From: Wenbin Mei Date: Thu, 28 Jul 2022 08:00:48 +0000 (+0800) Subject: mmc: mtk-sd: Clear interrupts when cqe off/disable X-Git-Tag: v6.6.17~6752^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=cc5d1692600613e72f32af60e27330fe0c79f4fe;p=platform%2Fkernel%2Flinux-rpi.git mmc: mtk-sd: Clear interrupts when cqe off/disable Currently we don't clear MSDC interrupts when cqe off/disable, which led to the data complete interrupt will be reserved for the next command. If the next command with data transfer after cqe off/disable, we process the CMD ready interrupt and trigger DMA start for data, but the data complete interrupt is already exists, then SW assume that the data transfer is complete, SW will trigger DMA stop, but the data may not be transmitted yet or is transmitting, so we may encounter the following error: mtk-msdc 11230000.mmc: CMD bus busy detected. Signed-off-by: Wenbin Mei Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220728080048.21336-1-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 4ff73d1..69d7860 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -2446,6 +2446,9 @@ static void msdc_cqe_disable(struct mmc_host *mmc, bool recovery) /* disable busy check */ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL); + val = readl(host->base + MSDC_INT); + writel(val, host->base + MSDC_INT); + if (recovery) { sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1); @@ -2932,11 +2935,14 @@ static int __maybe_unused msdc_suspend(struct device *dev) struct mmc_host *mmc = dev_get_drvdata(dev); struct msdc_host *host = mmc_priv(mmc); int ret; + u32 val; if (mmc->caps2 & MMC_CAP2_CQE) { ret = cqhci_suspend(mmc); if (ret) return ret; + val = readl(host->base + MSDC_INT); + writel(val, host->base + MSDC_INT); } /*