From: Krzysztof Kozlowski Date: Wed, 18 May 2022 07:27:26 +0000 (+0300) Subject: ath10k: do not enforce interrupt trigger type X-Git-Tag: v5.15.73~1569 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d2d2789fb9563f768b657dd43ffd2cbce0a8fd56;p=platform%2Fkernel%2Flinux-rpi.git ath10k: do not enforce interrupt trigger type [ Upstream commit 1ee6c5abebd3cacf2ac4378d0ed4f57fd4850421 ] Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge rising - but instead rely on Devicetree to configure it. All Qualcomm DTSI with WCN3990 define the interrupt type as level high, so the mismatch between DTSI and driver causes rebind issues: $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/unbind $ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/bind [ 44.763114] irq: type mismatch, failed to map hwirq-446 for interrupt-controller@17a00000! [ 44.763130] ath10k_snoc 18800000.wifi: error -ENXIO: IRQ index 0 not found [ 44.763140] ath10k_snoc 18800000.wifi: failed to initialize resource: -6 Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.0.c8-00009-QCAHLSWSC8180XMTPLZ-1 Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 Fixes: c963a683e701 ("ath10k: add resource init and deinit for WCN3990") Signed-off-by: Krzysztof Kozlowski Tested-by: Steev Klimaszewski Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220513151516.357549-1-krzysztof.kozlowski@linaro.org Signed-off-by: Sasha Levin --- diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index f79dd9a71690..73fe77e7824b 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -1249,13 +1249,12 @@ static void ath10k_snoc_init_napi(struct ath10k *ar) static int ath10k_snoc_request_irq(struct ath10k *ar) { struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); - int irqflags = IRQF_TRIGGER_RISING; int ret, id; for (id = 0; id < CE_COUNT_MAX; id++) { ret = request_irq(ar_snoc->ce_irqs[id].irq_line, - ath10k_snoc_per_engine_handler, - irqflags, ce_name[id], ar); + ath10k_snoc_per_engine_handler, 0, + ce_name[id], ar); if (ret) { ath10k_err(ar, "failed to register IRQ handler for CE %d: %d\n",