_PDM_B */ + {4, 18}, /* 41 - TZ1090_PIN_PDM_C */ + {4, 20}, /* 42 - TZ1090_PIN_PDM_D */ + {2, 14}, /* 43 - TZ1090_PIN_TFT_RED0 */ + {2, 16}, /* 44 - TZ1090_PIN_TFT_RED1 */ + {2, 18}, /* 45 - TZ1090_PIN_TFT_RED2 */ + {2, 20}, /* 46 - TZ1090_PIN_TFT_RED3 */ + {2, 22}, /* 47 - TZ1090_PIN_TFT_RED4 */ + {2, 24}, /* 48 - TZ1090_PIN_TFT_RED5 */ + {2, 26}, /* 49 - TZ1090_PIN_TFT_RED6 */ + {2, 28}, /* 50 - TZ1090_PIN_TFT_RED7 */ + {2, 30}, /* 51 - TZ1090_PIN_TFT_GREEN0 */ + {3, 0}, /* 52 - TZ1090_PIN_TFT_GREEN1 */ + {3, 2}, /* 53 - TZ1090_PIN_TFT_GREEN2 */ + {3, 4}, /* 54 - TZ1090_PIN_TFT_GREEN3 */ + {3, 6}, /* 55 - TZ1090_PIN_TFT_GREEN4 */ + {3, 8}, /* 56 - TZ1090_PIN_TFT_GREEN5 */ + {3, 10}, /* 57 - TZ1090_PIN_TFT_GREEN6 */ + {3, 12}, /* 58 - TZ1090_PIN_TFT_GREEN7 */ + {3, 14}, /* 59 - TZ1090_PIN_TFT_BLUE0 */ + + {3, 16}, /* 60 - TZ1090_PIN_TFT_BLUE1 */ + {3, 18}, /* 61 - TZ1090_PIN_TFT_BLUE2 */ + {3, 20}, /* 62 - TZ1090_PIN_TFT_BLUE3 */ + {3, 22}, /* 63 - TZ1090_PIN_TFT_BLUE4 */ + {3, 24}, /* 64 - TZ1090_PIN_TFT_BLUE5 */ + {3, 26}, /* 65 - TZ1090_PIN_TFT_BLUE6 */ + {3, 28}, /* 66 - TZ1090_PIN_TFT_BLUE7 */ + {3, 30}, /* 67 - TZ1090_PIN_TFT_VDDEN_GD */ + {4, 0}, /* 68 - TZ1090_PIN_TFT_PANELCLK */ + {4, 2}, /* 69 - TZ1090_PIN_TFT_BLANK_LS */ + {4, 4}, /* 70 - TZ1090_PIN_TFT_VSYNC_NS */ + {4, 6}, /* 71 - TZ1090_PIN_TFT_HSYNC_NR */ + {4, 8}, /* 72 - TZ1090_PIN_TFT_VD12ACB */ + {4, 10}, /* 73 - TZ1090_PIN_TFT_PWRSAVE */ + {4, 24}, /* 74 - TZ1090_PIN_TX_ON */ + {4, 26}, /* 75 - TZ1090_PIN_RX_ON */ + {4, 28}, /* 76 - TZ1090_PIN_PLL_ON */ + {4, 30}, /* 77 - TZ1090_PIN_PA_ON */ + {5, 0}, /* 78 - TZ1090_PIN_RX_HP */ + {5, 6}, /* 79 - TZ1090_PIN_GAIN0 */ + {5, 8}, /* 80 - TZ1090_PIN_GAIN1 */ + {5, 10}, /* 81 - TZ1090_PIN_GAIN2 */ + {5, 12}, /* 82 - TZ1090_PIN_GAIN3 */ + {5, 14}, /* 83 - TZ1090_PIN_GAIN4 */ + {5, 16}, /* 84 - TZ1090_PIN_GAIN5 */ + {5, 18}, /* 85 - TZ1090_PIN_GAIN6 */ + {5, 20}, /* 86 - TZ1090_PIN_GAIN7 */ + {5, 2}, /* 87 - TZ1090_PIN_ANT_SEL0 */ + {5, 4}, /* 88 - TZ1090_PIN_ANT_SEL1 */ + {0, 0}, /* 89 - TZ1090_PIN_SDH_CLK_IN */ + + {5, 24}, /* 90 - TZ1090_PIN_TCK */ + {5, 26}, /* 91 - TZ1090_PIN_TRST */ + {5, 28}, /* 92 - TZ1090_PIN_TDI */ + {5, 30}, /* 93 - TZ1090_PIN_TDO */ + {6, 0}, /* 94 - TZ1090_PIN_TMS */ + {4, 16}, /* 95 - TZ1090_PIN_CLK_OUT0 */ + {4, 22}, /* 96 - TZ1090_PIN_CLK_OUT1 */ +}; + +static int tz1090_pinconf_reg(struct pinctrl_dev *pctldev, + unsigned int pin, + enum pin_config_param param, + bool report_err, + u32 *reg, u32 *width, u32 *mask, u32 *shift, + u32 *val) +{ + struct tz1090_pinconf_pullup *pu; + + /* All supported pins have controllable input bias */ + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + *val = REG_PU_PD_TRISTATE; + break; + case PIN_CONFIG_BIAS_PULL_UP: + *val = REG_PU_PD_UP; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + *val = REG_PU_PD_DOWN; + break; + case PIN_CONFIG_BIAS_BUS_HOLD: + *val = REG_PU_PD_REPEATER; + break; + default: + return -ENOTSUPP; + }; + + /* Only input bias parameters supported */ + pu = &tz1090_pinconf_pullup[pin]; + *reg = REG_PINCTRL_PU_PD + 4*pu->index; + *shift = pu->shift; + *width = 2; + + /* Calculate field information */ + *mask = (BIT(*width) - 1) << *shift; + + return 0; +} + +static int tz1090_pinconf_get(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long *config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + int ret; + u32 reg, width, mask, shift, val, tmp, arg; + + /* Get register information */ + ret = tz1090_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; + + /* Extract field from register */ + tmp = pmx_read(pmx, reg); + arg = ((tmp & mask) >> shift) == val; + + /* Config not active */ + if (!arg) + return -EINVAL; + + /* And pack config */ + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int tz1090_pinconf_set(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(config); + unsigned int arg = pinconf_to_config_argument(config); + int ret; + u32 reg, width, mask, shift, val, tmp; + unsigned long flags; + + dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n", + __func__, tz1090_pins[pin].name, config); + + /* Get register information */ + ret = tz1090_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; + + /* Unpack argument and range check it */ + if (arg > 1) { + dev_dbg(pctldev->dev, "%s: arg %u out of range\n", + __func__, arg); + return -EINVAL; + } + + /* Write register field */ + __global_lock2(flags); + tmp = pmx_read(pmx, reg); + tmp &= ~mask; + if (arg) + tmp |= val << shift; + pmx_write(pmx, tmp, reg); + __global_unlock2(flags); + + return 0; +} + +static const int tz1090_boolean_map[] = { + [0] = -EINVAL, + [1] = 1, +}; + +static const int tz1090_dr_map[] = { + [REG_DR_2mA] = 2, + [REG_DR_4mA] = 4, + [REG_DR_8mA] = 8, + [REG_DR_12mA] = 12, +}; + +static int tz1090_pinconf_group_reg(struct pinctrl_dev *pctldev, + const struct tz1090_pingroup *g, + enum pin_config_param param, + bool report_err, + u32 *reg, u32 *width, u32 *mask, u32 *shift, + const int **map) +{ + /* Drive configuration applies in groups, but not to all groups. */ + if (!g->drv) { + if (report_err) + dev_dbg(pctldev->dev, + "%s: group %s has no drive control\n", + __func__, g->name); + return -ENOTSUPP; + } + + /* Find information about drive parameter's register */ + switch (param) { + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + *reg = REG_PINCTRL_SCHMITT; + *width = 1; + *map = tz1090_boolean_map; + break; + case PIN_CONFIG_SLEW_RATE: + *reg = REG_PINCTRL_SR; + *width = 1; + *map = tz1090_boolean_map; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + *reg = REG_PINCTRL_DR; + *width = 2; + *map = tz1090_dr_map; + break; + default: + return -ENOTSUPP; + }; + + /* Calculate field information */ + *shift = g->slw_bit * *width; + *mask = (BIT(*width) - 1) << *shift; + + return 0; +} + +static int tz1090_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned int group, + unsigned long *config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pingroup *g; + enum pin_config_param param = pinconf_to_config_param(*config); + int ret, arg; + unsigned int pin; + u32 reg, width, mask, shift, val; + const int *map; + + if (group >= ARRAY_SIZE(tz1090_groups)) { + pin = group - ARRAY_SIZE(tz1090_groups); + return tz1090_pinconf_get(pctldev, pin, config); + } + + g = &tz1090_groups[group]; + if (g->npins == 1) { + pin = g->pins[0]; + ret = tz1090_pinconf_get(pctldev, pin, config); + if (ret != -ENOTSUPP) + return ret; + } + + /* Get register information */ + ret = tz1090_pinconf_group_reg(pctldev, g, param, true, + ®, &width, &mask, &shift, &map); + if (ret < 0) + return ret; + + /* Extract field from register */ + val = pmx_read(pmx, reg); + arg = map[(val & mask) >> shift]; + if (arg < 0) + return arg; + + /* And pack config */ + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int tz1090_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned int group, unsigned long config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pingroup *g; + enum pin_config_param param = pinconf_to_config_param(config); + unsigned int arg, pin, i; + const unsigned int *pit; + int ret; + u32 reg, width, mask, shift, val; + unsigned long flags; + const int *map; + + if (group >= ARRAY_SIZE(tz1090_groups)) { + pin = group - ARRAY_SIZE(tz1090_groups); + return tz1090_pinconf_set(pctldev, pin, config); + } + + g = &tz1090_groups[group]; + if (g->npins == 1) { + pin = g->pins[0]; + ret = tz1090_pinconf_set(pctldev, pin, config); + if (ret != -ENOTSUPP) + return ret; + } + + dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n", + __func__, g->name, config); + + /* Get register information */ + ret = tz1090_pinconf_group_reg(pctldev, g, param, true, + ®, &width, &mask, &shift, &map); + if (ret < 0) { + /* + * Maybe we're trying to set a per-pin configuration of a group, + * so do the pins one by one. This is mainly as a convenience. + */ + for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) { + ret = tz1090_pinconf_set(pctldev, *pit, config); + if (ret) + return ret; + } + return 0; + } + + /* Unpack argument and map it to register value */ + arg = pinconf_to_config_argument(config); + for (i = 0; i < BIT(width); ++i) { + if (map[i] == arg || (map[i] == -EINVAL && !arg)) { + /* Write register field */ + __global_lock2(flags); + val = pmx_read(pmx, reg); + val &= ~mask; + val |= i << shift; + pmx_write(pmx, val, reg); + __global_unlock2(flags); + return 0; + } + } + + dev_dbg(pctldev->dev, "%s: arg %u not supported\n", + __func__, arg); + return -EINVAL; +} + +static struct pinconf_ops tz1090_pinconf_ops = { + .is_generic = true, + .pin_config_get = tz1090_pinconf_get, + .pin_config_set = tz1090_pinconf_set, + .pin_config_group_get = tz1090_pinconf_group_get, + .pin_config_group_set = tz1090_pinconf_group_set, + .pin_config_config_dbg_show = pinconf_generic_dump_config, +}; + +/* + * Pin control driver setup + */ + +static struct pinctrl_desc tz1090_pinctrl_desc = { + .pctlops = &tz1090_pinctrl_ops, + .pmxops = &tz1090_pinmux_ops, + .confops = &tz1090_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int tz1090_pinctrl_probe(struct platform_device *pdev) +{ + struct tz1090_pmx *pmx; + struct resource *res; + + pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL); + if (!pmx) { + dev_err(&pdev->dev, "Can't alloc tz1090_pmx\n"); + return -ENOMEM; + } + pmx->dev = &pdev->dev; + spin_lock_init(&pmx->lock); + + tz1090_pinctrl_desc.name = dev_name(&pdev->dev); + tz1090_pinctrl_desc.pins = tz1090_pins; + tz1090_pinctrl_desc.npins = ARRAY_SIZE(tz1090_pins); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing MEM resource\n"); + return -ENODEV; + } + + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), + dev_name(&pdev->dev))) { + dev_err(&pdev->dev, + "Couldn't request MEM resource\n"); + return -ENODEV; + } + + pmx->regs = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!pmx->regs) { + dev_err(&pdev->dev, "Couldn't ioremap regs\n"); + return -ENODEV; + } + + pmx->pctl = pinctrl_register(&tz1090_pinctrl_desc, &pdev->dev, pmx); + if (!pmx->pctl) { + dev_err(&pdev->dev, "Couldn't register pinctrl driver\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, pmx); + + dev_info(&pdev->dev, "TZ1090 pinctrl driver initialised\n"); + + return 0; +} + +static int tz1090_pinctrl_remove(struct platform_device *pdev) +{ + struct tz1090_pmx *pmx = platform_get_drvdata(pdev); + + pinctrl_unregister(pmx->pctl); + + return 0; +} + +static struct of_device_id tz1090_pinctrl_of_match[] = { + { .compatible = "img,tz1090-pinctrl", }, + { }, +}; + +static struct platform_driver tz1090_pinctrl_driver = { + .driver = { + .name = "tz1090-pinctrl", + .owner = THIS_MODULE, + .of_match_table = tz1090_pinctrl_of_match, + }, + .probe = tz1090_pinctrl_probe, + .remove = tz1090_pinctrl_remove, +}; + +static int __init tz1090_pinctrl_init(void) +{ + tz1090_init_mux_pins(); + return platform_driver_register(&tz1090_pinctrl_driver); +} +arch_initcall(tz1090_pinctrl_init); + +static void __exit tz1090_pinctrl_exit(void) +{ + platform_driver_unregister(&tz1090_pinctrl_driver); +} +module_exit(tz1090_pinctrl_exit); + +MODULE_AUTHOR("Imagination Technologies Ltd."); +MODULE_DESCRIPTION("Toumaz Xenif TZ1090 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, tz1090_pinctrl_of_match);