From: Felipe Balbi Date: Fri, 8 Aug 2008 09:40:54 +0000 (+0300) Subject: usb: musb: pass configuration specifics via pdata X-Git-Tag: v2.6.27-rc4~101^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=ca6d1b1333bc2e61e37982de1f28d8604c232414;p=platform%2Fkernel%2Flinux-3.10.git usb: musb: pass configuration specifics via pdata Use platform_data to pass musb configuration-specific details to musb driver. This patch will prevent that other platforms selecting HAVE_CLK and enabling musb won't break tree building. The other parts of it will come when linux-omap merge up more omap2/3 board-files. Signed-off-by: Felipe Balbi Acked-by: Paul Mundt Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 1607c94..10ef464 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 6, status); return -ENODEV; } - data->multipoint = 1; tusb_device.dev.platform_data = data; /* REVISIT let the driver know what DMA channels work */ diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 462586d..d68ec6d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -990,12 +990,6 @@ static void musb_shutdown(struct platform_device *pdev) * We don't currently use dynamic fifo setup capability to do anything * more than selecting one of a bunch of predefined configurations. */ -#ifdef MUSB_C_DYNFIFO_DEF -#define can_dynfifo() 1 -#else -#define can_dynfifo() 0 -#endif - #if defined(CONFIG_USB_TUSB6010) || \ defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) static ushort __initdata fifo_mode = 4; @@ -1008,8 +1002,6 @@ module_param(fifo_mode, ushort, 0); MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration"); -#define DYN_FIFO_SIZE (1<<(MUSB_C_RAM_BITS+2)) - enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed)); enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed)); @@ -1119,11 +1111,12 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, c_size = size - 3; if (cfg->mode == BUF_DOUBLE) { - if ((offset + (maxpacket << 1)) > DYN_FIFO_SIZE) + if ((offset + (maxpacket << 1)) > + (1 << (musb->config->ram_bits + 2))) return -EMSGSIZE; c_size |= MUSB_FIFOSZ_DPB; } else { - if ((offset + maxpacket) > DYN_FIFO_SIZE) + if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2))) return -EMSGSIZE; } @@ -1219,13 +1212,13 @@ static int __init ep_config_from_table(struct musb *musb) /* assert(offset > 0) */ /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would - * be better than static MUSB_C_NUM_EPS and DYN_FIFO_SIZE... + * be better than static musb->config->num_eps and DYN_FIFO_SIZE... */ for (i = 0; i < n; i++) { u8 epn = cfg->hw_ep_num; - if (epn >= MUSB_C_NUM_EPS) { + if (epn >= musb->config->num_eps) { pr_debug("%s: invalid ep %d\n", musb_driver_name, epn); continue; @@ -1242,8 +1235,8 @@ static int __init ep_config_from_table(struct musb *musb) printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n", musb_driver_name, - n + 1, MUSB_C_NUM_EPS * 2 - 1, - offset, DYN_FIFO_SIZE); + n + 1, musb->config->num_eps * 2 - 1, + offset, (1 << (musb->config->ram_bits + 2))); #ifdef CONFIG_USB_MUSB_HDRC_HCD if (!musb->bulk_ep) { @@ -1270,7 +1263,7 @@ static int __init ep_config_from_hw(struct musb *musb) /* FIXME pick up ep0 maxpacket size */ - for (epnum = 1; epnum < MUSB_C_NUM_EPS; epnum++) { + for (epnum = 1; epnum < musb->config->num_eps; epnum++) { musb_ep_select(mbase, epnum); hw_ep = musb->endpoints + epnum; @@ -1424,14 +1417,14 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) musb->epmask = 1; if (reg & MUSB_CONFIGDATA_DYNFIFO) { - if (can_dynfifo()) + if (musb->config->dyn_fifo) status = ep_config_from_table(musb); else { ERR("reconfigure software for Dynamic FIFOs\n"); status = -ENODEV; } } else { - if (!can_dynfifo()) + if (!musb->config->dyn_fifo) status = ep_config_from_hw(musb); else { ERR("reconfigure software for static FIFOs\n"); @@ -1788,7 +1781,8 @@ static void musb_irq_work(struct work_struct *data) */ static struct musb *__init -allocate_instance(struct device *dev, void __iomem *mbase) +allocate_instance(struct device *dev, + struct musb_hdrc_config *config, void __iomem *mbase) { struct musb *musb; struct musb_hw_ep *ep; @@ -1820,8 +1814,9 @@ allocate_instance(struct device *dev, void __iomem *mbase) musb->mregs = mbase; musb->ctrl_base = mbase; musb->nIrq = -ENODEV; + musb->config = config; for (epnum = 0, ep = musb->endpoints; - epnum < MUSB_C_NUM_EPS; + epnum < musb->config->num_eps; epnum++, ep++) { ep->musb = musb; @@ -1929,7 +1924,7 @@ bad_config: } /* allocate */ - musb = allocate_instance(dev, ctrl); + musb = allocate_instance(dev, plat->config, ctrl); if (!musb) return -ENOMEM; @@ -1987,7 +1982,7 @@ bad_config: musb_generic_disable(musb); /* setup musb parts of the core (especially endpoints) */ - status = musb_core_init(plat->multipoint + status = musb_core_init(plat->config->multipoint ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC, musb); if (status < 0) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 90035c1..eade46d 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -56,18 +56,6 @@ struct musb_ep; #include "musb_debug.h" #include "musb_dma.h" -#ifdef CONFIG_USB_MUSB_SOC -/* - * Get core configuration from a header converted (by cfg_conv) - * from the Verilog config file generated by the core config utility - * - * For now we assume that header is provided along with other - * arch-specific files. Discrete chips will need a build tweak. - * So will using AHB IDs from silicon that provides them. - */ -#include -#endif - #include "musb_io.h" #include "musb_regs.h" @@ -440,6 +428,8 @@ struct musb { struct usb_gadget_driver *gadget_driver; /* its driver */ #endif + struct musb_hdrc_config *config; + #ifdef MUSB_CONFIG_PROC_FS struct proc_dir_entry *proc_entry; #endif diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h index db6dad0..ab8c962 100644 --- a/drivers/usb/musb/tusb6010.h +++ b/drivers/usb/musb/tusb6010.h @@ -230,173 +230,4 @@ extern u8 tusb_get_revision(struct musb *musb); #define TUSB_REV_30 0x30 #define TUSB_REV_31 0x31 -/*----------------------------------------------------------------------------*/ - -#ifdef CONFIG_USB_TUSB6010 - -/* configuration parameters specific to this silicon */ - -/* Number of Tx endpoints. Legal values are 1 - 16 (this value includes EP0) */ -#define MUSB_C_NUM_EPT 16 - -/* Number of Rx endpoints. Legal values are 1 - 16 (this value includes EP0) */ -#define MUSB_C_NUM_EPR 16 - -/* Endpoint 1 to 15 direction types. C_EP1_DEF is defined if either Tx endpoint - * 1 or Rx endpoint 1 are used. - */ -#define MUSB_C_EP1_DEF - -/* C_EP1_TX_DEF is defined if Tx endpoint 1 is used */ -#define MUSB_C_EP1_TX_DEF - -/* C_EP1_RX_DEF is defined if Rx endpoint 1 is used */ -#define MUSB_C_EP1_RX_DEF - -/* C_EP1_TOR_DEF is defined if Tx endpoint 1 and Rx endpoint 1 share a FIFO */ -/* #define C_EP1_TOR_DEF */ - -/* C_EP1_TAR_DEF is defined if both Tx endpoint 1 and Rx endpoint 1 are used - * and do not share a FIFO. - */ -#define MUSB_C_EP1_TAR_DEF - -/* Similarly for all other used endpoints */ -#define MUSB_C_EP2_DEF -#define MUSB_C_EP2_TX_DEF -#define MUSB_C_EP2_RX_DEF -#define MUSB_C_EP2_TAR_DEF -#define MUSB_C_EP3_DEF -#define MUSB_C_EP3_TX_DEF -#define MUSB_C_EP3_RX_DEF -#define MUSB_C_EP3_TAR_DEF -#define MUSB_C_EP4_DEF -#define MUSB_C_EP4_TX_DEF -#define MUSB_C_EP4_RX_DEF -#define MUSB_C_EP4_TAR_DEF - -/* Endpoint 1 to 15 FIFO address bits. Legal values are 3 to 13 - corresponding - * to FIFO sizes of 8 to 8192 bytes. If an Tx endpoint shares a FIFO with an Rx - * endpoint then the Rx FIFO size must be the same as the Tx FIFO size. All - * endpoints 1 to 15 must be defined, unused endpoints should be set to 2. - */ -#define MUSB_C_EP1T_BITS 5 -#define MUSB_C_EP1R_BITS 5 -#define MUSB_C_EP2T_BITS 5 -#define MUSB_C_EP2R_BITS 5 -#define MUSB_C_EP3T_BITS 3 -#define MUSB_C_EP3R_BITS 3 -#define MUSB_C_EP4T_BITS 3 -#define MUSB_C_EP4R_BITS 3 - -#define MUSB_C_EP5T_BITS 2 -#define MUSB_C_EP5R_BITS 2 -#define MUSB_C_EP6T_BITS 2 -#define MUSB_C_EP6R_BITS 2 -#define MUSB_C_EP7T_BITS 2 -#define MUSB_C_EP7R_BITS 2 -#define MUSB_C_EP8T_BITS 2 -#define MUSB_C_EP8R_BITS 2 -#define MUSB_C_EP9T_BITS 2 -#define MUSB_C_EP9R_BITS 2 -#define MUSB_C_EP10T_BITS 2 -#define MUSB_C_EP10R_BITS 2 -#define MUSB_C_EP11T_BITS 2 -#define MUSB_C_EP11R_BITS 2 -#define MUSB_C_EP12T_BITS 2 -#define MUSB_C_EP12R_BITS 2 -#define MUSB_C_EP13T_BITS 2 -#define MUSB_C_EP13R_BITS 2 -#define MUSB_C_EP14T_BITS 2 -#define MUSB_C_EP14R_BITS 2 -#define MUSB_C_EP15T_BITS 2 -#define MUSB_C_EP15R_BITS 2 - -/* Define the following constant if the USB2.0 Transceiver Macrocell data width - * is 16-bits. - */ -/* #define C_UTM_16 */ - -/* Define this constant if the CPU uses big-endian byte ordering. */ -/* #define C_BIGEND */ - -/* Define the following constant if any Tx endpoint is required to support - * multiple bulk packets. - */ -/* #define C_MP_TX */ - -/* Define the following constant if any Rx endpoint is required to support - * multiple bulk packets. - */ -/* #define C_MP_RX */ - -/* Define the following constant if any Tx endpoint is required to support high - * bandwidth ISO. - */ -/* #define C_HB_TX */ - -/* Define the following constant if any Rx endpoint is required to support high - * bandwidth ISO. - */ -/* #define C_HB_RX */ - -/* Define the following constant if software connect/disconnect control is - * required. - */ -#define MUSB_C_SOFT_CON - -/* Define the following constant if Vendor Control Registers are required. */ -/* #define C_VEND_REG */ - -/* Vendor control register widths. */ -#define MUSB_C_VCTL_BITS 4 -#define MUSB_C_VSTAT_BITS 8 - -/* Define the following constant to include a DMA controller. */ -/* #define C_DMA */ - -/* Define the following constant if 2 or more DMA channels are required. */ -/* #define C_DMA2 */ - -/* Define the following constant if 3 or more DMA channels are required. */ -/* #define C_DMA3 */ - -/* Define the following constant if 4 or more DMA channels are required. */ -/* #define C_DMA4 */ - -/* Define the following constant if 5 or more DMA channels are required. */ -/* #define C_DMA5 */ - -/* Define the following constant if 6 or more DMA channels are required. */ -/* #define C_DMA6 */ - -/* Define the following constant if 7 or more DMA channels are required. */ -/* #define C_DMA7 */ - -/* Define the following constant if 8 or more DMA channels are required. */ -/* #define C_DMA8 */ - -/* Enable Dynamic FIFO Sizing */ -#define MUSB_C_DYNFIFO_DEF - -/* Derived constants. The following constants are derived from the previous - * configuration constants - */ - -/* Total number of endpoints. Legal values are 2 - 16. This must be equal to - * the larger of C_NUM_EPT, C_NUM_EPR - */ -/* #define MUSB_C_NUM_EPS 5 */ - -/* C_EPMAX_BITS is equal to the largest endpoint FIFO word address bits */ -#define MUSB_C_EPMAX_BITS 11 - -/* C_RAM_BITS is the number of address bits required to address the RAM (32-bit - * addresses). It is defined as log2 of the sum of 2** of all the endpoint FIFO - * dword address bits (rounded up). - */ -#define MUSB_C_RAM_BITS 12 - -#endif /* CONFIG_USB_TUSB6010 */ - #endif /* __TUSB6010_H__ */ diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d325a0d..630962c 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -19,6 +19,36 @@ enum musb_mode { struct clk; +struct musb_hdrc_eps_bits { + const char name[16]; + u8 bits; +}; + +struct musb_hdrc_config { + /* MUSB configuration-specific details */ + unsigned multipoint:1; /* multipoint device */ + unsigned dyn_fifo:1; /* supports dynamic fifo sizing */ + unsigned soft_con:1; /* soft connect required */ + unsigned utm_16:1; /* utm data witdh is 16 bits */ + unsigned big_endian:1; /* true if CPU uses big-endian */ + unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */ + unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */ + unsigned high_iso_tx:1; /* Tx ep required for HB iso */ + unsigned high_iso_rx:1; /* Rx ep required for HD iso */ + unsigned dma:1; /* supports DMA */ + unsigned vendor_req:1; /* vendor registers required */ + + u8 num_eps; /* number of endpoints _with_ ep0 */ + u8 dma_channels; /* number of dma channels */ + u8 dyn_fifo_size; /* dynamic size in bytes */ + u8 vendor_ctrl; /* vendor control reg width */ + u8 vendor_stat; /* vendor status reg witdh */ + u8 dma_req_chan; /* bitmask for required dma channels */ + u8 ram_bits; /* ram address size */ + + struct musb_hdrc_eps_bits *eps_bits; +}; + struct musb_hdrc_platform_data { /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */ u8 mode; @@ -38,16 +68,14 @@ struct musb_hdrc_platform_data { /* (HOST or OTG) msec/2 after VBUS on till power good */ u8 potpgt; - /* TBD: chip defaults should probably go someplace else, - * e.g. number of tx/rx endpoints, etc - */ - unsigned multipoint:1; - /* Power the device on or off */ int (*set_power)(int state); /* Turn device clock on or off */ int (*set_clock)(struct clk *clock, int is_on); + + /* MUSB configuration-specific details */ + struct musb_hdrc_config *config; };