From: James Smart Date: Mon, 10 Sep 2018 17:30:50 +0000 (-0700) Subject: scsi: lpfc: add support to retrieve firmware logs X-Git-Tag: v5.4-rc1~2267^2~189 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d2cc9bcd7fa30b6c2270c044ff6dc9e839bf779e;p=platform%2Fkernel%2Flinux-rpi.git scsi: lpfc: add support to retrieve firmware logs This patch adds the ability to read firmware logs from the adapter. The driver registers a buffer with the adapter that is then written to by the adapter. The adapter posts CQEs to indicate content updates in the buffer. While the adapter is writing to the buffer in a circular fashion, an application will poll the driver to read the next amount of log data from the buffer. Driver log buffer size is configurable via the ras_fwlog_buffsize sysfs attribute. Verbosity to be used by firmware when logging to host memory is controlled through the ras_fwlog_level attribute. The ras_fwlog_func attribute enables or disables loggy by firmware. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 6340883..4fe04c0 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -583,6 +583,25 @@ struct lpfc_mbox_ext_buf_ctx { struct list_head ext_dmabuf_list; }; +struct lpfc_ras_fwlog { + uint8_t *fwlog_buff; + uint32_t fw_buffcount; /* Buffer size posted to FW */ +#define LPFC_RAS_BUFF_ENTERIES 16 /* Each entry can hold max of 64k */ +#define LPFC_RAS_MAX_ENTRY_SIZE (64 * 1024) +#define LPFC_RAS_MIN_BUFF_POST_SIZE (256 * 1024) +#define LPFC_RAS_MAX_BUFF_POST_SIZE (1024 * 1024) + uint32_t fw_loglevel; /* Log level set */ + struct lpfc_dmabuf lwpd; + struct list_head fwlog_buff_list; + + /* RAS support status on adapter */ + bool ras_hwsupport; /* RAS Support available on HW or not */ + bool ras_enabled; /* Ras Enabled for the function */ +#define LPFC_RAS_DISABLE_LOGGING 0x00 +#define LPFC_RAS_ENABLE_LOGGING 0x01 + bool ras_active; /* RAS logging running state */ +}; + struct lpfc_hba { /* SCSI interface function jump table entries */ int (*lpfc_new_scsi_buf) @@ -834,6 +853,9 @@ struct lpfc_hba { #define LPFC_FDMI_SUPPORT 1 /* FDMI supported? */ uint32_t cfg_enable_SmartSAN; uint32_t cfg_enable_mds_diags; + uint32_t cfg_ras_fwlog_level; + uint32_t cfg_ras_fwlog_buffsize; + uint32_t cfg_ras_fwlog_func; uint32_t cfg_enable_fc4_type; uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */ uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */ @@ -1094,6 +1116,9 @@ struct lpfc_hba { struct unsol_rcv_ct_ctx ct_ctx[LPFC_CT_CTX_MAX]; uint32_t ctx_idx; + /* RAS Support */ + struct lpfc_ras_fwlog ras_fwlog; + uint8_t menlo_flag; /* menlo generic flags */ #define HBA_MENLO_SUPPORT 0x1 /* HBA supports menlo commands */ uint32_t iocb_cnt; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 18750bf..73e2296 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -5431,6 +5431,31 @@ lpfc_sg_seg_cnt_init(struct lpfc_hba *phba, int val) LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics"); /* + * lpfc_ras_fwlog_buffsize: Firmware logging host buffer size + * 0 = Disable firmware logging (default) + * [1-4] = Multiple of 1/4th Mb of host memory for FW logging + * Value range [0..4]. Default value is 0 + */ +LPFC_ATTR_RW(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging"); + +/* + * lpfc_ras_fwlog_level: Firmware logging verbosity level + * Valid only if firmware logging is enabled + * 0(Least Verbosity) 4 (most verbosity) + * Value range is [0..4]. Default value is 0 + */ +LPFC_ATTR_RW(ras_fwlog_level, 0, 0, 4, "Firmware Logging Level"); + +/* + * lpfc_ras_fwlog_func: Firmware logging enabled on function number + * Default function which has RAS support : 0 + * Value Range is [0..7]. + * FW logging is a global action and enablement is via a specific + * port. + */ +LPFC_ATTR_RW(ras_fwlog_func, 0, 0, 7, "Firmware Logging Enabled on Function"); + +/* * lpfc_enable_bbcr: Enable BB Credit Recovery * 0 = BB Credit Recovery disabled * 1 = BB Credit Recovery enabled (default) @@ -5555,6 +5580,9 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_protocol, &dev_attr_lpfc_xlane_supported, &dev_attr_lpfc_enable_mds_diags, + &dev_attr_lpfc_ras_fwlog_buffsize, + &dev_attr_lpfc_ras_fwlog_level, + &dev_attr_lpfc_ras_fwlog_func, &dev_attr_lpfc_enable_bbcr, &dev_attr_lpfc_enable_dpp, NULL, @@ -6641,6 +6669,10 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_sli_mode_init(phba, lpfc_sli_mode); phba->cfg_enable_dss = 1; lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags); + lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize); + lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level); + lpfc_ras_fwlog_func_init(phba, lpfc_ras_fwlog_func); + /* If the NVME FC4 type is enabled, scale the sg_seg_cnt to * accommodate 512K and 1M IOs in a single nvme buf and supply diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 90745fe..d53a704 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -5309,6 +5310,330 @@ job_error: } /** + * lpfc_check_fwlog_support: Check FW log support on the adapter + * @phba: Pointer to HBA context object. + * + * Check if FW Logging support by the adapter + **/ +int +lpfc_check_fwlog_support(struct lpfc_hba *phba) +{ + struct lpfc_ras_fwlog *ras_fwlog = NULL; + + ras_fwlog = &phba->ras_fwlog; + + if (ras_fwlog->ras_hwsupport == false) + return -EACCES; + else if (ras_fwlog->ras_enabled == false) + return -EPERM; + else + return 0; +} + +/** + * lpfc_bsg_get_ras_config: Get RAS configuration settings + * @job: fc_bsg_job to handle + * + * Get RAS configuration values set. + **/ +static int +lpfc_bsg_get_ras_config(struct bsg_job *job) +{ + struct Scsi_Host *shost = fc_bsg_to_shost(job); + struct lpfc_vport *vport = shost_priv(shost); + struct fc_bsg_reply *bsg_reply = job->reply; + struct lpfc_hba *phba = vport->phba; + struct lpfc_bsg_get_ras_config_reply *ras_reply; + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + int rc = 0; + + if (job->request_len < + sizeof(struct fc_bsg_request) + + sizeof(struct lpfc_bsg_ras_req)) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "6181 Received RAS_LOG request " + "below minimum size\n"); + rc = -EINVAL; + goto ras_job_error; + } + + /* Check FW log status */ + rc = lpfc_check_fwlog_support(phba); + if (rc == -EACCES || rc == -EPERM) + goto ras_job_error; + + ras_reply = (struct lpfc_bsg_get_ras_config_reply *) + bsg_reply->reply_data.vendor_reply.vendor_rsp; + + /* Current logging state */ + if (ras_fwlog->ras_active == true) + ras_reply->state = LPFC_RASLOG_STATE_RUNNING; + else + ras_reply->state = LPFC_RASLOG_STATE_STOPPED; + + ras_reply->log_level = phba->ras_fwlog.fw_loglevel; + ras_reply->log_buff_sz = phba->cfg_ras_fwlog_buffsize; + +ras_job_error: + /* make error code available to userspace */ + bsg_reply->result = rc; + + /* complete the job back to userspace */ + bsg_job_done(job, bsg_reply->result, bsg_reply->reply_payload_rcv_len); + return rc; +} + +/** + * lpfc_ras_stop_fwlog: Disable FW logging by the adapter + * @phba: Pointer to HBA context object. + * + * Disable FW logging into host memory on the adapter. To + * be done before reading logs from the host memory. + **/ +static void +lpfc_ras_stop_fwlog(struct lpfc_hba *phba) +{ + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + + ras_fwlog->ras_active = false; + + /* Disable FW logging to host memory */ + writel(LPFC_CTL_PDEV_CTL_DDL_RAS, + phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); +} + +/** + * lpfc_bsg_set_ras_config: Set FW logging parameters + * @job: fc_bsg_job to handle + * + * Set log-level parameters for FW-logging in host memory + **/ +static int +lpfc_bsg_set_ras_config(struct bsg_job *job) +{ + struct Scsi_Host *shost = fc_bsg_to_shost(job); + struct lpfc_vport *vport = shost_priv(shost); + struct lpfc_hba *phba = vport->phba; + struct lpfc_bsg_set_ras_config_req *ras_req; + struct fc_bsg_request *bsg_request = job->request; + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + struct fc_bsg_reply *bsg_reply = job->reply; + uint8_t action = 0, log_level = 0; + int rc = 0; + + if (job->request_len < + sizeof(struct fc_bsg_request) + + sizeof(struct lpfc_bsg_set_ras_config_req)) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "6182 Received RAS_LOG request " + "below minimum size\n"); + rc = -EINVAL; + goto ras_job_error; + } + + /* Check FW log status */ + rc = lpfc_check_fwlog_support(phba); + if (rc == -EACCES || rc == -EPERM) + goto ras_job_error; + + ras_req = (struct lpfc_bsg_set_ras_config_req *) + bsg_request->rqst_data.h_vendor.vendor_cmd; + action = ras_req->action; + log_level = ras_req->log_level; + + if (action == LPFC_RASACTION_STOP_LOGGING) { + /* Check if already disabled */ + if (ras_fwlog->ras_active == false) { + rc = -ESRCH; + goto ras_job_error; + } + + /* Disable logging */ + lpfc_ras_stop_fwlog(phba); + } else { + /*action = LPFC_RASACTION_START_LOGGING*/ + if (ras_fwlog->ras_active == true) { + rc = -EINPROGRESS; + goto ras_job_error; + } + + /* Enable logging */ + rc = lpfc_sli4_ras_fwlog_init(phba, log_level, + LPFC_RAS_ENABLE_LOGGING); + if (rc) + rc = -EINVAL; + } +ras_job_error: + /* make error code available to userspace */ + bsg_reply->result = rc; + + /* complete the job back to userspace */ + bsg_job_done(job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); + + return rc; +} + +/** + * lpfc_bsg_get_ras_lwpd: Get log write position data + * @job: fc_bsg_job to handle + * + * Get Offset/Wrap count of the log message written + * in host memory + **/ +static int +lpfc_bsg_get_ras_lwpd(struct bsg_job *job) +{ + struct Scsi_Host *shost = fc_bsg_to_shost(job); + struct lpfc_vport *vport = shost_priv(shost); + struct lpfc_bsg_get_ras_lwpd *ras_reply; + struct lpfc_hba *phba = vport->phba; + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + struct fc_bsg_reply *bsg_reply = job->reply; + uint32_t lwpd_offset = 0; + uint64_t wrap_value = 0; + int rc = 0; + + rc = lpfc_check_fwlog_support(phba); + if (rc == -EACCES || rc == -EPERM) + goto ras_job_error; + + if (job->request_len < + sizeof(struct fc_bsg_request) + + sizeof(struct lpfc_bsg_ras_req)) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "6183 Received RAS_LOG request " + "below minimum size\n"); + rc = -EINVAL; + goto ras_job_error; + } + + ras_reply = (struct lpfc_bsg_get_ras_lwpd *) + bsg_reply->reply_data.vendor_reply.vendor_rsp; + + lwpd_offset = *((uint32_t *)ras_fwlog->lwpd.virt) & 0xffffffff; + ras_reply->offset = be32_to_cpu(lwpd_offset); + + wrap_value = *((uint64_t *)ras_fwlog->lwpd.virt); + ras_reply->wrap_count = be32_to_cpu((wrap_value >> 32) & 0xffffffff); + +ras_job_error: + /* make error code available to userspace */ + bsg_reply->result = rc; + + /* complete the job back to userspace */ + bsg_job_done(job, bsg_reply->result, bsg_reply->reply_payload_rcv_len); + + return rc; +} + +/** + * lpfc_bsg_get_ras_fwlog: Read FW log + * @job: fc_bsg_job to handle + * + * Copy the FW log into the passed buffer. + **/ +static int +lpfc_bsg_get_ras_fwlog(struct bsg_job *job) +{ + struct Scsi_Host *shost = fc_bsg_to_shost(job); + struct lpfc_vport *vport = shost_priv(shost); + struct lpfc_hba *phba = vport->phba; + struct fc_bsg_request *bsg_request = job->request; + struct fc_bsg_reply *bsg_reply = job->reply; + struct lpfc_bsg_get_fwlog_req *ras_req; + uint32_t rd_offset, rd_index, offset, pending_wlen; + uint32_t boundary = 0, align_len = 0, write_len = 0; + void *dest, *src, *fwlog_buff; + struct lpfc_ras_fwlog *ras_fwlog = NULL; + struct lpfc_dmabuf *dmabuf, *next; + int rc = 0; + + ras_fwlog = &phba->ras_fwlog; + + rc = lpfc_check_fwlog_support(phba); + if (rc == -EACCES || rc == -EPERM) + goto ras_job_error; + + /* Logging to be stopped before reading */ + if (ras_fwlog->ras_active == true) { + rc = -EINPROGRESS; + goto ras_job_error; + } + + if (job->request_len < + sizeof(struct fc_bsg_request) + + sizeof(struct lpfc_bsg_get_fwlog_req)) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "6184 Received RAS_LOG request " + "below minimum size\n"); + rc = -EINVAL; + goto ras_job_error; + } + + ras_req = (struct lpfc_bsg_get_fwlog_req *) + bsg_request->rqst_data.h_vendor.vendor_cmd; + rd_offset = ras_req->read_offset; + + /* Allocate memory to read fw log*/ + fwlog_buff = vmalloc(ras_req->read_size); + if (!fwlog_buff) { + rc = -ENOMEM; + goto ras_job_error; + } + + rd_index = (rd_offset / LPFC_RAS_MAX_ENTRY_SIZE); + offset = (rd_offset % LPFC_RAS_MAX_ENTRY_SIZE); + pending_wlen = ras_req->read_size; + dest = fwlog_buff; + + list_for_each_entry_safe(dmabuf, next, + &ras_fwlog->fwlog_buff_list, list) { + + if (dmabuf->buffer_tag < rd_index) + continue; + + /* Align read to buffer size */ + if (offset) { + boundary = ((dmabuf->buffer_tag + 1) * + LPFC_RAS_MAX_ENTRY_SIZE); + + align_len = (boundary - offset); + write_len = min_t(u32, align_len, + LPFC_RAS_MAX_ENTRY_SIZE); + } else { + write_len = min_t(u32, pending_wlen, + LPFC_RAS_MAX_ENTRY_SIZE); + align_len = 0; + boundary = 0; + } + src = dmabuf->virt + offset; + memcpy(dest, src, write_len); + + pending_wlen -= write_len; + if (!pending_wlen) + break; + + dest += write_len; + offset = (offset + write_len) % LPFC_RAS_MAX_ENTRY_SIZE; + } + + bsg_reply->reply_payload_rcv_len = + sg_copy_from_buffer(job->reply_payload.sg_list, + job->reply_payload.sg_cnt, + fwlog_buff, ras_req->read_size); + + vfree(fwlog_buff); + +ras_job_error: + bsg_reply->result = rc; + bsg_job_done(job, bsg_reply->result, bsg_reply->reply_payload_rcv_len); + + return rc; +} + + +/** * lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job * @job: fc_bsg_job to handle **/ @@ -5355,6 +5680,18 @@ lpfc_bsg_hst_vendor(struct bsg_job *job) case LPFC_BSG_VENDOR_FORCED_LINK_SPEED: rc = lpfc_forced_link_speed(job); break; + case LPFC_BSG_VENDOR_RAS_GET_LWPD: + rc = lpfc_bsg_get_ras_lwpd(job); + break; + case LPFC_BSG_VENDOR_RAS_GET_FWLOG: + rc = lpfc_bsg_get_ras_fwlog(job); + break; + case LPFC_BSG_VENDOR_RAS_GET_CONFIG: + rc = lpfc_bsg_get_ras_config(job); + break; + case LPFC_BSG_VENDOR_RAS_SET_CONFIG: + rc = lpfc_bsg_set_ras_config(job); + break; default: rc = -EINVAL; bsg_reply->reply_payload_rcv_len = 0; @@ -5368,7 +5705,7 @@ lpfc_bsg_hst_vendor(struct bsg_job *job) /** * lpfc_bsg_request - handle a bsg request from the FC transport - * @job: fc_bsg_job to handle + * @job: bsg_job to handle **/ int lpfc_bsg_request(struct bsg_job *job) @@ -5402,7 +5739,7 @@ lpfc_bsg_request(struct bsg_job *job) /** * lpfc_bsg_timeout - handle timeout of a bsg request from the FC transport - * @job: fc_bsg_job that has timed out + * @job: bsg_job that has timed out * * This function just aborts the job's IOCB. The aborted IOCB will return to * the waiting function which will handle passing the error back to userspace diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index 32347c8..820323f 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -38,6 +38,10 @@ #define LPFC_BSG_VENDOR_DIAG_MODE_END 10 #define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 #define LPFC_BSG_VENDOR_FORCED_LINK_SPEED 14 +#define LPFC_BSG_VENDOR_RAS_GET_LWPD 16 +#define LPFC_BSG_VENDOR_RAS_GET_FWLOG 17 +#define LPFC_BSG_VENDOR_RAS_GET_CONFIG 18 +#define LPFC_BSG_VENDOR_RAS_SET_CONFIG 19 struct set_ct_event { uint32_t command; @@ -296,6 +300,38 @@ struct forced_link_speed_support_reply { uint8_t supported; }; +struct lpfc_bsg_ras_req { + uint32_t command; +}; + +struct lpfc_bsg_get_fwlog_req { + uint32_t command; + uint32_t read_size; + uint32_t read_offset; +}; + +struct lpfc_bsg_get_ras_lwpd { + uint32_t offset; + uint32_t wrap_count; +}; + +struct lpfc_bsg_set_ras_config_req { + uint32_t command; + uint8_t action; +#define LPFC_RASACTION_STOP_LOGGING 0x00 +#define LPFC_RASACTION_START_LOGGING 0x01 + uint8_t log_level; +}; + +struct lpfc_bsg_get_ras_config_reply { + uint8_t state; +#define LPFC_RASLOG_STATE_STOPPED 0x00 +#define LPFC_RASLOG_STATE_RUNNING 0x01 + uint8_t log_level; + uint32_t log_buff_sz; +}; + + /* driver only */ #define SLI_CONFIG_NOT_HANDLED 0 #define SLI_CONFIG_HANDLED 1 diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index bea24bc..e011365 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -545,6 +545,13 @@ bool lpfc_find_next_oas_lun(struct lpfc_hba *, struct lpfc_name *, int lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox); void lpfc_mbx_cmpl_rdp_page_a0(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb); +/* RAS Interface */ +void lpfc_sli4_ras_init(struct lpfc_hba *phba); +void lpfc_sli4_ras_setup(struct lpfc_hba *phba); +int lpfc_sli4_ras_fwlog_init(struct lpfc_hba *phba, uint32_t fwlog_level, + uint32_t fwlog_enable); +int lpfc_check_fwlog_support(struct lpfc_hba *phba); + /* NVME interfaces. */ void lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 083f8c8..bbd0a57 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -186,6 +186,7 @@ struct lpfc_sli_intf { #define LPFC_CTL_PDEV_CTL_FRL_ALL 0x00 #define LPFC_CTL_PDEV_CTL_FRL_FC_FCOE 0x10 #define LPFC_CTL_PDEV_CTL_FRL_NIC 0x20 +#define LPFC_CTL_PDEV_CTL_DDL_RAS 0x1000000 #define LPFC_FW_DUMP_REQUEST (LPFC_CTL_PDEV_CTL_DD | LPFC_CTL_PDEV_CTL_FRST) @@ -964,6 +965,7 @@ struct mbox_header { /* Subsystem Definitions */ #define LPFC_MBOX_SUBSYSTEM_NA 0x0 #define LPFC_MBOX_SUBSYSTEM_COMMON 0x1 +#define LPFC_MBOX_SUBSYSTEM_LOWLEVEL 0xB #define LPFC_MBOX_SUBSYSTEM_FCOE 0xC /* Device Specific Definitions */ @@ -1030,6 +1032,9 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE 0x22 #define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK 0x23 +/* Low level Opcodes */ +#define LPFC_MBOX_OPCODE_SET_DIAG_LOG_OPTION 0x37 + /* Mailbox command structures */ struct eq_context { uint32_t word0; @@ -1162,6 +1167,45 @@ struct lpfc_mbx_nop { uint32_t context[2]; }; + + +struct lpfc_mbx_set_ras_fwlog { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_fwlog_enable_SHIFT 0 +#define lpfc_fwlog_enable_MASK 0x00000001 +#define lpfc_fwlog_enable_WORD word4 +#define lpfc_fwlog_loglvl_SHIFT 8 +#define lpfc_fwlog_loglvl_MASK 0x0000000F +#define lpfc_fwlog_loglvl_WORD word4 +#define lpfc_fwlog_ra_SHIFT 15 +#define lpfc_fwlog_ra_WORD 0x00000008 +#define lpfc_fwlog_buffcnt_SHIFT 16 +#define lpfc_fwlog_buffcnt_MASK 0x000000FF +#define lpfc_fwlog_buffcnt_WORD word4 +#define lpfc_fwlog_buffsz_SHIFT 24 +#define lpfc_fwlog_buffsz_MASK 0x000000FF +#define lpfc_fwlog_buffsz_WORD word4 + uint32_t word5; +#define lpfc_fwlog_acqe_SHIFT 0 +#define lpfc_fwlog_acqe_MASK 0x0000FFFF +#define lpfc_fwlog_acqe_WORD word5 +#define lpfc_fwlog_cqid_SHIFT 16 +#define lpfc_fwlog_cqid_MASK 0x0000FFFF +#define lpfc_fwlog_cqid_WORD word5 +#define LPFC_MAX_FWLOG_PAGE 16 + struct dma_address lwpd; + struct dma_address buff_fwlog[LPFC_MAX_FWLOG_PAGE]; + } request; + struct { + uint32_t word0; + } response; + } u; +}; + + struct cq_context { uint32_t word0; #define lpfc_cq_context_event_SHIFT 31 @@ -3868,6 +3912,7 @@ struct lpfc_mqe { struct lpfc_mbx_memory_dump_type3 mem_dump_type3; struct lpfc_mbx_set_host_data set_host_data; struct lpfc_mbx_nop nop; + struct lpfc_mbx_set_ras_fwlog ras_fwlog; } un; }; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index bb2bff7..054072c 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -6228,6 +6228,9 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) if (phba->cfg_fof) fof_vectors = 1; + /* Verify RAS support on adapter */ + lpfc_sli4_ras_init(phba); + /* Verify all the SLI4 queues */ rc = lpfc_sli4_queue_verify(phba); if (rc) @@ -10515,6 +10518,14 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) /* Stop kthread signal shall trigger work_done one more time */ kthread_stop(phba->worker_thread); + /* Disable FW logging to host memory */ + writel(LPFC_CTL_PDEV_CTL_DDL_RAS, + phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); + + /* Free RAS DMA memory */ + if (phba->ras_fwlog.ras_enabled == true) + lpfc_sli4_ras_dma_free(phba); + /* Unset the queues shared with the hardware then release all * allocated resources. */ @@ -10760,6 +10771,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) phba->mds_diags_support = 1; else phba->mds_diags_support = 0; + return 0; } @@ -11721,6 +11733,10 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) /* Check if there are static vports to be created. */ lpfc_create_static_vport(phba); + + /* Enable RAS FW log support */ + lpfc_sli4_ras_setup(phba); + return 0; out_disable_intr: @@ -12451,6 +12467,30 @@ lpfc_sli4_oas_verify(struct lpfc_hba *phba) } /** + * lpfc_sli4_ras_init - Verify RAS-FW log is supported by this adapter + * @phba: pointer to lpfc hba data structure. + * + * This routine checks to see if RAS is supported by the adapter. Check the + * function through which RAS support enablement is to be done. + **/ +void +lpfc_sli4_ras_init(struct lpfc_hba *phba) +{ + switch (phba->pcidev->device) { + case PCI_DEVICE_ID_LANCER_G6_FC: + case PCI_DEVICE_ID_LANCER_G7_FC: + phba->ras_fwlog.ras_hwsupport = true; + if (phba->cfg_ras_fwlog_func == PCI_FUNC(phba->pcidev->devfn)) + phba->ras_fwlog.ras_enabled = true; + else + phba->ras_fwlog.ras_enabled = false; + break; + default: + phba->ras_fwlog.ras_hwsupport = false; + } +} + +/** * lpfc_fof_queue_setup - Set up all the fof queues * @phba: pointer to lpfc hba data structure. * diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 99fddd0..c378230 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -6149,6 +6149,271 @@ lpfc_set_features(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox, } /** + * lpfc_sli4_ras_dma_free - Free memory allocated for FW logging. + * @phba: Pointer to HBA context object. + * + * This function is called to free memory allocated for RAS FW logging + * support in the driver. + **/ +void +lpfc_sli4_ras_dma_free(struct lpfc_hba *phba) +{ + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + struct lpfc_dmabuf *dmabuf, *next; + + if (!list_empty(&ras_fwlog->fwlog_buff_list)) { + list_for_each_entry_safe(dmabuf, next, + &ras_fwlog->fwlog_buff_list, + list) { + list_del(&dmabuf->list); + dma_free_coherent(&phba->pcidev->dev, + LPFC_RAS_MAX_ENTRY_SIZE, + dmabuf->virt, dmabuf->phys); + kfree(dmabuf); + } + } + + if (ras_fwlog->lwpd.virt) { + dma_free_coherent(&phba->pcidev->dev, + sizeof(uint32_t) * 2, + ras_fwlog->lwpd.virt, + ras_fwlog->lwpd.phys); + ras_fwlog->lwpd.virt = NULL; + } + + ras_fwlog->ras_active = false; +} + +/** + * lpfc_sli4_ras_dma_alloc: Allocate memory for FW support + * @phba: Pointer to HBA context object. + * @fwlog_buff_count: Count of buffers to be created. + * + * This routine DMA memory for Log Write Position Data[LPWD] and buffer + * to update FW log is posted to the adapter. + * Buffer count is calculated based on module param ras_fwlog_buffsize + * Size of each buffer posted to FW is 64K. + **/ + +static int +lpfc_sli4_ras_dma_alloc(struct lpfc_hba *phba, + uint32_t fwlog_buff_count) +{ + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + struct lpfc_dmabuf *dmabuf; + int rc = 0, i = 0; + + /* Initialize List */ + INIT_LIST_HEAD(&ras_fwlog->fwlog_buff_list); + + /* Allocate memory for the LWPD */ + ras_fwlog->lwpd.virt = dma_alloc_coherent(&phba->pcidev->dev, + sizeof(uint32_t) * 2, + &ras_fwlog->lwpd.phys, + GFP_KERNEL); + if (!ras_fwlog->lwpd.virt) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "6185 LWPD Memory Alloc Failed\n"); + + return -ENOMEM; + } + + ras_fwlog->fw_buffcount = fwlog_buff_count; + for (i = 0; i < ras_fwlog->fw_buffcount; i++) { + dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), + GFP_KERNEL); + if (!dmabuf) { + rc = -ENOMEM; + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "6186 Memory Alloc failed FW logging"); + goto free_mem; + } + + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, + LPFC_RAS_MAX_ENTRY_SIZE, + &dmabuf->phys, + GFP_KERNEL); + if (!dmabuf->virt) { + kfree(dmabuf); + rc = -ENOMEM; + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "6187 DMA Alloc Failed FW logging"); + goto free_mem; + } + memset(dmabuf->virt, 0, LPFC_RAS_MAX_ENTRY_SIZE); + dmabuf->buffer_tag = i; + list_add_tail(&dmabuf->list, &ras_fwlog->fwlog_buff_list); + } + +free_mem: + if (rc) + lpfc_sli4_ras_dma_free(phba); + + return rc; +} + +/** + * lpfc_sli4_ras_mbox_cmpl: Completion handler for RAS MBX command + * @phba: pointer to lpfc hba data structure. + * @pmboxq: pointer to the driver internal queue element for mailbox command. + * + * Completion handler for driver's RAS MBX command to the device. + **/ +static void +lpfc_sli4_ras_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) +{ + MAILBOX_t *mb; + union lpfc_sli4_cfg_shdr *shdr; + uint32_t shdr_status, shdr_add_status; + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + + mb = &pmb->u.mb; + + shdr = (union lpfc_sli4_cfg_shdr *) + &pmb->u.mqe.un.ras_fwlog.header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + + if (mb->mbxStatus != MBX_SUCCESS || shdr_status) { + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, + "6188 FW LOG mailbox " + "completed with status x%x add_status x%x," + " mbx status x%x\n", + shdr_status, shdr_add_status, mb->mbxStatus); + goto disable_ras; + } + + ras_fwlog->ras_active = true; + mempool_free(pmb, phba->mbox_mem_pool); + + return; + +disable_ras: + /* Free RAS DMA memory */ + lpfc_sli4_ras_dma_free(phba); + mempool_free(pmb, phba->mbox_mem_pool); +} + +/** + * lpfc_sli4_ras_fwlog_init: Initialize memory and post RAS MBX command + * @phba: pointer to lpfc hba data structure. + * @fwlog_level: Logging verbosity level. + * @fwlog_enable: Enable/Disable logging. + * + * Initialize memory and post mailbox command to enable FW logging in host + * memory. + **/ +int +lpfc_sli4_ras_fwlog_init(struct lpfc_hba *phba, + uint32_t fwlog_level, + uint32_t fwlog_enable) +{ + struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog; + struct lpfc_mbx_set_ras_fwlog *mbx_fwlog = NULL; + struct lpfc_dmabuf *dmabuf; + LPFC_MBOXQ_t *mbox; + uint32_t len = 0, fwlog_buffsize, fwlog_entry_count; + int rc = 0; + + fwlog_buffsize = (LPFC_RAS_MIN_BUFF_POST_SIZE * + phba->cfg_ras_fwlog_buffsize); + fwlog_entry_count = (fwlog_buffsize/LPFC_RAS_MAX_ENTRY_SIZE); + + /* + * If re-enabling FW logging support use earlier allocated + * DMA buffers while posting MBX command. + **/ + if (!ras_fwlog->lwpd.virt) { + rc = lpfc_sli4_ras_dma_alloc(phba, fwlog_entry_count); + if (rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "6189 RAS FW Log Support Not Enabled"); + return rc; + } + } + + /* Setup Mailbox command */ + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "6190 RAS MBX Alloc Failed"); + rc = -ENOMEM; + goto mem_free; + } + + ras_fwlog->fw_loglevel = fwlog_level; + len = (sizeof(struct lpfc_mbx_set_ras_fwlog) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_LOWLEVEL, + LPFC_MBOX_OPCODE_SET_DIAG_LOG_OPTION, + len, LPFC_SLI4_MBX_EMBED); + + mbx_fwlog = (struct lpfc_mbx_set_ras_fwlog *)&mbox->u.mqe.un.ras_fwlog; + bf_set(lpfc_fwlog_enable, &mbx_fwlog->u.request, + fwlog_enable); + bf_set(lpfc_fwlog_loglvl, &mbx_fwlog->u.request, + ras_fwlog->fw_loglevel); + bf_set(lpfc_fwlog_buffcnt, &mbx_fwlog->u.request, + ras_fwlog->fw_buffcount); + bf_set(lpfc_fwlog_buffsz, &mbx_fwlog->u.request, + LPFC_RAS_MAX_ENTRY_SIZE/SLI4_PAGE_SIZE); + + /* Update DMA buffer address */ + list_for_each_entry(dmabuf, &ras_fwlog->fwlog_buff_list, list) { + memset(dmabuf->virt, 0, LPFC_RAS_MAX_ENTRY_SIZE); + + mbx_fwlog->u.request.buff_fwlog[dmabuf->buffer_tag].addr_lo = + putPaddrLow(dmabuf->phys); + + mbx_fwlog->u.request.buff_fwlog[dmabuf->buffer_tag].addr_hi = + putPaddrHigh(dmabuf->phys); + } + + /* Update LPWD address */ + mbx_fwlog->u.request.lwpd.addr_lo = putPaddrLow(ras_fwlog->lwpd.phys); + mbx_fwlog->u.request.lwpd.addr_hi = putPaddrHigh(ras_fwlog->lwpd.phys); + + mbox->vport = phba->pport; + mbox->mbox_cmpl = lpfc_sli4_ras_mbox_cmpl; + + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + + if (rc == MBX_NOT_FINISHED) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "6191 RAS Mailbox failed. " + "status %d mbxStatus : x%x", rc, + bf_get(lpfc_mqe_status, &mbox->u.mqe)); + mempool_free(mbox, phba->mbox_mem_pool); + rc = -EIO; + goto mem_free; + } else + rc = 0; +mem_free: + if (rc) + lpfc_sli4_ras_dma_free(phba); + + return rc; +} + +/** + * lpfc_sli4_ras_setup - Check if RAS supported on the adapter + * @phba: Pointer to HBA context object. + * + * Check if RAS is supported on the adapter and initialize it. + **/ +void +lpfc_sli4_ras_setup(struct lpfc_hba *phba) +{ + /* Check RAS FW Log needs to be enabled or not */ + if (lpfc_check_fwlog_support(phba)) + return; + + lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level, + LPFC_RAS_ENABLE_LOGGING); +} + +/** * lpfc_sli4_alloc_resource_identifiers - Allocate all SLI4 resource extents. * @phba: Pointer to HBA context object. * diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 399c001..e76c380 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -886,3 +886,4 @@ int lpfc_sli4_unregister_fcf(struct lpfc_hba *); int lpfc_sli4_post_status_check(struct lpfc_hba *); uint8_t lpfc_sli_config_mbox_subsys_get(struct lpfc_hba *, LPFC_MBOXQ_t *); uint8_t lpfc_sli_config_mbox_opcode_get(struct lpfc_hba *, LPFC_MBOXQ_t *); +void lpfc_sli4_ras_dma_free(struct lpfc_hba *phba);