From: Robert Marko Date: Thu, 18 Aug 2022 22:06:26 +0000 (+0200) Subject: clk: qcom: apss-ipq-pll: add support for IPQ8074 X-Git-Tag: v6.1-rc5~153^2~7^6~4^2~31 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=cca7b7d5f168dc0da83429e4f5c0bfbd53c9a456;p=platform%2Fkernel%2Flinux-starfive.git clk: qcom: apss-ipq-pll: add support for IPQ8074 Add support for IPQ8074 since it uses the same PLL setup, however it uses slightly different Alpha PLL config. Alpha PLL config was obtained by dumping PLL registers from a running device. Signed-off-by: Robert Marko Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220818220628.339366-7-robimarko@gmail.com --- diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c index a4016f3..a5aea27 100644 --- a/drivers/clk/qcom/apss-ipq-pll.c +++ b/drivers/clk/qcom/apss-ipq-pll.c @@ -49,6 +49,18 @@ static const struct alpha_pll_config ipq6018_pll_config = { .test_ctl_hi_val = 0x4000, }; +static const struct alpha_pll_config ipq8074_pll_config = { + .l = 0x48, + .config_ctl_val = 0x200d4828, + .config_ctl_hi_val = 0x6, + .early_output_mask = BIT(3), + .aux2_output_mask = BIT(2), + .aux_output_mask = BIT(1), + .main_output_mask = BIT(0), + .test_ctl_val = 0x1c000000, + .test_ctl_hi_val = 0x4000, +}; + static const struct regmap_config ipq_pll_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -89,6 +101,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev) static const struct of_device_id apss_ipq_pll_match_table[] = { { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config }, + { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config }, { } }; MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);