From: Steve Kipisz Date: Mon, 18 Apr 2011 21:27:00 +0000 (-0400) Subject: OMAP3: BeagleBoard: Enable pullups on i2c2. X-Git-Tag: v2011.06-rc1~131^2~53 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d4e53f063dd25e071444b87303573e7440deeb89;p=kernel%2Fu-boot.git OMAP3: BeagleBoard: Enable pullups on i2c2. This allows the reading of EEPROMS on the expansion bus without adding external pull-ups. Signed-off-by: Jason Kridner Signed-off-by: Steve Kipisz Signed-off-by: Sandeep Paulraj --- diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 3957c79..cc2b541 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -50,6 +50,20 @@ /* CONTROL */ #define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) +#ifndef __ASSEMBLY__ +/* Signal Integrity Parameter Control Registers */ +struct control_prog_io { + unsigned char res[0x408]; + unsigned int io2; /* 0x408 */ + unsigned char res2[0x38]; + unsigned int io0; /* 0x444 */ + unsigned int io1; /* 0x448 */ +}; +#endif /* __ASSEMBLY__ */ + +/* Bit definition for CONTROL_PROG_IO1 */ +#define PRG_I2C2_PULLUPRESX 0x00000001 + /* UART */ #define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) #define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 89e3dba..2fdee7c 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -155,6 +155,10 @@ int misc_init_r(void) { struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; + struct control_prog_io *prog_io_base = (struct gpio *)OMAP34XX_CTRL_BASE; + + /* Enable i2c2 pullup resisters */ + writel(~(PRG_I2C2_PULLUPRESX), &prog_io_base->io1); switch (get_board_revision()) { case REVISION_AXBX: