From: Aidan MacDonald Date: Sat, 12 Nov 2022 15:18:32 +0000 (+0000) Subject: mfd: stpmic1: Fix swapped mask/unmask in irq chip X-Git-Tag: v6.6.17~5863^2~18 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=c79e387389d5add7cb967d2f7622c3bf5550927b;p=platform%2Fkernel%2Flinux-rpi.git mfd: stpmic1: Fix swapped mask/unmask in irq chip The usual behavior of mask registers is writing a '1' bit to disable (mask) an interrupt; similarly, writing a '1' bit to an unmask register enables (unmasks) an interrupt. Due to a longstanding issue in regmap-irq, mask and unmask registers were inverted when both kinds of registers were present on the same chip, ie. regmap-irq actually wrote '1's to the mask register to enable an IRQ and '1's to the unmask register to disable an IRQ. This was fixed by commit e8ffb12e7f06 ("regmap-irq: Fix inverted handling of unmask registers") but the fix is opt-in via mask_unmask_non_inverted = true because it requires manual changes for each affected driver. The new behavior will become the default once all drivers have been updated. The STPMIC1 has a normal mask register with separate set and clear registers. The driver intends to use the set & clear registers with regmap-irq and has compensated for regmap-irq's inverted behavior, and should currently be working properly. Thus, swap mask_base and unmask_base, and opt in to the new non-inverted behavior. Signed-off-by: Aidan MacDonald Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20221112151835.39059-16-aidanmacdonald.0x0@gmail.com --- diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c index 54a4d59..8db1530 100644 --- a/drivers/mfd/stpmic1.c +++ b/drivers/mfd/stpmic1.c @@ -108,8 +108,9 @@ static const struct regmap_irq stpmic1_irqs[] = { static const struct regmap_irq_chip stpmic1_regmap_irq_chip = { .name = "pmic_irq", .status_base = INT_PENDING_R1, - .mask_base = INT_CLEAR_MASK_R1, - .unmask_base = INT_SET_MASK_R1, + .mask_base = INT_SET_MASK_R1, + .unmask_base = INT_CLEAR_MASK_R1, + .mask_unmask_non_inverted = true, .ack_base = INT_CLEAR_R1, .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS, .irqs = stpmic1_irqs,