From: Fabio Estevam Date: Fri, 26 Apr 2013 06:01:26 +0000 (+0000) Subject: mx23: Put back RAM voltage level to its original value X-Git-Tag: v2013.07-rc1~85^2~64 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=cdc203682fcfcc53486cc68edbcf14e33b13ed27;p=kernel%2Fu-boot.git mx23: Put back RAM voltage level to its original value commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR voltage level, which causes mx23evk to fail to load a kernel. Put back the original values, so that mx23evk can boot a kernel again. Signed-off-by: Fabio Estevam Tested-by: Robert Nelson --- diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index bc2d69c..4950490 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -234,7 +234,7 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; - writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_ILIMIT | POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_PULLDOWN_ACTIVE, @@ -242,7 +242,7 @@ static void mx23_mem_setup_vddmem(void) early_delay(10000); - writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_LINREG, &power_regs->hw_power_vddmemctrl); }