From: Alison Wang Date: Mon, 27 May 2013 22:55:41 +0000 (+0000) Subject: arm: vf610: Add IOMUX support for Vybrid VF610 X-Git-Tag: v2013.07-rc1~2^2~5^2~17 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=cfd701b5f3eefc98cf699143d34e8a8b737b90a5;p=kernel%2Fu-boot.git arm: vf610: Add IOMUX support for Vybrid VF610 This patch adds the IOMUX support for Vybrid VF610 platform. There is a little difference for IOMUXC module between VF610 and i.MX platform, the muxmode and pad configuration share one 32bit register on VF610, but they are two independent registers on I.MX platform. A CONFIG_IOMUX_SHARE_CONFIG_REG was introduced to fit this difference. Signed-off-by: Alison Wang Acked-by: Stefano Babic Reviewed-by: Benoît Thébaudeau --- diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index 8bba8a5..9492326 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libimx-common.o -ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6)) +ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 vf610)) COBJS-y = iomux-v3.o endif ifeq ($(SOC),$(filter $(SOC),mx5 mx6)) diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index 7fe5ce7..35880c7 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -48,8 +48,14 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) if (sel_input_ofs) __raw_writel(sel_input, base + sel_input_ofs); +#ifdef CONFIG_IOMUX_SHARE_CONF_REG + if (!(pad_ctrl & NO_PAD_CTRL)) + __raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl, + base + pad_ctrl_ofs); +#else if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) __raw_writel(pad_ctrl, base + pad_ctrl_ofs); +#endif } void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 0b4e763..ebf54cf 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -121,6 +121,24 @@ typedef u64 iomux_v3_cfg_t; #define PAD_CTL_DSE_40ohm (6 << 3) #define PAD_CTL_DSE_34ohm (7 << 3) +#elif defined(CONFIG_VF610) + +#define PAD_MUX_MODE_SHIFT 20 + +#define PAD_CTL_SPEED_MED (1 << 12) +#define PAD_CTL_SPEED_HIGH (3 << 12) + +#define PAD_CTL_DSE_50ohm (3 << 6) +#define PAD_CTL_DSE_25ohm (6 << 6) +#define PAD_CTL_DSE_20ohm (7 << 6) + +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PKE (1 << 3) +#define PAD_CTL_PUE (1 << 2 | PAD_CTL_PKE) + +#define PAD_CTL_OBE_IBE_ENABLE (3 << 0) + #else #define PAD_CTL_DVS (1 << 13)