From: Nícolas F. R. A. Prado Date: Tue, 3 Oct 2023 11:13:47 +0000 (+0200) Subject: arm64: dts: mediatek: mt8195: Set DSU PMU status to fail X-Git-Tag: v6.6.7~1749^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=d192615c307ec9f74cd0582880ece698533eb99b;p=platform%2Fkernel%2Flinux-starfive.git arm64: dts: mediatek: mt8195: Set DSU PMU status to fail The DSU PMU allows monitoring performance events in the DSU cluster, which is done by configuring and reading back values from the DSU PMU system registers. However, for write-access to be allowed by ELs lower than EL3, the EL3 firmware needs to update the setting on the ACTLR3_EL3 register, as it is disallowed by default. That configuration is not done on the firmware used by the MT8195 SoC, as a consequence, booting a MT8195-based machine like mt8195-cherry-tomato-r2 with CONFIG_ARM_DSU_PMU enabled hangs the kernel just as it writes to the CLUSTERPMOVSCLR_EL1 register, since the instruction faults to EL3, and BL31 apparently just re-runs the instruction over and over. Mark the DSU PMU node in the Devicetree with status "fail", as the machine doesn't have a suitable firmware to make use of it from the kernel, and allowing its driver to probe would hang the kernel. Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board") Signed-off-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20230720200753.322133-1-nfraprado@collabora.com Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-5-dad7cd62a8ff@collabora.com Signed-off-by: Arnd Bergmann --- diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 4dbbf8f..43011bc 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -313,6 +313,7 @@ interrupts = ; cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + status = "fail"; }; dmic_codec: dmic-codec {