From: wdenk <wdenk>
Date: Fri, 29 Aug 2003 10:05:53 +0000 (+0000)
Subject: Add I2C and RTC support for RMU board using software I2C driver
X-Git-Tag: U-Boot-0_4_7~3
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ca75added10524a1f8e439e904ba72cb74c917a4;p=kernel%2Fu-boot.git

Add I2C and RTC support for RMU board using software I2C driver
(because of better response to iprobe command); fix problem with
"reset" command
---

diff --git a/CHANGELOG b/CHANGELOG
index 3bb17eb..f49ddb9 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
 Changes for U-Boot 0.4.7:
 ======================================================================
 
+* Add I2C and RTC support for RMU board using software I2C driver
+  (because of better response to iprobe command); fix problem with
+  "reset" command
+
 * Patch by Matthias Fuchs, 28 Aug 2003:
   Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
   CONFIG_BOOTP_MAKS (see README).
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index 7b33c7e..c0c4083 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -61,8 +61,39 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+
+#define CFG_I2C_SPEED		40000	/* 40 kHz is supposed to work	*/
+#define CFG_I2C_SLAVE		0xFE
+
+/* Software (bit-bang) I2C driver configuration */
+#define PB_SCL		0x00000020	/* PB 26 */
+#define PB_SDA		0x00000010	/* PB 27 */
+
+#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+
+/* M41T11 Serial Access Timekeeper(R) SRAM */
+#define CONFIG_RTC_M41T11 1
+#define CFG_I2C_RTC_ADDR 0x68
+#define CFG_M41T11_BASE_YEAR 1900	/* play along with the linux driver */
+
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_I2C	)
+
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -153,6 +184,11 @@
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
 /*-----------------------------------------------------------------------
+ * Reset address
+ */
+#define	CFG_RESET_ADDRESS	((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+
+/*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
diff --git a/include/watchdog.h b/include/watchdog.h
index b9ae916..7180259 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -85,16 +85,4 @@
 	void reset_4xx_watchdog(void);
 #endif
 
-/* MPC 8260 */
-#if defined(CONFIG_MPC8260) && !defined(__ASSEMBLY__)
-#if defined(CONFIG_WATCHDOG)
-extern __inline__ void
-reset_8260_watchdog(volatile immap_t *immr)
-{
-	immr->im_siu_conf.sc_swsr = 0x556c;
-	immr->im_siu_conf.sc_swsr = 0xaa39;
-}
-#endif /* !__ASSEMBLY__ && CONFIG_WATCHDOG */
-#endif /* CONFIG_MPC8260 && !__ASSEMBLY__ */
-
 #endif /* _WATCHDOG_H_ */