From: Trent Piepho Date: Wed, 7 Mar 2007 21:19:48 +0000 (-0300) Subject: V4L/DVB (5391): Saa7134: Clean up printk()s X-Git-Tag: v2.6.22-rc1~1118^2~123 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=cf3c34c87f921c5c63d47285c9860345cdaf5170;p=profile%2Fivi%2Fkernel-adaptation-intel-automotive.git V4L/DVB (5391): Saa7134: Clean up printk()s Change some debug messages from printk() to dprintk(). Add KERN_WARNING and KERN_ERR level indicators to other printk()s that lacked them. Format printk lines with consistent ("%s/dvb: ", dev->name) prefix. Fixed dprintk macro, which had an if with no else that wasn't protected with a do {} while(0) block. That leads to "if(...) dprintk(); else" not doing what one would expect. Signed-off-by: Trent Piepho Acked-by: Hartmut Hackmann Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 3887f04c..aa17873 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -60,8 +60,12 @@ static int debug = 0; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off)."); -#define dprintk(fmt, arg...) if (debug) \ - printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg) +#define dprintk(fmt, arg...) do { if (debug) \ + printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0) + +/* Print a warning */ +#define wprintk(fmt, arg...) \ + printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg) /* ------------------------------------------------------------------ * mt352 based DVB-T cards @@ -87,8 +91,7 @@ static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); udelay(10); ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); - printk("%s: %s %s\n", dev->name, __FUNCTION__, - ok ? "on" : "off"); + dprintk("%s %s\n", __FUNCTION__, ok ? "on" : "off"); if (!ok) saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); @@ -108,7 +111,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; struct saa7134_dev *dev= fe->dvb->priv; - printk("%s: %s called\n",dev->name,__FUNCTION__); + dprintk("%s called\n", __FUNCTION__); mt352_write(fe, clock_config, sizeof(clock_config)); udelay(200); @@ -292,7 +295,8 @@ static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_ if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { - printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1); + wprintk("could not write to tuner at addr: 0x%02x\n", + addr << 1); return -EIO; } msleep(1); @@ -562,7 +566,8 @@ static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_ if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { - printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1); + wprintk("could not write to tuner at addr: 0x%02x\n", + addr << 1); return -EIO; } return 0; @@ -609,7 +614,8 @@ static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high) saa7134_set_gpio(dev, 22, 0); GP00_LEV[1] = high ? 0 : 1; if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { - printk("%s/dvb: could not access tda8290 at addr: 0x%02x\n",dev->name, addr << 1); + wprintk("could not access tda8290 at addr: 0x%02x\n", + addr << 1); return; } msg.buf = GP00_LEV; @@ -637,7 +643,8 @@ static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) tda8290_msg.buf = tda8290_open; } if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { - printk("saa7134/dvb: could not access tda8290 I2C gate\n"); + struct saa7134_dev *dev = fe->dvb->priv; + wprintk("could not access tda8290 I2C gate\n"); return -EIO; } msleep(20); @@ -694,7 +701,7 @@ static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; if (dvb_attach(tda827x_attach, dev->dvb.frontend, tda_conf->tuner_address, &dev->i2c_adap,&tda827x_cfg) == NULL) { - printk ("saa7134/dvb: no tda827x tuner found at addr: %02x\n", + wprintk("no tda827x tuner found at addr: %02x\n", tda_conf->tuner_address); } } @@ -942,7 +949,7 @@ static int dvb_init(struct saa7134_dev *dev) switch (dev->board) { case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: - printk("%s: pinnacle 300i dvb setup\n",dev->name); + dprintk("pinnacle 300i dvb setup\n"); dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, &dev->i2c_adap); if (dev->dvb.frontend) { @@ -951,7 +958,7 @@ static int dvb_init(struct saa7134_dev *dev) break; case SAA7134_BOARD_AVERMEDIA_777: case SAA7134_BOARD_AVERMEDIA_A16AR: - printk("%s: avertv 777 dvb setup\n",dev->name); + dprintk("avertv 777 dvb setup\n"); dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, &dev->i2c_adap); if (dev->dvb.frontend) { @@ -1026,11 +1033,11 @@ static int dvb_init(struct saa7134_dev *dev) if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, &dev->i2c_adap, 0) == NULL) { - printk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__); + wprintk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__); } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - printk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__); + wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__); } } } @@ -1044,7 +1051,7 @@ static int dvb_init(struct saa7134_dev *dev) if (dvb_attach(tda827x_attach,dev->dvb.frontend, ads_tech_duo_config.tuner_address, &dev->i2c_adap,&ads_duo_cfg) == NULL) { - printk ("saa7134/dvb: no tda827x tuner found at addr: %02x\n", + wprintk("no tda827x tuner found at addr: %02x\n", ads_tech_duo_config.tuner_address); } } @@ -1077,11 +1084,11 @@ static int dvb_init(struct saa7134_dev *dev) if (dev->dvb.frontend) { if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { - printk("%s: No tda826x found!\n", __FUNCTION__); + wprintk("%s: No tda826x found!\n", __FUNCTION__); } if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - printk("%s: No ISL6421 found!\n", __FUNCTION__); + wprintk("%s: No ISL6421 found!\n", __FUNCTION__); } } break; @@ -1115,12 +1122,12 @@ static int dvb_init(struct saa7134_dev *dev) configure_tda827x_fe(dev, &philips_tiger_s_config); break; default: - printk("%s: Huh? unknown DVB card?\n",dev->name); + wprintk("Huh? unknown DVB card?\n"); break; } if (NULL == dev->dvb.frontend) { - printk("%s: frontend initialization failed\n",dev->name); + printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); return -1; }