From: Johan Jonker Date: Fri, 25 Jun 2021 13:26:33 +0000 (+0200) Subject: ARM: dts: rockchip: update rk3188-radxarock.dts X-Git-Tag: v2021.10~54^2~16 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d2a74ec91b6bcf1b83d9a437c63d6b56b166c85b;p=platform%2Fkernel%2Fu-boot.git ARM: dts: rockchip: update rk3188-radxarock.dts In the Linux DT the file rk3xxx.dtsi is shared between rk3066 and rk3188. Both rk3xxx.dtsi and rk3188.dtsi have recently had some updates. For a future rk3066 support in U-boot this file must also update. Move U-boot specific things in a rk3188-radxarock-u-boot.dtsi file. Signed-off-by: Johan Jonker Reviewed-by: Kever Yang --- diff --git a/arch/arm/dts/rk3188-radxarock-u-boot.dtsi b/arch/arm/dts/rk3188-radxarock-u-boot.dtsi index 204bb3a..9c9016d 100644 --- a/arch/arm/dts/rk3188-radxarock-u-boot.dtsi +++ b/arch/arm/dts/rk3188-radxarock-u-boot.dtsi @@ -5,36 +5,58 @@ #include "rk3188-u-boot.dtsi" +/ { + chosen { +/* stdout-path = &uart2; */ + stdout-path = "serial2:115200n8"; + }; + + config { + u-boot,boot-led = "rock:red:power"; + u-boot,dm-pre-reloc; + }; +}; + &cru { u-boot,dm-spl; }; -&pinctrl { - u-boot,dm-spl; +&dmc { + rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6 + 0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4 + 0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0 + 0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0 + 0x4 0x0>; + rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00 + 0x220 0x40 0x0 0x0>; + rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>; }; -&mmc0 { +&emmc { fifo-mode; max-frequency = <16000000>; }; -&mmc1 { +&mmc0 { fifo-mode; max-frequency = <16000000>; }; -&emmc { +&mmc1 { fifo-mode; max-frequency = <16000000>; }; -&uart2 { - status = "okay"; +&pinctrl { u-boot,dm-spl; }; &timer3 { compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer"; - u-boot,dm-spl; clock-frequency = <24000000>; + u-boot,dm-spl; +}; + +&uart2 { + u-boot,dm-spl; }; diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts index 10527a0..e7138a4 100644 --- a/arch/arm/dts/rk3188-radxarock.dts +++ b/arch/arm/dts/rk3188-radxarock.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 Heiko Stuebner */ @@ -16,17 +16,7 @@ mmc0 = &mmc0; }; - chosen { -/* stdout-path = &uart2; */ - stdout-path = "serial2:115200n8"; - }; - - config { - u-boot,dm-pre-reloc; - u-boot,boot-led = "rock:red:power"; - }; - - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; @@ -36,7 +26,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = ; label = "GPIO Key Power"; linux,input-type = <1>; @@ -48,21 +38,21 @@ gpio-leds { compatible = "gpio-leds"; - green { + green_led: led-0 { label = "rock:green:user1"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; - blue { + blue_led: led-1 { label = "rock:blue:user2"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; - sleep { + sleep_led: led-2 { label = "rock:red:power"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -84,7 +74,7 @@ ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 10 1>; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_recv_pin>; }; @@ -92,7 +82,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; @@ -107,7 +97,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; startup-delay-us = <100000>; @@ -117,7 +107,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; @@ -136,17 +126,6 @@ }; }; -&dmc { - rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6 - 0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4 - 0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0 - 0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0 - 0x4 0x0>; - rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00 - 0x220 0x40 0x0 0x0>; - rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>; -}; - &emac { status = "okay"; @@ -159,12 +138,28 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio3>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = ; }; }; &cpu0 { - cpu0-supply = <&vdd_arm>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&gpu { + status = "okay"; }; &i2c1 { @@ -175,7 +170,7 @@ compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; #clock-cells = <0>; @@ -287,7 +282,6 @@ }; &mmc0 { - num-slots = <1>; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; @@ -318,40 +312,40 @@ act8846 { act8846_dvs0_ctl: act8846-dvs0-ctl { - rockchip,pins = ; + rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; }; }; hym8563 { rtc_int: rtc-int { - rockchip,pins = ; + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lan8720a { phy_int: phy-int { - rockchip,pins = ; + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; ir-receiver { ir_recv_pin: ir-recv-pin { - rockchip,pins = ; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sd0 { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = ; + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; @@ -368,6 +362,10 @@ status = "okay"; }; +&uart2 { + status = "okay"; +}; + &uart3 { status = "okay"; };