From: Ladislav Michl Date: Mon, 19 Jun 2023 20:11:43 +0000 (+0200) Subject: MIPS: OCTEON: octeon-usb: use bitfields for control register X-Git-Tag: v6.6.17~4398^2~12 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ce942c0f69c2e492f3d2be27b1a42cdbf59f6b1c;p=platform%2Fkernel%2Flinux-rpi.git MIPS: OCTEON: octeon-usb: use bitfields for control register Code needs to compile for all platforms in order to move it to drivers/usb/dwc3. Use Linux standard bitfield access macros to manipulate control register. Signed-off-by: Ladislav Michl Signed-off-by: Thomas Bogendoerfer --- diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c index 4d22eaa..e8e57d0 100644 --- a/arch/mips/cavium-octeon/octeon-usb.c +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -8,16 +8,117 @@ * for more details. */ -#include +#include +#include #include -#include #include -#include #include +#include +#include +#include #include +/* + * USB Control Register + */ #define USBDRD_UCTL_CTL 0x00 +/* BIST fast-clear mode select. A BIST run with this bit set + * clears all entries in USBH RAMs to 0x0. + */ +# define USBDRD_UCTL_CTL_CLEAR_BIST BIT(63) +/* 1 = Start BIST and cleared by hardware */ +# define USBDRD_UCTL_CTL_START_BIST BIT(62) +/* Reference clock select for SuperSpeed and HighSpeed PLLs: + * 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock + * 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock + * 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + * 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + */ +# define USBDRD_UCTL_CTL_REF_CLK_SEL GENMASK(61, 60) +/* 1 = Spread-spectrum clock enable, 0 = SS clock disable */ +# define USBDRD_UCTL_CTL_SSC_EN BIT(59) +/* Spread-spectrum clock modulation range: + * 0x0 = -4980 ppm downspread + * 0x1 = -4492 ppm downspread + * 0x2 = -4003 ppm downspread + * 0x3 - 0x7 = Reserved + */ +# define USBDRD_UCTL_CTL_SSC_RANGE GENMASK(58, 56) +/* Enable non-standard oscillator frequencies: + * [55:53] = modules -1 + * [52:47] = 2's complement push amount, 0 = Feature disabled + */ +# define USBDRD_UCTL_CTL_SSC_REF_CLK_SEL GENMASK(55, 47) +/* Reference clock multiplier for non-standard frequencies: + * 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * Other Values = Reserved + */ +# define USBDRD_UCTL_CTL_MPLL_MULTIPLIER GENMASK(46, 40) +/* Enable reference clock to prescaler for SuperSpeed functionality. + * Should always be set to "1" + */ +# define USBDRD_UCTL_CTL_REF_SSP_EN BIT(39) +/* Divide the reference clock by 2 before entering the + * REF_CLK_FSEL divider: + * If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal + * If REF_CLK_SEL = 0x2 or 0x3, then: + * 0x1 = DLMC_REF_CLK* is 125MHz + * 0x0 = DLMC_REF_CLK* is another supported frequency + */ +# define USBDRD_UCTL_CTL_REF_CLK_DIV2 BIT(38) +/* Select reference clock freqnuency for both PLL blocks: + * 0x27 = REF_CLK_SEL is 0x0 or 0x1 + * 0x07 = REF_CLK_SEL is 0x2 or 0x3 + */ +# define USBDRD_UCTL_CTL_REF_CLK_FSEL GENMASK(37, 32) +/* Controller clock enable. */ +# define USBDRD_UCTL_CTL_H_CLK_EN BIT(30) +/* Select bypass input to controller clock divider: + * 0x0 = Use divided coprocessor clock from H_CLKDIV + * 0x1 = Use clock from GPIO pins + */ +# define USBDRD_UCTL_CTL_H_CLK_BYP_SEL BIT(29) +/* Reset controller clock divider. */ +# define USBDRD_UCTL_CTL_H_CLKDIV_RST BIT(28) +/* Clock divider select: + * 0x0 = divide by 1 + * 0x1 = divide by 2 + * 0x2 = divide by 4 + * 0x3 = divide by 6 + * 0x4 = divide by 8 + * 0x5 = divide by 16 + * 0x6 = divide by 24 + * 0x7 = divide by 32 + */ +# define USBDRD_UCTL_CTL_H_CLKDIV_SEL GENMASK(26, 24) +/* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB3_PORT_PERM_ATTACH BIT(21) +/* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB2_PORT_PERM_ATTACH BIT(20) +/* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB3_PORT_DISABLE BIT(18) +/* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB2_PORT_DISABLE BIT(16) +/* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_SS_POWER_EN BIT(14) +/* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_HS_POWER_EN BIT(12) +/* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_CSCLK_EN BIT(4) +/* Controller mode: 0x0 = Host, 0x1 = Device */ +# define USBDRD_UCTL_CTL_DRD_MODE BIT(3) +/* PHY reset */ +# define USBDRD_UCTL_CTL_UPHY_RST BIT(2) +/* Software reset UAHC */ +# define USBDRD_UCTL_CTL_UAHC_RST BIT(1) +/* Software resets UCTL */ +# define USBDRD_UCTL_CTL_UCTL_RST BIT(0) + #define USBDRD_UCTL_BIST_STATUS 0x08 #define USBDRD_UCTL_SPARE0 0x10 #define USBDRD_UCTL_INTSTAT 0x30 @@ -30,123 +131,6 @@ #define USBDRD_UCTL_ECC 0xf0 #define USBDRD_UCTL_SPARE1 0xf8 -/* USB Control Register */ -union cvm_usbdrd_uctl_ctl { - uint64_t u64; - struct cvm_usbdrd_uctl_ctl_s { - /* 1 = BIST and set all USB RAMs to 0x0, 0 = BIST */ - __BITFIELD_FIELD(uint64_t clear_bist:1, - /* 1 = Start BIST and cleared by hardware */ - __BITFIELD_FIELD(uint64_t start_bist:1, - /* Reference clock select for SuperSpeed and HighSpeed PLLs: - * 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock - * 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock - * 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock & - * HighSpeed PLL uses PLL_REF_CLK for reference clck - * 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock & - * HighSpeed PLL uses PLL_REF_CLK for reference clck - */ - __BITFIELD_FIELD(uint64_t ref_clk_sel:2, - /* 1 = Spread-spectrum clock enable, 0 = SS clock disable */ - __BITFIELD_FIELD(uint64_t ssc_en:1, - /* Spread-spectrum clock modulation range: - * 0x0 = -4980 ppm downspread - * 0x1 = -4492 ppm downspread - * 0x2 = -4003 ppm downspread - * 0x3 - 0x7 = Reserved - */ - __BITFIELD_FIELD(uint64_t ssc_range:3, - /* Enable non-standard oscillator frequencies: - * [55:53] = modules -1 - * [52:47] = 2's complement push amount, 0 = Feature disabled - */ - __BITFIELD_FIELD(uint64_t ssc_ref_clk_sel:9, - /* Reference clock multiplier for non-standard frequencies: - * 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * Other Values = Reserved - */ - __BITFIELD_FIELD(uint64_t mpll_multiplier:7, - /* Enable reference clock to prescaler for SuperSpeed functionality. - * Should always be set to "1" - */ - __BITFIELD_FIELD(uint64_t ref_ssp_en:1, - /* Divide the reference clock by 2 before entering the - * REF_CLK_FSEL divider: - * If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal - * If REF_CLK_SEL = 0x2 or 0x3, then: - * 0x1 = DLMC_REF_CLK* is 125MHz - * 0x0 = DLMC_REF_CLK* is another supported frequency - */ - __BITFIELD_FIELD(uint64_t ref_clk_div2:1, - /* Select reference clock freqnuency for both PLL blocks: - * 0x27 = REF_CLK_SEL is 0x0 or 0x1 - * 0x07 = REF_CLK_SEL is 0x2 or 0x3 - */ - __BITFIELD_FIELD(uint64_t ref_clk_fsel:6, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_31_31:1, - /* Controller clock enable. */ - __BITFIELD_FIELD(uint64_t h_clk_en:1, - /* Select bypass input to controller clock divider: - * 0x0 = Use divided coprocessor clock from H_CLKDIV - * 0x1 = Use clock from GPIO pins - */ - __BITFIELD_FIELD(uint64_t h_clk_byp_sel:1, - /* Reset controller clock divider. */ - __BITFIELD_FIELD(uint64_t h_clkdiv_rst:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_27_27:1, - /* Clock divider select: - * 0x0 = divide by 1 - * 0x1 = divide by 2 - * 0x2 = divide by 4 - * 0x3 = divide by 6 - * 0x4 = divide by 8 - * 0x5 = divide by 16 - * 0x6 = divide by 24 - * 0x7 = divide by 32 - */ - __BITFIELD_FIELD(uint64_t h_clkdiv_sel:3, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_22_23:2, - /* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb3_port_perm_attach:1, - /* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb2_port_perm_attach:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_19_19:1, - /* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb3_port_disable:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_17_17:1, - /* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb2_port_disable:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_15_15:1, - /* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t ss_power_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_13_13:1, - /* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t hs_power_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_5_11:7, - /* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t csclk_en:1, - /* Controller mode: 0x0 = Host, 0x1 = Device */ - __BITFIELD_FIELD(uint64_t drd_mode:1, - /* PHY reset */ - __BITFIELD_FIELD(uint64_t uphy_rst:1, - /* Software reset UAHC */ - __BITFIELD_FIELD(uint64_t uahc_rst:1, - /* Software resets UCTL */ - __BITFIELD_FIELD(uint64_t uctl_rst:1, - ;))))))))))))))))))))))))))))))))) - } s; -}; - /* UAHC Configuration Register */ union cvm_usbdrd_uctl_host_cfg { uint64_t u64; @@ -297,14 +281,10 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base) static int dwc3_octeon_clocks_start(struct device *dev, u64 base) { - union cvm_usbdrd_uctl_ctl uctl_ctl; - int ref_clk_sel = 2; - u64 div; + int i, mpll_mul, ref_clk_fsel, ref_clk_sel = 2; u32 clock_rate; - int mpll_mul; - int i; - u64 h_clk_rate; - u64 uctl_ctl_reg = base; + u64 div, h_clk_rate, val; + u64 uctl_ctl_reg = base + USBDRD_UCTL_CTL; if (dev->of_node) { const char *ss_clock_type; @@ -368,16 +348,16 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */ /* Step 3: Assert all resets. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uphy_rst = 1; - uctl_ctl.s.uahc_rst = 1; - uctl_ctl.s.uctl_rst = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = cvmx_read_csr(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_UPHY_RST | + USBDRD_UCTL_CTL_UAHC_RST | + USBDRD_UCTL_CTL_UCTL_RST; + cvmx_write_csr(uctl_ctl_reg, val); /* Step 4a: Reset the clock dividers. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_rst = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = cvmx_read_csr(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_H_CLKDIV_RST; + cvmx_write_csr(uctl_ctl_reg, val); /* Step 4b: Select controller clock frequency. */ for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) { @@ -386,26 +366,29 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) h_clk_rate >= OCTEON_MIN_H_CLK_RATE) break; } - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_sel = div; - uctl_ctl.s.h_clk_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - if ((div != uctl_ctl.s.h_clkdiv_sel) || (!uctl_ctl.s.h_clk_en)) { + val = cvmx_read_csr(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_H_CLKDIV_SEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_H_CLKDIV_SEL, div); + val |= USBDRD_UCTL_CTL_H_CLK_EN; + cvmx_write_csr(uctl_ctl_reg, val); + val = cvmx_read_csr(uctl_ctl_reg); + if ((div != FIELD_GET(USBDRD_UCTL_CTL_H_CLKDIV_SEL, val)) || + (!(FIELD_GET(USBDRD_UCTL_CTL_H_CLK_EN, val)))) { dev_err(dev, "dwc3 controller clock init failure.\n"); return -EINVAL; } /* Step 4c: Deassert the controller clock divider reset. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val &= ~USBDRD_UCTL_CTL_H_CLKDIV_RST; + cvmx_write_csr(uctl_ctl_reg, val); /* Step 5a: Reference clock configuration. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.ref_clk_sel = ref_clk_sel; - uctl_ctl.s.ref_clk_fsel = 0x07; - uctl_ctl.s.ref_clk_div2 = 0; + val = cvmx_read_csr(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_REF_CLK_DIV2; + val &= ~USBDRD_UCTL_CTL_REF_CLK_SEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_SEL, ref_clk_sel); + + ref_clk_fsel = 0x07; switch (clock_rate) { default: dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n", @@ -414,7 +397,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) case 100000000: mpll_mul = 0x19; if (ref_clk_sel < 2) - uctl_ctl.s.ref_clk_fsel = 0x27; + ref_clk_fsel = 0x27; break; case 50000000: mpll_mul = 0x32; @@ -423,28 +406,32 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) mpll_mul = 0x28; break; } - uctl_ctl.s.mpll_multiplier = mpll_mul; + val &= ~USBDRD_UCTL_CTL_REF_CLK_FSEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_FSEL, ref_clk_fsel); + + val &= ~USBDRD_UCTL_CTL_MPLL_MULTIPLIER; + val |= FIELD_PREP(USBDRD_UCTL_CTL_MPLL_MULTIPLIER, mpll_mul); /* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */ - uctl_ctl.s.ssc_en = 1; + val |= USBDRD_UCTL_CTL_SSC_EN; /* Step 5c: Enable SuperSpeed. */ - uctl_ctl.s.ref_ssp_en = 1; + val |= USBDRD_UCTL_CTL_REF_SSP_EN; /* Step 5d: Configure PHYs. SKIP */ /* Step 6a & 6b: Power up PHYs. */ - uctl_ctl.s.hs_power_en = 1; - uctl_ctl.s.ss_power_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val |= USBDRD_UCTL_CTL_HS_POWER_EN; + val |= USBDRD_UCTL_CTL_SS_POWER_EN; + cvmx_write_csr(uctl_ctl_reg, val); /* Step 7: Wait 10 controller-clock cycles to take effect. */ udelay(10); /* Step 8a: Deassert UCTL reset signal. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uctl_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = cvmx_read_csr(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UCTL_RST; + cvmx_write_csr(uctl_ctl_reg, val); /* Step 8b: Wait 10 controller-clock cycles. */ udelay(10); @@ -454,22 +441,22 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) return -EINVAL; /* Step 8d: Deassert UAHC reset signal. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uahc_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = cvmx_read_csr(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UAHC_RST; + cvmx_write_csr(uctl_ctl_reg, val); /* Step 8e: Wait 10 controller-clock cycles. */ udelay(10); /* Step 9: Enable conditional coprocessor clock of UCTL. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.csclk_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = cvmx_read_csr(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_CSCLK_EN; + cvmx_write_csr(uctl_ctl_reg, val); /*Step 10: Set for host mode only. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.drd_mode = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = cvmx_read_csr(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_DRD_MODE; + cvmx_write_csr(uctl_ctl_reg, val); return 0; } @@ -491,11 +478,12 @@ static void __init dwc3_octeon_set_endian_mode(u64 base) static void __init dwc3_octeon_phy_reset(u64 base) { - union cvm_usbdrd_uctl_ctl uctl_ctl; + u64 val; + u64 uctl_ctl_reg = base + USBDRD_UCTL_CTL; - uctl_ctl.u64 = cvmx_read_csr(base + USBDRD_UCTL_CTL); - uctl_ctl.s.uphy_rst = 0; - cvmx_write_csr(base + USBDRD_UCTL_CTL, uctl_ctl.u64); + val = cvmx_read_csr(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UPHY_RST; + cvmx_write_csr(uctl_ctl_reg, val); } static int __init dwc3_octeon_device_init(void)