From: Alan Stern Date: Wed, 28 Mar 2012 19:56:17 +0000 (-0400) Subject: USB: don't ignore suspend errors for root hubs X-Git-Tag: v3.4-rc3~23^2~9 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=cd4376e23a59a2adf3084cb5f4a523e6d5fd4e49;p=profile%2Fivi%2Fkernel-x86-ivi.git USB: don't ignore suspend errors for root hubs This patch (as1532) fixes a mistake in the USB suspend code. When the system is going to sleep, we should ignore errors in powering down USB devices, because they don't really matter. The devices will go to low power anyway when the entire USB bus gets suspended (except for SuperSpeed devices; maybe they will need special treatment later). However we should not ignore errors in suspending root hubs, especially if the error indicates that the suspend raced with a wakeup request. Doing so might leave the bus powered on while the system was supposed to be asleep, or it might cause the suspend of the root hub's parent controller device to fail, or it might cause a wakeup request to be ignored. The patch fixes the problem by ignoring errors only when the device in question is not a root hub. Signed-off-by: Alan Stern Reported-by: Chen Peter CC: Tested-by: Chen Peter Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f8e2d6d..9a56635 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (status == 0) { status = usb_suspend_device(udev, msg); - /* Again, ignore errors during system sleep transitions */ - if (!PMSG_IS_AUTO(msg)) + /* + * Ignore errors from non-root-hub devices during + * system sleep transitions. For the most part, + * these devices should go to low power anyway when + * the entire bus is suspended. + */ + if (udev->parent && !PMSG_IS_AUTO(msg)) status = 0; }